Screwed flange are often used for small diameter, high pressure requirements. Screwed flanges with a hub have published specifications that range from 1/2 thru 24. Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 and Facing: RF / RTJ. Screwed flanges are threaded in the bore which match an external thread on the pipe. Screwed flanges are used with pipes that have external threads. The benefit of these flanges is that it can be attached without welding.
This is similar to the slip-on Flange in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. The Flange may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing its use in pressure applications. DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE SIZE : 1/8" to 48" (As Per Customer Requirement) CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc MATERIAL GRADE : Stainless Steel Screwed Flange : ASTM A 182, A 240?Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L Duplex stainless steel Screwed Flange : UNS S31803, 2205, Super Duplex stainless steel UNS S32750 Carbon Steel Screwed Flange : ASTM A 105, ASTM A 181 Alloy Steel Screwed Flange : ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys Screwed Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276 Copper Alloys Screwed Flange : ASTM / ASME SB 61 / 62 / 151 / 152 C 70600 (CU -NI- 90/10) C 71500 (CU -NI- 70/30) UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100 C 10200, C 10300, C 10800, C 12000, C 12200 VALUE ADDED SERVICES : Hot Dip Galvanizing Test Certificate As Per EN 10204 - 3.1 & 3.2
Threaded flanges are not suitable for pipelines with thin wall thicknesses because it is difficult to cut threads on such pipelines. Description Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
Threaded flanges are not suitable for pipelines with thin wall thicknesses because it is difficult to cut threads on such pipelines. Description Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
Description:- Screwed or Threaded Flanges Range: - 15 NB TO 1500NB (1/2 to 60") ANSI B 16.5 (150#, 300#, 400#, 600#, 900#, 1500# & 2500#) Material: Stainless Steel - ASTM A-182 (304, 304L, 316, 316L Carbon Steel - ASTM A-105, A-350 LF2, IS 2062, AS 516 Gr. 70, C45 Alloy Steel - ASTM A-182 F5, F9, F11, F12, F21, F22.
Double flange ballnut. C7 Rolled and C3,C5 Ground Ballscrew are available. The model for BSF series Ballscrew included: 1605 ,1610 ,2005 ,2010 , 2505 ,2510 ,3205 ,3210 FBT Ballscrew Features: 1)High Reliability 2)High Precision 3)Smooth Movement 4)High Axial Stiffness 5)OEM/ODM Production.
Price - Rs.190 Box Material : Mild Steel Thread Type : mm Head Shape : Star Brand : ST Finish ; White Zinc,Auto Black Packaging Type : Bag
Material: SUJ2 || Ball: G10 || C3/C5 Industrial: Semiconductor, Medical, Micro Movement Brand: Taiwan (Wei Tai Transmission Company) Inquiry data sheets: service (a) weitaitransmission.com
Supplier: Hex nut, hex bolts, washers, hub bolts, screws, truck tie rod ends, flange nuts, drywall screws, square nuts, concrete nails, nylon fixing anchors, scaffolding products and many other spl items
Hex Flange Head Self Drilling Screws With Epdm Washer
