Nominal outside diameter: 50mm Wall thickness: 2mm Length: 4m PVC pipe (Polyvinylchlorid), main composition is polyvinyl chloride, add other compositions to enhance thermal resistance, toughness and ductility. Widely used both at home and abroad. PVC-U pipe has longer service life and better corrosion resistance than cast iron pipe. In addition, it's lighter in weight and easier to install. Image brand PVC-U pipes and fittings PVC-U drainage pipe fittings meet the national standard GB/T5836.1-2006 and GB/T5836.2-2006. Something about price: Our products will fluctuate with the price of raw material and the MOQ. And we can manufacture special specification as customer requested Normal packing
Nominal outside diameter: 32mm Wall thickness: 3.6mm Length: 4m Characters of PP-R: 1.Healthy and non-toxicity: our products are green construction materials, can be used as drinking water system. 2.Corrosion resistant and non-scaling: avoid stain in the basin and bath caused by corrosion, blockage caused by scale. 3.Withstand high-heat and high-pressure :the highest water temperature is 95ípC. 4.Good capability of heat preservation and energy saving: 1/200 thermal conductivity of metal pipes. 5.Light in weight: 1/7 of metal pipes. 6.Fine appearance: smoothbore, small flow resistance, soft colours and attractive design. 7.Easy installation: hot melt connectivity techmology, safe and reliable.8.Long service life: under the regulated long-term continuous working pressure up to 50 years. Normal packing
HDPE silicon-core pipe is a kind of communication optical (electric) cable protection tubing, which is produced and shaped through extruding synchronistically the silicon-core material with low friction coefficient inside HDPE pipe. Thus the HDPE silicon-core pipe provides the convenience for the cable laying because of the lubricating solid tunnel with durability and lower frication coefficient. It becomes the most advanced optical cable protection in world at present. Its advancement is presented on the replacement of cable personal pulling. The cable-blowing machine will blow the cable into the lower friction HDPE pipe and the cable goes forward at high speed in the suspension state. This cable laying way avoids the cable damages caused by the pulling. The cable blown once can reach more 2000 meters. For that, the accidental signal loss caused by machine pulling has been reduced greatly and the too many knots resulted from the pulling length limitation has been decreased greatly. At the same time, the well digging quantities have been minimized and the project cost has been saved. The HOPE silicon-core pipe has the high intensity, excellent property resisting high or low temperature, adaptability for steepness and bending changes. Nominal(internal/external diameter):26/32mm,28/34mm,33/40mm,38/46mm,42/50mm,50/60mm etc.
Early or late, Mingzhu Company has introduced eight extruding product lines reached international advanced level. The product lines have been equipped with online test system for the pipe wall thickness. The real time inspection and control for the wall thickness guaranteed the quality's stability. In addition to more than 1,300,000 meters pipes with all specifications, the gas pipes production capacity has reached 50,000 tons per year. The output and sale volume take the first position at domestic in present. í(Product Specification: Nominal (outside diameter): 25-630mm Pressure Grades: SDR11, SDR17.6 Appearance: Yellow pipe, black pipe with yellow stripes
The PE water supply pipe is extruded by the extruding product lines with special purpose polyethylene material. The pipes apply to cities and towns water supply pipeline net, irrigation and channel water project, garbage treatment site, sewage collecting pipeline project and agriculture spray irrigation project. Because the PE pipeline adopts the thermal fusion and electric fusion connection technologies, the interface has been integrated and the pipeline can resist the hoop stress and axial shock resistant stress produced by inside pressure. In addition, the PE pipe does not contain the heavy metalsalt stabilizer. The second pollution for drinking water is avoided for the pipe material no toxic, no pipe scale and not breeding bacteria. Product Specificationú¦Nominal (outside diameter): 25-630mm series Pressure Grades: SDR11
Mingzhu Company's PE/Steel transition pipes are buried underground. It applies to the pipeline system with the environment temperature -20íµ-40íµ and the maximum working pressure no more than 1.0MPa.The PE/Steel transition pipes can be used in the pipeline system according prEN 1555 or ISO4437.Using this kind of fitting will be great convinent, safety and reliability, low project cost and durable. Full types and specification, having the seamless steel pipe welding pattern (straight pipe, bend pipe),the seamless steel pipe thread pattern, and nodular cast iron thread pattern etc. Special,stucture,high intensity, excellent airtight property, no leaking. Anti-corrosion treatment for the metal part, be durable. The metal part can be made of copper or stainless steel etc according to the customer's requirement.
Size from 20mm to 160mm, including adaptor, elbow, tee, etc.
Pex is cross-linked polyethylene. Through one of several processes, links between polyethylene molecules are formed to create bridges (thus the term "cross-linked). This resulting material is more durable under temperature extremes, chemical attack, and better resists creep deformation, making pex an excellent material for hot water and other applications. E-mail us for details, please
Steady Performance. Working Life 50 years for water application. High Mechanical strength. Easy to carry & reducing transportation and handling cost. 6 to 8 times lighter then GI & CI Pipes. Smooth inner surface prevents growth of bacteria hence making pumping easier and faster. HDPE Pipes are available in suitable coils of 50mm to 200mm & also available in straight length of 5 to 6 Meters which can reduce Joints, Bends, Tees & Caps etc.
Variety kinds of fixing materials (clamps), including multifunctional profiles, dowels, nuts, Screws, bolts, pipe clamps( pipe clamps with head, pipe clamps with nut, pipe clamps with combi nut, pipe clamps for heavy load with nut, pipe clamps for heavy load with head, pipe clamps with bolt, pipe clamps used for ventilation purposes, pipe clamps with (without) rubber, double pipe clamps, multifunctional clamps. Channels as (u, c), g-clips and other products.
1.We pruduce carbon steel pipe fittings. 2.High quality and competitive price 3.Standard: ASTM A234 ,MSS SP-75 ,ASME B16.9 ,ASME16.28 , JIS, DIN,GB, SNSI 4..Material:A234-WPB,A420-WPL6,A234-WP12,A234-WP11,A234-WP5,A403-WP304, A403-WP304L,A403-WP316.A403-WP316L 5.Packaging: As per customer requirement (wooden cases wooden pallet,etc.) 6. Certificate: GB/T19001-2000-ISO9001:2000 7.Minimum Order Quantity: According to customer's requirement 8.Lead Time:According customer's requirement 9.Quanlity: First grade 10.Applications: Petroleum, chemical, power, gas, construction, metallurgy, etc . Wooden cases, pallets.
Steel wire helix hose Application: Especally ideal for ventilation and air conditioning system, industrial vacuum cleaner, and granulate conveying systems. As suction and transport hose suitable for below substance. Gaseous medias such as vapors and smoke. Liquid medias. Small granultes such as dusts,powders and ect. Features: Highly flexible with low weigh Extremely compressible Smooth interior Highly transparent wall Small bending radius Working temperature range -20 degree to +70 degree. Material: Wall:Soft PVC Spiral:Pvc coated steel wire.
Pvc tubing 1.0mmm-50.0mm
Application: As suction and transport hose especially suitable for below substance. Gaseous and liquid medias. Small solids such as dusts,powders,chips and grains. Also ideal as ventilation hose for air conditioning and ventilation system. Features: Extremely tearing-resistant with rigid reinforced pvc helix Very smooth interior Flexible with low weight Extremely transparent High tensile strength and tear resistant Could be resistant to chemicals if requested. Could be resistant to UV if requested. Various of sizes available Wall thickness could be from 0.4mm to 4mm Wall material variable: PVC and PU Working temperature range -20 ¬C to +70 ¬C Material: Wall: Top grade of PVC or PU Spiral: Rigid PVC.
Name:the carbon steel reducer Specifications:3/4"*1/2"---48"*40" [dn20*15---1200*1000] Thickness:sch 5s---160 Standard:gb, anis, jis, bs, din Material:carbon steel, stainless steel, alloy steel Quailty:all the productions process are made under the iso 9001:2000 strictly. Price:because of the instability of the price, you can contact to us directly according to the way of contact.We are sure that we have the reasonable price. Use:the carbon sttel reducer is applied to the petroleum, chemical industry, electricity, metallurgy, shipbuilding extensively, industries such as gas burning, urban consturctions, hot-water heating, war industries, fire control and environment protection, etc. Wooden cases or wooden pallets or according to the customer's requirement
Name:carbon steel elbow Specification:1/2"---72" dn15---dn2000 Thickness:sch 5s---160 Materials:carbon steel, stainless steel, alloy steel Quality:all the production process are made under the iso 9001:2000 strictly. Price:because of the instability of the price, you can contact to us directly according to the way of contact.We are sure that we have reasonable prices . Use: the carbon steel elbow is applied to the petroleum , chemical industry, eletricity, metallurgy, shipbuilding extensively, industries such as gas burning, urban constructions, hot-water heating, war industry, fire control and environment protection, etc. Wooden cases or wooden pallets or according to the customer's requirement.
Name:stainless steel elbow Specification:1/2"---72" dn15---dn2000 Thickness:sch 5s---160 Materials:carbon steel, stainless steel, alloy steel Quality:all the production process are made under the iso 9001:2000 strictly. Price:because of the instability of the price, you can contact to us directly according to the way of contact.We are sure that we have reasonable prices . Use: the carbon steel elbow is applied to the petroleum , chemical industry, eletricity, metallurgy, shipbuilding extensively, industries such as gas burning, urban constructions, hot-water heating, war industry, fire control and environment protection, etc. Wooden cases or wooden pallets or according to the customer's requirement.
We are leading supplier of flanges, elbow and tee manufactured from mild steel, plain carbon steel & stainless steel from sizes 1/2ö û 20ö in forged as well as machined conditions .
PVC pipe fittings Size :1/2" ~ 16" Material : PVC,CPVC,ABS,UPVC Color : light grey, dark grey,white,orange,(other colors available on request) Quality : pass ISO 9001 / CNS 2334 Details are: 45 and 90 degree elbow tee and reducing tee male and female adapter coupling and reducing coupling cap, cap for pipe raft 45 degree wye p trap with solvent weldjoint and cleanout plug cleanout bushing sanitary tee flange, union fitting with brass insert compression coupling pvc ball valve(two pieces) ball valve stainless steel(two pieces) double union ball valve butterfly valve-lever handle foot valve - socket / threaded swing foot valve - socket / threaded swing foot valve - flanged end foot valve - hose end -socket swing check valve - socket / threaded swing check valve - flanged end
PVC 45 degree elbow Size : drainage 1-1/2"x2mm ~ 12"x10mm Water supply 1-1/2" ~ 12" PVC 90 degree elbow Size : drainage 1-1/2"x2mm ~ 14"x11mm Water supply 1/2" ~ 12"
