E glass chopped strand mat E glass chopped strand mat is made from e-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent. 1. Excellent impregnation properties 2. Excellent conformability 3. Good mechanical properties 4. Good drapability 5. High tensile strength
E-cr roving, e glass roving boron-free, low boron E-cr roving boron-free is a kind of continuous e glass roving, boron-free. Ecr roving is unbonded borosilicate e glass fiber; it is capable of withstanding severe thermal shock and vibration. E-cr roving is stable in serious environment; it shows exceptional recovery from compression, does not accelerate corrosion of metallic components. E-cr roving exhibits excellent acoustic properties, marking it suitable for use in many types of hot silencing applications, including exhausts with high gas flow rates. 6. Withstanding severe thermal shock and vibration Techinical papameters Specifications E-cr roving is available from 300tex to 9600tex. 20 pallets/ 20'fcl Aprx. 20 metric tons/20'fcl
Light weight, good strenghth Carton
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
02, 04, 06, 08 02, 04, 06, 08
D16-24mm length 1200-2600mm Rod ultimate load 80-160kn Pallet size:120x120x6 120x120x10 150x150x8 150x150x10 150x150x10
We, rell composite , specializing in grp molded gratings, grp pultruded gratings, grp pole, square tube, round tube, i beam, wide flange beam, equal angle, c channel, flat panel, solid panel, fiberglass board, flat tube, kick plate, y shaped angle, high strength deck panel, flat strip, grp round/square rod, stair nosing, stair tread, stair cover, handrail, ladder, drain cover, manhole cover, grp fittings, gratings clips, grp flanges, grp fittings, grp cable trays, frp/grp hand-lay-up custom products and so on.
We, rell composite , specializing in grp molded gratings, grp pultruded gratings, grp pole, square tube, round tube, i beam, wide flange beam, equal angle, c channel, flat panel, solid panel, fiberglass board, flat tube, kick plate, y shaped angle, high strength deck panel, flat strip, grp round/square rod, stair nosing, stair tread, stair cover, handrail, ladder, drain cover, manhole cover, grp fittings, gratings clips, grp flanges, grp fittings, grp cable trays, frp/grp hand-lay-up custom products and so on.
Our range of ladders are : Series discription Fs 1000 self supported step ladder Fs 2000 self supported step ladder Fm 1000 self supported step trestle ladder Fm 2000 self supported step trestle ladder Fh 1000 wall supported self ladder Fp 1000 self supported platform ladder Fp 1100 self supported platform ladder with hand rail & castor Fp 2000 self supported trestle ladder with foldable platform Fe 2000 wall supported extension ladder Fe 3000 wall supported extension ladder Fe 8400 ladder for manhole application Fe 8000 industrial step stand Fpm 1000 mobile platform for maintenance ( single ) Fpm 1100 mobile patform for maintenance ( double ) Fm 4000 self supported step trestle ladder with extension ladder
Sumip luminaries are available in totally enclosed grp housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in chemical, fertilizer, cement, rayon plants, and also industries/power plants located in coastal areas. Construction The luminaire housing is hot press molded glass reinforced plastic (grp). Glass Wellglass - heat resistance glass is provided with synthetic rubber gasket. Highbay/ mediumbay - teflon glass with rubber gasket provided. Retaining frame/ wire guard Strong stainless steel wire guard is provided to hold & protect the well glass. Holder Ceramic es or bc lamp holders are provided as per customer requirement of high grade quality. Ballast & igniter & capacitor For integral type luminaries heavy duty copper wound ballast, capacitor & igniter where ever applicable, are fitted right above the lamp holder assembly. Entries One no 3/4" bs conduit entry is provided for incoming cable with brass/ polyamide cable gland with check nut. Hardware All hardware provided are ss 316. Suspension Frp coated eye bolt is provided on top with good quality grommet to absorb the vibration. Alternatively ss 316 clamps can also be provided.
Sumip ladder & perforated type cable tray provides reliable cable support in corrosive application. Both polyester & vinyl ester resin systems are available & all components incorporating u.V. Stabilizer & a surfacing veil to resist corrosive atmosphere. From power plants to fertilizer industries, paper mills to refineries to laboratories, sound electrical design requires an adaptable cable support system that is reliable. Above all durability & resistance to corrosion lead to lower costs during the life of installation. Featuring * corrosion resistance * strength & durability * fire redundant * light weight * u.V. Stabilities * long life Applications * chemical plants * power plants * effluent treatment plants * offshore platforms * paper plants * refineries
Fiberglass street light poles E.G.Tt/lc/dp/da Sumip makes grp light poles are constructed of polyester blend resin system & fiberglass rowings with mare than 70% of reinforcing fiberglass in the axial vertical plane which increases desired rigidity & axial strength . The pole ishaft is manufactured by cnc filament winding procees . Types of lighting poles : * burial light poles * platform light poles Advantages of grp poles: * light weight * non conductive * corrosion resistant * low maintenance * high strength * aesthetic * economical
Trefoil clamps are used for high voltage single core cables where the current rating is high & 3 core cables are not available . Sumip trefoil clamps are used for laying single core cables in trefoil touching formation which helps to maintain magnetic symmetry thereby avoiding electromagnetic heating and loss of current .Sumip trefoil clamps have been moulded from glass fibre filled material . Advantage of sumip trefoil clamps High mechanical strength Center distance between trefoil clamps can be increased for lower fault level than 50 ka & hence total Requirements of clamps can be reduced thereby reduction in cost. Long service life as practically not affected by all chemicals, acids and alkalis. Design of clamp & good flexural strength gives good grip on cable & accommodates slight deviation in diameter of cable.
Reinforced fiberglass mesh High strength mesh, eifs mesh available, strong and flexible mesh 1.Fiberglass mesh for wall reinforces; 2.Mainly used for interior wall and external wall reinforces, eifs construction, and etc; 3. Various color available, width range:0.6m-1.1m; 4.Customized service available Mesh weight: 70gsm, 80gsm, 90gsm, 110gsm, 120gsm, 135gsm, 145gsm, 150gsm, 160gsm, 165gsm, 300gsm. Any color available. Size:1x50m/roll Mesh size:4x4mm, 5x5mm, 10x10mm, 12x12mm, etc
Fiberglass tape, high tensile strength tape, with continous glass filament, clean removal Fiberglass tape, high tensile strength tape, with continous glass filament, clean removal, especially for large merchandise. Applications: 1. Securing and stablizing large home appliance or furniture during shipping, preventing components from abrasion and scuff. 2. Pallentizing of cartons and boxes during shipping; reinforcing boxes, protecting contents from pilferage. 3. Pipeline stablizing. 4. Strapping rods, moulding, tubes plywood danger of scratching, staining or damaging. Available size: Jumbo roll: 1020mm 1000m Finished rolls: as customers' requirement. 5mmx90m/roll, weight, packing as your per requirement
Fiberglass duct rodder Duct rodder is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered by a high density polyethylene engineering plastic as it protect layer, which make duct rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit. Duct rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move. Features and benefits: Light weight, durable, resistance to acid, aging resistant, corrosion resistant High tensile strength and bending properties, which make it to go through narrow pipes easily. Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. It is usability will not be affected by temperature. Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability. cover was coated with long-term UV-resistant polyethylene. it surface has the advantage of smooth, wear-resistant and long service life. There are meter mark on the protect layer of duct rodder. The length is 100m to 400m. There are kinds of colors for the rod to choose. Technical Data of Duct Rodders: 1. Reinforce Fiberglass core Property Data and Value Reinforcement E-Glass Fiber Glass content of inner part 80-85% Material of pulling rod Epoxy fiber glass(inner) and high density polyethylene(outer) Density >150g/m Diameter tolerence ¡À0.10mm Work situation temperature -40 ~ +80 Mechanical properties Property data Min pulling strength 4000N 5% Tensile modulus >30000 MPa Consistency of rod 150g ¡ 5% Flexural modulus >30000 MPa Elongation at Break 2.5-3% 2. Polyethylene cover Material: Medium Density polyethylene resin for the insulating and jacketing of telecommunication cables. Property Data Tensile strength >150N Environmental stress & crack resistance >1000 hr Heat stability ok Carbon Black ok plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Cable pulling rod & push duct rodder & fiber snake rod Epoxy duct rodder is the continuous rods sizes are 4.5mm 6mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm, the duct rodders¡¯ lenghth is range 50m to 400m. Duct rodders/rods features Strong non-conductive fiberglass rod construction Stainless steel drawing head For longer conduit runs and underground duct Rugged tubular steel reel with adjustable position. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling electric tools, and it repair is very easy, and available. Glass fiber rod diameter 4-16mm Length 100-400m Working temperature -40 ~ +80 Min bend radius 390mm Breaking tension 4500-9000kg Glassfiber density 150g/m Plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
