The combination of laminating an aluminum glass fiber cloth heat shield to a layer of protective fiberglass insulation protects personnel or equipments by reflecting radiant heat.It is always used for fireproof,welding blanket,fire cloth;sleeves and hoods.
0.4mm E- Glass Fiber Red Silicon Coated for Engineered Thermal Insulation is one of Jotex Composite Materials Co.,Ltd.'s hot sale materials.Its width from 1000mm to 3200mm. And the thickness can be from 40g per side to 80 g per side. Of course,Double coating is available.
30% Fiberglass filled Polypropylene granules from verified and clean recycle materials. Fiber glass added to PP within extrusion process. +MFI: 54 MPa. +Density: 1,05 g/cm3 +Tensile strength: 55 MPa +Impact Resistance 12 kJ/m2 (Izod notched) +Natural (All tests performed according to relevant ISO standarts.) Delivery terms: FOB Istanbul - Turkey (Other options possible when/if agreed).
SMOKELESS FIBERGLASS NEEDLED MAT Product Smokeless fiberglass needled mat, ordorless fiberglass needled mat Material E-glass Thickness mm 3mm-10mm Density 111-50kg/m³ Thermal conductivity 0.032 0.039W/m 25 Max temp. 700 Long term temp. 550 Features Eco-friendly, smokeless, ordorless The product (smokeless fiberglass needled mat, odorless fiberglass needled mat) is made from fiberglass as the material. How is a smokelss fiberglass needled mat manufactured? And what is its feature? It undergoes a heating process in different stages to carbonize trace organic substances within the fiberglass wool. During the carbonization process, there may be a slight odor and smoke generated. After the baking process, the surface of the product can exhibit either a white or yellowish color, depending on the baking temperature. Compared to fiberglass wool that hasn't undergone baking, the baked fiberglass wool retains its original properties while eliminating the generation of smoke and odor when subjected to reheating between 200-500C. Why does an oven(home appliance) need ther thermal insulation(smokeless fiberglass needled mat, odorless fiberglass needled mat)? This odorless fiberglass needled mat is usually used as thermal insulation( liner or pad) for home appliances such as environmentally sensitive grills, ovens, disinfection cabinet, microwaves and other appliances, which are subject to strict environmental regulations. If a domestic appliance (eg. oven) is added with this thermal insulation , it will be more energy efficient to prevent heat escaping from the oven and it will reach temperature faster and reduce cooking time. The smokeless fiberglass needled mat is available in rolls or die cut pieces based on requests. The smokeless mat can be laminated with fiberglass fabric, foil facing, aluglass cloth facing,or coated with self adhesive based on your request. Small sample pieces are free and freight to collect.
Aspen FSK Tape 2"/3"/5"/6" x 20-40 yards 16Roll per Bundle
We are FiberTech India, Everything in Fiberglass we are into manufacturing of Fiberglass decorative products
FRP,also known as GRP,is a fibrous reinforced plastic. The advantages are :high strength,light weight, corrosion resistance,aging resistance,fire resistance, non-conducting,insulation and low recycling.It can replace steel manufacturing machine parts and cars,ship shells and so on. we are a manufacturer of a wide range of FRP products in china, which we export worldwide. Our main products are fiberglass covering parts in different fields, such as construction machinery,agriculture and livestock machinery,medical instrument, bathroom solutions and so on. our products include fiberglass engine cover,fiberglass bathroom unit,SMC fiberglass,fiberglass roof, etc. We can also produce the items as per your models. We have OEM experience and the experience in making both SMC and hand lay up products. Our main customers are:VOLVO,JCB,DOOSAN,SCHWING,etc.
We are a manufacturer of a wide range of FRP products in China, which we export worldwide.Our main products are parts of construction machinery, such as engineer hood, bumper,hood,fender,sunshading board and so on. We can also produce the items as per your models. FRP,also known as GRP,is a fibrous reinforced plastic.Light and hard,non-conducting,high mechanical strength,low recycling and corrosin resistance.It can replace steel manufacturing machine parts and cars,ship shells and so on.
Product Information: The fiberglass knitted stitched felt is made by cutting the fiberglass raw yarn into a certain length, randomly and uniformly distributed, and then stitched with stitching thread. It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Weight(g/m2): 300g/m2~1800g/m2 Width(mm): 100mm-3900mm. Also can select to add the Polyester veil (30g/40g) or chopping layer(300g) according to the customer's requirement. Product Specifications CMK300: C-glass, 300±20g/m2, 100-3900mm Width; CMK380: C-glass, 380±20g/m2, 100-3900mm Width; EMK250: E-glass, 250±10g/m2, 100-3900mm Width; EMK300: E-glass, 300±15g/m2, 100-3900mm Width; EMK380: E-glass, 380±15g/m2, 100-3900mm Width; EMK450: E-glass, 450±20g/m2, 100-3900mm Width; EMK600: E-glass, 600±25g/m2, 100-3900mm Width; Applications: It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Packaging Information: It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
Product Information: Fiber glass cloth is a multi-directional reinforced fabric made of glass fiber yarn, with plain weave, twill weave, satin weave. Fiberglass cloth is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity. 1. Suitable for reinforced unsaturated resin, vinyl resin, epoxy resin, phenolic resin 2. Widely used in hand lay-up, pultrusion, winding and vacuum infusion and other processes 3. This new material product has already covered many domains such as electric appliances, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Terminal products include: pultruded profiles, auto parts, yachts, pipes, plates, sports equipment, wind energy blades and other FRP products. Product Specifications EW25: 25±1g/m2, 100-3200mm Width, Plain; EW50: 50±2g/m2, 100-3200mm Width, Plain; EW80: 80±3g/m2, 100-3200mm Width, Plain; EW100: 100±3g/m2, 100-3200mm Width, Plain; EW135: 135±4g/m2, 100-3200mm Width, Plain; EW160: 160±5g/m2, 100-3200mm Width, Plain; EW200: 200±6g/m2, 100-3200mm Width, Plain; EW300: 300±9g/m2, 100-3200mm Width, Plain; EWT100: 100±3g/m2, 100-3200mm Width, Twill; EWT135: 135±4g/m2, 100-3200mm Width, Twill; EWT160: 160±5g/m2, 100-3200mm Width, Twill; EWT200: 200±6g/m2, 100-3200mm Width, Twill; EWT300: 300±9g/m2, 100-3200mm Width, Twill; EWS300: 300±9g/m2, 100-3200mm Width, Satin; Product Properties: 1.High intensity and quick wet out 2.Anti-corrosion and electric insulation Packaging Informationï¼? It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or woven bag. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Carbon Fiber Surface Mat is a non-woven tissue made from randomly oriented carbon fibers distributed in special binder by a wet lay process. It's a new super carbon material, with properties of high performance reinforced, high strength, high modulus, fire resistant, corrosion resistant, fatigue resistant composites. It's mainly applied to aerospace, medical instrument, sports equipment, conductivity, anti-static, and anti-spark properties and car parts etc. Product Specifications C-FM10: 10±1g/m2, 100-1300mm Width, Resistance()
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg Packaging: Each roll is wound on paper tube (3"-4"Dia.) with plastic film and packed in individual cardboard box. 16 or 12 cartons per Pallet. The strength of fiberglass stitched mat is stronger than CSM,the price is cheaper. We export large quantity for pipe winding.We can provide big roll to reduce your replacing frequency and save your cost.We suggest stitched mat instead of chopped strand mat for pipe application. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Fiberglass continuous mat provides fast, thorough wet-out.Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. And can be pre-wet and moved for proper placement in wet lay-up open molding... The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength. Properties: Fiberglass no certain direction,good homogeneity. No powder or emulsion,sink quickly and easy to operate. High tensile strength,esay to operate. Good impact strength of finished products.
Stitched fiberglass fabric (also called veilmat) is produced by stitching a polyester veil (tissue) to chopped strands. Polyester veil is around 45G/M2. Polyester veil has feature of anti-aging & water resistant, and also gives good surface to finished product. It is for pultrusion, especially for thin pultrusion product, closed mould process, or pipe winding. we export this materials to different countries like Exel composites in Australia, Iran, Ukraine, Italy, Malaysia and so on. Stitch type: Tricot stitch on veil side, pillar stitch on CS. The chopped length is 100mm. Gauge is F5(space between needles 7mm). Roll Length: Nominal linear 200meters +/-1m, the min width is from 150-3000mm.
Knitted mat is binderless characteristic, provides fast, thorough wet-out. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg
Fiber Glass Tape as the name suggests, is a woven fiberglass fabric along with a pressure sensitive adhesive system. These are non-alkali taps that show thermal resistance and insulation. It wrapped around an exhaust system in order to retain the heat for longer and improve engine efficiency. fiberglass wrap tape commonly used in construction and repair projects to provide additional strength and stability to a structure.
1. Overview Spiral chute is a new type of gravity concentration equipment for separating 0.6-0.05mm (can separate 2mm material under special circumstances) fine particle ore, including iron, ilmenite, chromite, pyrite, tungsten, tin, tantalum-niobium, alluvial gold, zircon, rutile, monazite, phosphorus and other non-ferrous metals, rare metals, non-metallic minerals with specific gravity difference. Spiral chute with advantages of stable dressing, clear separating, large capacity, high efficiency, strong adaptability to feeding capacity, density, granularity, fluctuations of grade, simple installation, small footprint, simple operation, moisture-proof, antirust , corrosion, no power, no moving parts, no noise, etc., it is particularly suitable for placer extracting in seaside, river, sand beach, and stream. 2. Structure Spiral chute is mainly composed of 9 parts as the following picture shows. And its main six types of models are with diameters of 2000mm, 1500mm, 1200mm, 900mm, 600mm, 400mm(laboratory use).
Description The Carbon Fiber Sheet or Carbon Fiber Plate is manufactured using 100% carbon fiber reinforcement and epoxy resin. The surface can choose from will /plain, matte/glossy. without any glass fiber contents. It is especially applicable for the FPV frame, helicopters, and RC airplanes. We are able to do Carbon Fiber CNC cutting Parts for RC Helicopter, RC cars, UAV frame, drone frame, multi-copter frame, camera gimbal frame or others per your specifications. Our factory use imported Japan TORAY or Taiwan TAIRYFIL carbon fiber fabric to make the carbon fiber plates/carbon fiber sheets. Feature 1.High Strength, Light Weight, Environmental, Durable Nice Surface, Fashion 2.Low Coefficiency Of Thermal Expansion, High-Temperature Resistance 3.Good Tenacity, Good Toughness, Low Coefficiency Of Thermal Expansion Application 1. Aerospace, Helicopters Model Drone , UAVS, FPV, RC Model Parts 2.Manufacture Fixtures And Tooling, Industrial Automation And Robotics 3.Sports Equipment, Musical Instruments, Medical Device 4.Building Construction Repair And Strengthening 5.Car Interior Decoration Parts, Art Products 6.Others
