Fiberglass duct rodder Duct rodder is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered by a high density polyethylene engineering plastic as it protect layer, which make duct rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit. Duct rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move. Features and benefits: Light weight, durable, resistance to acid, aging resistant, corrosion resistant High tensile strength and bending properties, which make it to go through narrow pipes easily. Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. It is usability will not be affected by temperature. Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability. cover was coated with long-term UV-resistant polyethylene. it surface has the advantage of smooth, wear-resistant and long service life. There are meter mark on the protect layer of duct rodder. The length is 100m to 400m. There are kinds of colors for the rod to choose. Technical Data of Duct Rodders: 1. Reinforce Fiberglass core Property Data and Value Reinforcement E-Glass Fiber Glass content of inner part 80-85% Material of pulling rod Epoxy fiber glass(inner) and high density polyethylene(outer) Density >150g/m Diameter tolerence ¡À0.10mm Work situation temperature -40 ~ +80 Mechanical properties Property data Min pulling strength 4000N 5% Tensile modulus >30000 MPa Consistency of rod 150g ¡ 5% Flexural modulus >30000 MPa Elongation at Break 2.5-3% 2. Polyethylene cover Material: Medium Density polyethylene resin for the insulating and jacketing of telecommunication cables. Property Data Tensile strength >150N Environmental stress & crack resistance >1000 hr Heat stability ok Carbon Black ok plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Cable pulling rod & push duct rodder & fiber snake rod Epoxy duct rodder is the continuous rods sizes are 4.5mm 6mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm, the duct rodders¡¯ lenghth is range 50m to 400m. Duct rodders/rods features Strong non-conductive fiberglass rod construction Stainless steel drawing head For longer conduit runs and underground duct Rugged tubular steel reel with adjustable position. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling electric tools, and it repair is very easy, and available. Glass fiber rod diameter 4-16mm Length 100-400m Working temperature -40 ~ +80 Min bend radius 390mm Breaking tension 4500-9000kg Glassfiber density 150g/m Plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Fibreglass duct rod/duct rodder/ fiberglass conduit rod description: Fiberglass duct rod applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable. Fibreglass duct rod/duct rodder/ fiberglass conduit rod features&benefits: 1. Strong non-conductive fiberglass rod construction 2. Stainless steel drawing head 3. For longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Glass fiber rod diameter 4-16mm Length 100-500m Working temperature -40+80 Min bend radius 295mm Breaking tension 4.5t Glassfiber density 150g/m Plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m
Silicone glassfiber sleeving is baided into tubes with non-alkli glassfiber , and then painted with silicone through high temperature .It has such features as excellent electricity-avoidness, flame off -self and flexibility.It is widely used in insulating protection of h&n grade automobile¡¢shipbuiding¡¢electrial machinery , home appliance, elctric&heat equipment , special lightware and internal wires bunching of tv and electronic equipment, etc technology index off-self time: 30seconds Type/file no. Testing condition lighting-resistance temperature-resistance inserting voltage average voltage individual value Sgs-15 e233804 ul1441 ul v w-1 +200-10 c 1500v 1000v Sgs-25 e233804 ul1441 ul v w-1 +200-10 b 2500v 1800v Srs-70 e233803 ul1441 ul v w-1 +200-10 a 7000v 5000v ¡¡ inside diameter measurement: Inside diameter the minimum wall thickness Range tolerance a grade b, c, grade 0.5-2.5mm +0.25-0.00mm 0.38mm 0.20mm 3.0-4.5mm +0.30-0.00mm 0.45mm 0.23mm 5.0-6.0mm +0.40-0.00mm 0.45mm 0.28mm 7.0-9.0mm +0.55-0.00mm 0.50mm 0.32mm 10.0-14.0mm +0.75-0.00mm 0.60mm 0.40mm 15.0-25.0mm +0.85-0.00mm 0.64mm 0.43mm. 100m/roll
Suitable for products that want to be lightweight and to enhance the rigidity and hardness. materials: 100% carbon fiber, 100% glass fiber, carbon fiber+ glass fiber or other materials. length x width:350x150mm¡b500x380mm¡b500x500mm¡b600x500mm¡b1000x600mm or other dimensions that is less than 1000x1000mm. thickness: 0.25~10mm(+/-0.1mm) appearance: glossy, general, matt application: remote control model helicopter, remote control model car, bicycle accessories, license plates, frames and so on.
Thermoplastic process is suitable for products with thickness that emphasized on rapid production line. our products can be injected directly with plastic material without applying any glue or the adhesive on products. carbon fiber material not only allow outsoles become lightweight, but also provides the stability and balance for the user. materials: 100% carbon fiber, 100% glass fiber, carbon fiber+ glass fiber, carbon fiber+titanium mesh or other materials. Applications: all kind of sport shoes, glasses frames, safety helmets¡ketc. Decoration on a variety of products.
Fiberglass roofing tissue is mainly used as excellent substrates for SBS and APP waterproofing membrane. The longitudinal strength and tear resistance be improved further by incorporating reinforcements into the tissue across its whole width. Main Features: 1, Fiber uniformly dispersed, flat is good 2, High tear strength 3, Dimensional stability, asphalt impregnated fast 4, Strong anti-embrittlement, aging, weathering 5, Excellent anti-leakage. 50g/m2.
Material: C-glass or E-glass Specs: weight: 60 to 350g/m2 Size: 2.5x2.5mm to 10x10mm Feature: 1. Excellent alkaline resistance and corrosion resistance 2. High tensile strength and impact resistance 3. Good dimensional stability and deformation resistance 4. Good adhesion with resins and water resistance 5. Temperature stability and flame resistance 6. Soft, flexible and well arranged, simple and easy to apply 7. Aging resistance 8. Durable, versatile and cost-effective Usage: used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Standard export packing or as request.
Industries Served: Applied in various sports equipent. We offer custom-made parts. Functions and Characteristic 1. Light weight, high strength. The specific weight of FRP pultrusion fiberglass tube is 1.8-2.1g/cm, only 1/4 of steel. It is easy for transportation and installation. Compared with plastic, the strength is ten times of plastic products. 2. Corrosion-resistance, anti-aging and with a long service life. It can be used in different corrosive environment, such as acid, alkali, salt, some organic solvent and so on. In the areas of corrosion-resistance, it has the superiority that other metals can not compared with. Adding to the characteristics of good resistance to water and aging, its service life could be expected to more than 15 years. 3. Good security. FRP pultrusion fiberglass tube has excellent electrical insulation, non-magnetic, no spark and can also be add the process of flameproof according to user¡¯s needs. 4. Good resistance to impact and can be designed freely. Better resistance to impact and fatigue make carbon fiber composite products can be bended repeated without permanent deformation. Otherwise, it can be designed into different sections according to the customers¡¯ demand. 5. Colourful and Economics. FRP pultrusion fiberglass tubes have various specifications and the colors can be designed according to customer¡¯s requirements. In addition, the price is affordable and have a good future. 10000.
C-glass fiber yarn E-glass fiber yarn. Film & carton & pallet.
Silicone Rubber Glassfiber insulating Sleeving(inside fiber and outside rubber Sleeve)is braided into tubes with non-alkali glassfiber,and then painted with silicone rubber through high temperature.It has better features than silicone glassfiber thbes in the aspect of electricity-avoidness,flame off-self and flexibility.It is widely used in insulating protection of H&N Grade automobile¡¢shipbuiding¡¢electrical machinery,home appliance,electric&heat equipment,special lightware.etc. Inside diameter measurement: Quick Details Place of Origin:Guangdong China (Mainland) Brand Name: hongch Type: Insulation Sleeving Material: Fiberglass Application: High Voltage Rated Voltage: 7kv; elasticity,: temperature :250C; certification: ISO9001,SGS ,UL Delivery Detail: 30days Specifications Has an excellent softness and flexibility and good dielectric and chemical resistance. Specifications: 1) Nominal inside diameter: 2.3 ~ 10.0mm 2) Maximum working temperature: 200-250oC 3) Breakdown voltage: 7000V.Size: 25 ~ 200m/roll; 1m/piece; others can be produced on request we passed the ISO9001.2000 quality system certification. as of 2011, all products have passed the SGS test and comply with the RoHS regulatory requirements. Silicone rubber glassfiber insulating sleeving(inside rubber and outside fiber)is extruded into tubes from silicone rubber, coated with braided glassfiber and then pained with silicone through high temperature .It has execellent insulating protection and temperature -resistance function. It is also widey used in insulating protection of h&n grade automobile¡¢shipbuilding¡¢electrial machinery , home appliance, electric&heat equipment , special lightware. White fiber bag.
Place of Origin:Guangdong China (Mainland) Brand Name: hongch Type: Insulation Sleeving Material: Fiberglass Application: High Voltage Rated Voltage: 7kv; elasticity,: temperature :250C; certification: ISO9001,SGS ,UL Delivery Detail: 30days Specifications Has an excellent softness and flexibility and good dielectric and chemical resistance. Specifications: 1) Nominal inside diameter: 2.3 ~ 10.0mm 2) Maximum working temperature: 200-250oC 3) Breakdown voltage: 7000V.Size: 25 ~ 200m/roll; 1m/piece; others can be produced on request We passed the ISO9001.2000 quality system certification. as of 2011, all products have passed the SGS test and comply with the RoHS regulatory requirements. White fiber bag
Silicone Glassfiber Sleeve is braided into tubes with non-alkali glassfiber ,and then painted with silicone through high temperature .It has such features as excellent electricity-avoidness,flame off -self and flexibility.It is widely used in insulating protection of H&N Grade automobile¡¢shipbuiding¡¢electrial machinery ,home appliance,elctric&heat equipment ,special lightware and internal wires bunching of TV and electronic equipment,etc.¡¡¡¡ Technology index Off-self time: 30seconds ,Has an excellent softness and flexibility and good dielectric and chemical resistance.It can be as wiring insulation and mechanical protection for electric motor, electric instrument and other other electric devices. Place of Origin: Guangdong China (Mainland) Brand Name: hongch Model Number: 2753 Type: Insulation Sleeving Material: Fiberglass A pplication: High Voltage Rated Voltage: 1.2-2.5kv elasticity,: temperature:250C Color: white redblack. Certification: ISO9001,SGS ,UL Delivery Detail: 25days. Specifications: 1) Nominal inside diameter: 1.0 ~ 20.0mm 2) Maximum working temperature: 250oC 3) Breakdown voltage: 1200 ~ 2,500V 4) Size: 25 ~ 200m/roll 1m/piece others can be produced on request Our company is covering an area of 15,000 square meters ,We passed the ISO9001.2000 quality system certification. as of 2011, all products have passed the SGS test and comply with the RoHS regulatory requirements. White fiber bag.
Silicone Rubber Glassfiber insulating Sleeving(inside rubber and outside fiber Sleeving)is extruded into tubes from silicone rubber,coated with braided glassfiber and then pained with silicone through high temperature .It has execellent insulating protection and temperature -resistance function. It is also widey used in insulating protection of H&N Grade automobile¡¢shipbuilding¡¢electrial machinery ,home appliance,electric&heat equipment ,special lightware.Etc. Has an excellent softness and flexibility and good dielectric and chemical resistance. Quick Details Place of Origin:Guangdong China (Mainland) Brand Name: hongch Type: Insulation Sleeving Material: Fiberglass Application: High Voltage Rated Voltage: 7kv; elasticity,: temperature :250C; certification: ISO9001,SGS ,UL Delivery Detail: 30days Specifications: 1) Nominal inside diameter: 2.3 ~ 10.0mm 2) Maximum working temperature: 200-250oC 3) Breakdown voltage: 7000V.Size: 25 ~ 200m/roll; 1m/piece; others can be produced on request we passed the ISO9001.2000 quality system certification. as of 2011, all products have passed the SGS test and comply with the RoHS regulatory requirements. White fiber bag.
Fiberglass chopped strands Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments. Yixing product characteristics: 1.Brand name:yixing fiberglass chopped strands 3.Filament diameter: 13um etc 4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to Your demand 5.Excellent clustering property, few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin, no fiber out product surface, good surface quality 8.Good strand integrity, low static, low fuzz, excellent mold flow ability 9.Quick wet-out by resin, excellent technical&mechanical properties 10.Water ratio:
Fiberglass chopped strands Chopped Strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins,such as polyester and phenol resin.Thermoplastics are used a wide range of industries,including the automotive,electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic PA, PBT,PET,PP,ABS,AS,etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry,household products,pump casing,anticorrosion chemistry and exercise equipments. Yixing Product Characteristics: 1.Brand name:Yixing Fiberglass chopped strands 2.Model number:yxcs8001 3.Filament diameter: 13um etc 4.Chopped length: 3mm,4.5mm,6mm,12mm,18mm etc We can produce some customized products with special requirement according to your demand 5.Excellent clustering property,few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin,no fiber out product surface,good surface quality 8.Good strand integrity,low static,low fuzz,excellent mold flow ability 9.Quick wet-out by resin,excellent technical&mechanical properties 10.Water ratio:
1.Fiberglass gegrid: 30*30KN-200*200KN 2.Ployester geogrid: 15*15KN-260*260KN 3.Steel-plastic composite Geogrid: 20*20KN-100*100KN 4.PP geogrid: 20*20KN-110*110KN 5.Biaxial Plastic Geogrid: 15*15KN-40*40KN 6.Uniaxial Plastic Geogrid: 35KN-150KN.
Fiberglass roving.
Fiberglass twisted roving.
Twisted fiberglass yarn with wire.
