The 300g reinforced alkali-resistant fiberglass mesh uses the machine-woven material of moderate-alkali or non-alkali as material and treats with alkali-proof coating. Because the strength and alkali-proof of the product are very good, it plays an important role in insulation system, and it is mainly used for exterior insulationí»s externally applied ceramic tiles 2m below of external walls to prevent crack. Because of its good resistance of chemical corrosion such as acid-proof and alkali-proof and high strength of longitude and latitude, it can distribute the stress on the insulation system of external walls, avoid deformation of the insulation system caused by external impact and pressure, improve the impact-resistance of the insulation. Besides, ití»s easy to install and quality control, it acts to the "soft steel bar" in the insulation system. Ordinary Specification: 1. Mesh size: 4mm*7mm 2. Weight/m2:300g 3. Length/roll: 50m 4. Width: 1m 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, four rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
Alkali-resistant fiberglass mesh is mainly used for ESP board (exterior insulation system of external walls), this product uses the machine-woven material of moderate-alkali or non-alkali as material and treats with alkali-proof coating. The strength and alkali-proof of the product are very good, and it plays an important role in insulation system, it is mainly used to prevent crack. Because of its good resistance of chemical corrosion such as acid-proof and alkali-proof and high strength of longitude and latitude, it can distribute the stress on the insulation system of external walls, avoid deformation of the insulation system caused by external impact and pressure, improve the impact-resistance of the insulation. Besides, ití»s easy to install and quality control, it acts to the í¦soft steel barí¦ in the insulation system. Ordinary Specification: 1. Mesh size: 4mm*4mm, 5mm*5mm 2. Weight/m2: 75g, 80g, 110g, 130g, 145g, 160g, 165g 3. Length/roll: 50m, 100m 4. Width: 1m, 2m 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, four rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
Fiberglass self-adhesive mesh tape is made by cutting high-quality fiberglass fabric coated with cyclic acid copolymer. Because fiberglass has a stable chemical property and isní»t liable to oxidate, the fiberglass self-adhesive tape developed and manufactured by our company not only has unexampled superiority than other similar products, it has some other features as follows: 1. Good alkali-resistance 2. High tensile strength and resistance to deformation 3. Excellent self-adhesiveness 4. Good smoothness 5. Convenient application in construction Ordinary Specification: 1. Mesh: 2.8mm*2.8mm, 3mm*3mm 2. Weight/m2: 65g-73g 3. Length/roll: 50m, 90m, 135m 4. Width: 5cm, 8cm, 10cm 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, 20 or 40 rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
The fiberglass window screen adopts the technique of fiberglass single filament PVC coating, plain weaving, and then heating up to sharp. It has characteristics of corrosion-resisting, easy-cleaning, non-deformation, ageing-resisting, and also has the performance of ventilation and sunshade. It is useful for preventing insects, mosquitoes and flies for office, residence and various buildings, livestock farms, fruit gardens and so on. Normal specification: 1. Color: black, gray, white, pale, green and so on 2. Mesh/inch: 18*16, 18*14, 16*14, 14*14 3. Width: 1m-2m 4. Packing: According to customers requirements 5. Histological structure: Plain weave, interweave We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
The ZrO2 alkali-proof fiberglass mesh uses the machine-woven fiberglass material of ZrO2-containing as material, and is immersed and coated by macromolecular alkali-resistant emulsion. The fiberglass mesh has good alkali-resistance and flexility, and its strength of longitude and latitude conform to national JG158-2004 standard, so it is widely used for exterior insulation system, water-proof and splitting-proof of external walls of building. Ordinary Specification: 1. Mesh size: 4mm*4mm 2. Weight/m2:165g 3. Length/roll: 50m, 100m 4. Width: 1m, 2m 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, four rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
Fiberglass mesh is made of quality filamentary plastic coating glass fiber yarn by special weaving technique. Fiberglass mesh has plain and neat appearance, good season-fitting, steady and soft color. Fiberglass mesh is the first choice for home, hotel and offices to prevent sunshine.
Fibreglass sheet moulding
Smc &dmc Manufcatuere of polyester sheet & dough moulding compound ant their moulded industrial products mainly electrical components as per astm , bis As per customer requirement
Fiberglass mesh Features: 1) applications: A) widely used for strengthening architectural structures and walls with good performance as reinforcing steel bar B) used in spreading layer, daubing and mechanical molding grc C) also used heat preservation work outside wall in local constructing D) can be put up as shield in agriculture to resist pest 2) we can supply styles of products according to users' needs Each roll should be wound onto a paper tube and then Wrapped up with plastic film, which should be packed in a cardboard Box, the rolls are to be horizontally placed. Rolls can be loaded into a container directly or pallets.
Woven roving Main specification: Type of glass: e-glass and c-glass . Area weight: 200g/m2-1200g/m2 Width: 150mm-1500mm
Sprays up roving Sprays up roving Sprays up roving are especially designed excellent performance for spray-up molding of fiberglass reinforced thermoset. Easy chopping. Uniform/flat lay down on the mold. Good wetting. Easy roll-out and air release. Low static. Excellent mechanical properties.
SMC Roving Description : Assembled roving for smc this product is a high performance roving designed for structural smc. Where the roving is chopped and mined with the resin to which thickening agent, filling agent and initiating agent have been added. It is treated with a high performance silane-based size and have good compatibility with polyester resin.
Chopped strand Fiberglass chopped strand Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin. Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries. Also it is easy to control the cost and is the most ideal choice of the current constructional fibers.
Fiberglass mat In 200, 250, 300 and 450 grams per meter square frp mat 30 or 36 kgs per roll
Fiberglass wallcovering Fibreglass wallcovering, made of natural materials such as silica, soda, lime and dolomite, is non-toxic and non-smelly. It is woven through special processes from fibers that are produced under temperature up to 1200íµ. With unique safe and environment-friendly properties, njefg brand fibreglass wallcovering is a new type of green building material with environmental protection effects. Specification: Weight: 45-200 g/m2 Roll width: 1 m Roll length: 25/50 m Supplied in rolls wrapped with plastic film and contained in cartons.
Fiberglass mesh Fiberglass mesh is made of c-glass or e-glass fiber, then coated by acrylic acid copolymer liquid, possesses the properties of good alkaline-resistance, high strength, good cohesion, excellent in coating etc. It is widely used in wall reinforcement, out-side wall heat insulation, roofing waterproof. It is also used on reinforcement of cement, plastic, bitumen, plaster, marble, mosaic etc. It is an ideal engineering material in construction. Specification Mesh: 2.5mmx2.5mm --- 10mmx10mm Weight: 45g/m2 c 260g/m2 Color: white, green, orange, blue and so on. Roll length: 50m/roll, 100m/roll Other specification is available upon request. Weight: 45g/m2 c 260g/m2 Supplied in rolls wrapped with plastic film and contained in cartons.
Fiberglass insect screen: Vinyl-coated fiberglass yarn insect screen is made of fiberglass under the process unifilar plastic-coating, plain weaving, and high temperature-fixing. Specifications: Diameter:0.011 inch Standard (mesh/inch ): 18x16, 18x14, 14x14, 20x20, 18x18, 16x16; Standard color: white, black, grey, coffee etc. Standard width(inch): 24", 30", 34", 36", 42", 48", 60", 72", 84", 96", 108"; Special size are available according to requirements of customers.
E-glass chopped strand mat We are the manufacturer and exporter specialized in e-glass chopped strand mat in china, the capacity is about 6500mt per year, the normally specifications are 300g/m2, 450g/m2, 600g/m2 and the width is 1000mm, 1040mm, 1250mm, 1270mm, 2540mm ect, powder or emulsion bind! quality products, competitive price and fast shipping, we sincerely wish we can have the chance to cooperate in near futurer. 30kg/roll, 300gsm, 1040mm*76ooomm
Fiberglass window screen Vinyl coated fiberglass yarn insect screen (also written as fiberglass screen or fiberglass screening) is made of fiberglass under the process of plastic coating, plain weaving and high temperature-fixing. Fiberglass insect screen is well ventilate, well transparent, easy washing, anticorrosive, resistance to burn, strong-tensile force, not out of shape, long service life and feel straight. The popular colors of grey and black make vision more comfortable and natural. Fiberglass screening has graceful and generous appearance, used for all sorts of airy in salvation and preventing insect and mosquito. Fiberglass mesh is widely used in construction, orchard, ranch, etc. Our fiberglass screening products are sold well to america, russia, turkey, etc. In cartons 10rolls to a carton, or 4-6rolls to a carton
Fiberglass mosquito screeing Fiberglass insect screen is well ventilate, well transparent, easy washing, anticorrosive, resistance to burn, strong-tensile force, not out of shape, long service life and feel straight. The popular colors of grey and black make vision more comfortable and natural. Fiberglass screening has graceful and generous appearance, used for all sorts of airy in salvation and preventing insect and mosquito. Fiberglass mesh is widely used in construction, orchard, ranch, etc. Our fiberglass screening products are sold well to america, russia, turkey, etc. Specifications: Standard mesh/inch: 20x20, 18x18, 16x16, 18x16, 18x14 Standard color: white, black, grey and other colors at request. Standard width: 24", 30", 34", 36", 42", 48", 60", 72", 84", 96", 108".Custom orders with different width, colors or length available to meet customersí» specific requirements. Weight: 115g/m2, 120g/m2, 130g/m2, 150g/m2, 180g/m2. In cartons
