Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate
Model : K9291, K9292, K9293, K9296, K9297
Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.
Chopped Strand Mat
Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers.
Product Features
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no spring-back at sharp corners.
4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
General Data
Binding type : Powder or Emulsion;
Densily : 85-900g/m2;
Width : Max.3300mm, Tapes available.
Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.
Packaging
Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.
Stroge
Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.
Product Characteristics
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
The range of the pillar height:3-50 mm, the range of the width:3000 mm.
The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
Total weight: 590 g/m2
Thickness: 0.4 mm
Color: Grey
Fire resistance: Yes
Working temperature: -50 to +260
Coating: Silicone Coated On Both Sides.
Standard widths: 1000mm, 1270mm, 1550mm,3200mm(MAX)
Price: FOB Shanghai, $3.16/sqm
Typical Applications:
Welding & Burning Safety Blankets & Curtains
Furnace High Temperature Insulation
Flange & Valve Covers
Furnace Curtains
High Temperature Composites
Thermocouple Insulation
Fuel line insulation
Stress Relieving Insulation
50Meters 1 Roll,
1 Roll 1 Box,
20 Boxes 1 Pallets
15 Pallets 1x20 FT Container,
More than 28,900 Square Meters
1945 Fiberglass Products Suppliers
Short on time? Let Fiberglass Products sellers contact you.
Technique: Needle Mat
Dimensions: 133kg/m3
Mat Type: Stitch Bonding Chop Mat
Fiberglass Type: E-Glass
Brand Name: Jotex
Model Number: JH1000-25
Width: 1000mm
Thickness: 25mm
Density: 130--138kg/m3
Color: White
Coating: Available
MOQ: 1000Meters
Payment Terms: T/T;L/C
HS Code: 701950
Roll Length: 10 Meters
Delivery time: 10 Days
Working temperature: -50degree to +1000degree celsius
10 Meters per Roll
10 Rolls per Pallet
20 Pallet per 40HQ Conainer
200 Rolls per 40HQ Container
4800 Square Meters per 40 HQ Container
JTS01 is for compositing,such as car,sports equipment,bags and anything else.
It has a proprietary finish and a thin coating of aluminum on the surface. The aluminum coating is 99.99% pure and approximately 200 angstroms in thickness (One angstrom is one ten-billionth of a meter). This coating produces the highly reflective surface.
The original Texalium product is the silver metallic material that we use in our wallets. Now there are at least four post treatments which can be done to alter the color of the fabric to give it either a blue, yellow, black, or red appearance.
Silicone coated fiberglass fabrics from Jotex Composite Materials Co.,Ltd. offers good resistance to extreme temperatures, being able to operate normally from -500C to +2600C.
It also has excellent weatherproof, water repellent, good chemical resistance to acids and lye, good mechanical properties for make-up.
Silica fabric is a high temperature fabric that has been specifically developed to give a drapeable flexible cloth capable of offering excellent continuous high temperature protection. Jotex Composite Materials Co., Ltd. produces silica fabrics offer excellent resistance to metal splash, and due to its manufacturing process provide improved abrasion resistance against traditional silica fabrics.
Supporting continuous operating temperatures of 1800°F (980°C) with peak temperatures to 2300°F (1260°C), Jorhom provides superior protection from sparks and slag and is ideal for stress relieving, stainless steel welding, and equipment protection. The yarn is composed of more than 96% silica for superior temperature resistance. It is then treated with an inorganic coating that improves abrasion resistance and remains with the fabric even at high temperatures.
Jotex Composite Materials Co.,Ltd.' silica cloths are found in a comprehensive range of models. They are designed in keeping with individual specifications as well. Being the foremost supplier & exporter, we ensure our manufactured products exemplify the true standard.They are used in many applications like, welding/cutting protection, molten metal splash protection, heat and flame shielding and more.
The combination of laminating an aluminum glass fiber cloth heat shield to a layer of protective fiberglass insulation protects personnel or equipments by reflecting radiant heat.It is always used for fireproof,welding blanket,fire cloth;sleeves and hoods.
0.4mm E- Glass Fiber Red Silicon Coated for Engineered Thermal Insulation is one of Jotex Composite Materials Co.,Ltd.'s hot sale materials.Its width from 1000mm to 3200mm. And the thickness can be from 40g per side to 80 g per side. Of course,Double coating is available.
It is used in boat building and repair, water sporting applications, aerospace industries, wind power industries,building construction, automotive applications.
Remark:Woven rovings are available in the width range of 10-3000mm and the weight range of 200-800g/m2
Smokeless fiberglass needled mat, ordorless fiberglass needled mat
Material
E-glass
Thickness mm
3mm-10mm
Density
111-50kg/m³
Thermal conductivity
0.032 0.039W/m 25
Max temp.
700
Long term temp.
550
Features
Eco-friendly, smokeless, ordorless
The product (smokeless fiberglass needled mat, odorless fiberglass needled mat) is made from fiberglass as the material.
How is a smokelss fiberglass needled mat manufactured? And what is its feature?
It undergoes a heating process in different stages to carbonize trace organic substances within the fiberglass wool. During the carbonization process, there may be a slight odor and smoke generated. After the baking process, the surface of the product can exhibit either a white or yellowish color, depending on the baking temperature.
Compared to fiberglass wool that hasn't undergone baking, the baked fiberglass wool retains its original properties while eliminating the generation of smoke and odor when subjected to reheating between 200-500C.
Why does an oven(home appliance) need ther thermal insulation(smokeless fiberglass needled mat, odorless fiberglass needled mat)?
This odorless fiberglass needled mat is usually used as thermal insulation( liner or pad) for home appliances such as environmentally sensitive grills, ovens, disinfection cabinet, microwaves and other appliances, which are subject to strict environmental regulations. If a domestic appliance (eg. oven) is added with this thermal insulation , it will be more energy efficient to prevent heat escaping from the oven and it will reach temperature faster and reduce cooking time.
The smokeless fiberglass needled mat is available in rolls or die cut pieces based on requests.
The smokeless mat can be laminated with fiberglass fabric, foil facing, aluglass cloth facing,or coated with self adhesive based on your request.
Small sample pieces are free and freight to collect.
1945 Fiberglass Products Suppliers
Short on time? Let Fiberglass Products sellers contact you.
