Woodwork, Wooden Art, Walnut Art, Walnut Gun Stock Blanks.
Wood, medical products.
White wood and beech wood timber, sunflower and olive oil, pasta, wheat flour.Transportation and shipping
Timber Products. Construction Timber, Pallet Blanks, Wooden Materials For Interiors , Thermal Wood And Firewood.
Wood chips, pulp grade, wood logs, timber and lumber, biomass fuels, oils, aviation fuels, oil fuels.
Urea, sugar, grains, wood, granites.Logistics
Flour, berries, fruits, vegetables, wood, honey, sunflower oil, cereals and the final product.
Sugar, Frozen Chicken, Wood and Pellet..Trade.
GHANA origin Teak Square Logs available Average 1.00 CFT and up Stuffing 21m3 plus
Oil products including petcoke, graphite, lithium, iron, copper, coal, coltan, titanium, eucalyptus wood logs, and wood chips, pine wood logs and wood chips, teak wood logs, gmelina wood logs, saman wood logs, sugar.Sourcing
Quartz rock, black quartz block and slabs, kaolin clay, lumps, charcoal, wood pulp.
Glulam Beams Laminated Beams.
Beech veneer log: Features: -50 cm and up diameter x 2.7 - 2.8 - 2.9 and 3.0 meters and combinations of these lengths. -Red heart max. -25%, Fresh cut -4 sides clear and straight.
Size 1830*2440*9-11-15-18-22 mm 1220*2440*9-11-15-18-22 mm 610*2440*9-11-15-18-22 mm. Osb2 osb3 50 piece/pallet.
Technical specifications Overall dimensions mounted: lg 8.1 mx 2, 7 mxh 2m Built entirely of galvanized steel chroming. Vertical stroke 1170 mm Longitudinal slide stroke 7000 mm Cross slide stroke 1300 mm Total weight 650 kg (depending on engine) All movements are ball bearing. The blade shaft is mounted on two conical roller bearings. Trolley wheels are easily replaceable steel 380 v three-phase electric motor Petrol engine briggs & stratton Safety blade front and rear Simultaneous vertical displacement of the assembly by a single crank Accident all items can be replaced or repaired, beams, frames, truck, etc .... Sawing capacity Logs: maximum diameter of 1.4 m to 2 m and 6 m length maximum Timber: 25 cm x 25 cm (26 cm x 26 cm optional) Quarter sawn: 24 or 26 cm wide Volume of daily flow: from 6 to 12 cubic meters of wood sciépendant as sawing continues on the other station. It allows to increase the daily capacity by eliminating the time-sawing between two logs.) A portable sawmill ecopro2® includes: A sawmill with capacity 25 cm x 25 cm x 6 m A tilting system (this equipment allows to remove the waste and to position a new log without risk of collision logs / lumber mill in the open position while sawing continues on the other station. It increases daily capacity eliminating the time-sawing between two logs.) A sharpener (sharpener helps sharpen the saw teeth without removing the blade.) (+ link to the video) A toolbox A blade diameter 630 mm
Technical Data K5-320 K5-400 Planer Max. Planer Width mm 320 400 Work Table Length mm 1560 1920 Max. Planing Thickness mm 4 4 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Cutter Shaft Dia. mm 86 86 El. Motor Power kW 2.2 3 Thicknesser Max. Planer Width mm 320 400 Work Table Length mm 550 690 Max. Planing Thickness mm 180 220 Max. Planing Heigh mm 3 3 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Feeds m/min 8 8 El. Motor Power kW 2.2 3 Boring Device Table Dimensions mm 400/250 (500) 400/250 (500) Longitudinal Travel mm 100 (150) 100 (150) Cross Travel mm 100 (150) 100 (150) Vertical Travel mm 100 (150) 100 (150) Max. Drill Dia. mm 16 16 Drill Speed R/min 5200 5200 Spindel Moulder Spindle Diameter mm 30 (50) 30 (50) Spindle Speed R/min. 6000 6000 Vertical Stroke of Spindle mm 130 130 Max.Ttool Diameter mm 170 170 Dimensions Of Worktable mm 850 / 450 850 / 450 El. Motor Power kW 2.2 2.2 Circular Saw Saw Blade Diameter mm 300 300 Saw Blade Speed R/min. 3700 3700 Max. Depth Of Cut mm 85 85 Dimensions Of Worktable mm 850 / 450 850 / 450 Spindle Dia. mm 30 30 El. Motor Power kW 2.2 2.2 or 3 Tenoning carriage Dimensions of worktable mm 450/750 450/750 Machine dimensions Net weight of the machine Kg 540 580 Length mm 1600 2000 Width mm 1140 1700 Height mm 1000 1100
Circular saws Cutters Cutter heads Shank cutters And many others by customer’s request.
Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401 Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600 “T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18 Table swivel – left and right (º) 45 45 45 45 45 Longitudinal table travel - manual mm 820 950 1000 (1250)* 1150 (1250)* 1250 - automatic mm 800 930 980 (1230)* 1130 (1230)* 1230 Cross table travel - manual mm 280 320 360 360 360 - automatic mm 260 300 340 340 340 Vertical table travel - manual mm 410 410 460 460 460 - automatic mm 390 390 440 440 440 Max. Distance from table top to spindle axis mm 440 440 490 490 490 Spindle nose taper ISO 40 40 50 50 50 Number of spindle speeds 18 18 18 18 18 Spindle speed range rpm 40-2000 (50-2500)* 40-2000 (50-2500)* 32-1600 (40-2000)* 32-1600 (40-2000)* 32-1600 (40-2000)* Number of table feeds 18 18 18 18 18 Table feed rate - x,y mm/min 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** - z mm/min 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040 Main motor power kW 4 5.5 7.5 7.5 7.5 Feed motor power kW 1.5 1.5 2.2 2.2 2.2 Machine weight kg 1975 2025 2850 2900 2925 * - option Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds
Planer Plate dimensions400 x 2300 mm Front plate length 1110 mm Rear license plate size 1110 mm Max. Planing length 18 mm Trench slope angle0-45 Blade qty 4 Top spindle speed 4000 rev / min Top shaft diameter 105 mm Saw tray Plate dimensions 550 x 800 mm Circular saw blade diameter 350-400 mm Shaft diameter 30 mm Tray spindle speed 3600 Drill Plate dimensions 270 x 480 mm Longitudinal motion 170 mm Transversely action 135 mm Vertical movement 160 mm Drill diameter 20 mm Machine Motor force 4 hp Dead weight 850 kg.
e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips. The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors More information on requests, for spam protection please introduce yourself properly. Technical data: Model: RDY 80-300 Manufacturing year: 1995 Capacity (throughput): 220 m3/h loose wood chips Press roll diameter: 915 mm Roll length: 2440 mm Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz Press distance between the rolls: 2.2 mm Gearboxes: 2 x Kipo Benzler TV 512 Hydraulic pump: Rexroth 200 bar with Mecman syliders Electric motor for hydraulic pump: ASEA 7.5 kW Weight: 33 000 kg Length: 5083 mm Width: 2550 mm Height: 2400 mm.
