Butyl rubber, also known as isobutylene-isoprene rubber (IIR), is a synthetic rubber characterized by its unique properties. Here are five short descriptions for butyl rubber:
Nitrile butadiene rubber, also known as nitrile rubber , NBR, Buna-N, and acrylonitrile butadiene rubber, is a synthetic rubber
derived from acrylonitrile (ACN) and butadiene.
Product Paramenters
Item Units Appearance
Type QD-701
Appearance Milk white
Solid content % 43.5-46%
PH value Min 8.0
Viscidity mPa.s Max 40
Coagulum % Max 0.1
Mechanical stability % Max 0.1
Scope of application:
Creating artificial obstacles on the roads to reduce vehicle speed
Advantages of our speed bump:
Firmly attached to the surface with reinforced anchors;
Yellow inserts improve visibility obstacles for 100 meters in the dark;
Tactile surface for better traction and traffic safety.
Main/side section
Composition: 90% - rubber, 10% - metal cord.
603 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
Designed to create a secure parking space at petrol stations or other parking facilities;
The flexible sectional design gives the chance to form a bumper of any length;
Visibility is ensured by reflective elements in the dark;
Secure fastening to anchors, and connection of details thanks to reliable locks.
Scope of application:
Assist the visually impaired in public places on the street and in buildings (squares, sidewalks,public buildings, shopping malls and sports facilities).
Advantages of our tactile tile:
Expressive tactile effect and non-slip surface of tactile tiles (compared to analogues of polyurethane, which is slippery when wet);
Universality of application (indoors and outdoors);
Modularity of a tile and creation of various configurations of a covering.
Fast and reliable cooperation without intermediaries!
The product is durable and resistant to high and low temperatures, ultraviolet rays and corrosion!
RUBBER PARTS
We need only technical documentation, to make the part.
We have excellent quality, and competitive prices.
We have flexible working conditions
For more information just write to us.
EKASWELL SB850, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity.
Application areas:
Indoor and outdoor places.
Pools, water tanks, treatment plants.
In basic-curtain combinations.
Pipe inlet and outlet.
Construction joints in cable ducts.
In tunnel segments.
In the joints of old and new concrete.
Used in construction joints.
Advantages:
Easy application.
Flexible.
Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete.
It is resistant to high salt concentration and various chemicals,
There is no disintegration and.
The cycle capacity is high.
Technical Features:
Ekaswell SB850: Calculated at 23 C. Expansion rate: %850. Elongation at break: %490/770. Tensile strength: 1.2/2.2 Mpa. Color: Beige, Blue, Red, Yellow, Green (can be produced in all colors). Density: 1,25 g/cm3. Hardness: 40. Application temperatures: -30C / 70C.
Thermoplastic elastomer based EKAFLEX is a permanently elastic dilatation band used in joints of all types of construction and expansion joints.
Application Areas:
In underground applications - underneath the plants.
In waterproofing of horizontal / vertical dilatations.
In the insulation of wide and irregular cracks. In elastic waterproofing of base-parapet connections.
In the joints of different building materials such as steel construction and reinforced concrete.
In the swimming pool and wastewater units.
It is used in tunnel and similar underground structures.
Advantages:
UV resistant.
High resistant to plant roots.
Resistant to bacterial attacks and chemical degradation.
High resistant to environmental influences and aggressive environments.
Easily processable.
High elasticity.
Method of Application:
Surfaces must be clean, free from carriers and loose particles.
EKAFIX Application:
EKAFIX (Epoxy adhesive) has two components. Component A (3.75 kg)
and Component B (1.25 kg) are mixed in a low-speed mixer until
homogenous before mixing.
With trowel and spatula, EKAFIX (Epoxy Adhesive) is applied to the
dilatation sidewalls with a thickness of approximately 1.0 - 1.5 mm. The
application width should be at least 40 mm for the 20 cm tape, and at
least 50 mm for the tape 30 cm. To ensure strong adherence, the
adhesive must be thoroughly applied.
EKAFLEX Application:
The areas to be applied should be identified and the appropriate tape
lengths should be prepared. The tapes to be added are prepared by
boiling them with hot air gun before application.
The EKAFLEX Band is laid on the adhesive layer and with the help of a
suitable roll, full contact is established between the tape and the
adhesive layer. In the same way, EKAFIX Epoxy Adhesive is applied to
the top surface of the band.
The application is done with a thickness of 1.0 - 1.5 mm and a band of
at least 20 mm, the layer is allowed to harden.
EKAFIX Epoxy Adhesive tape should not be moved, lifted and must be
protected against water and/or mechanically stressed until it is fully
hardened.
It is important to consider that, in cold weather the drying time of the
adhesive is longer than it is in hot weather.
Special stock of high quality rubber conveyor belts with heatresistant and abrasive resistant cover,
Especially useable in cement industry, fertilizer,
Stone crashers etc.
Made in Germany
Delivery from ready stock, subject to being unsold
Extremely elastic, ductile and compressible
Good corrosion behaviour and high absorbency
Heat resistance up to 80° c
Low temperature resistance up to -40°c
Resistant to uv-ozone and lubricants
Elongation at break: 350 -600 %, depending on sponge type
Tensile strength: 10 - 60 n/cm², depending on sponge type
Environment friendly.
Styrene-butadiene rubber (SBR) Its vulcanized trimmings from production scrap from rubber we have ongoing this type of scrap.
Product Description:
trimmings from production scrap from rubber
we have ongoing this type of scrap
any question do not hesitate to contact us
Styrene-butadiene rubber (SBR) is one of the most versatile copolymer rubber compounds. It consists of the organic compound styrene and the chemical budatiene, with the amount of budatiene usually being about three times more than the amount of styrene. SBR is a stable synthetic that is resistant to abrasion. It is used in a wide variety of products, such as automobile tires, children’s toys, and shoe soles
Its vulcanized
Additional Information:
Packaging : Bales
Color : Mix Color
Contamination : Production Scrap Very Clean
Weight per container : 25 +
Payment Conditions 2 : 30% advanced payment rest direct after draft BL
Availability : ongoing
Availability /Month : ongoing
603 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
