Ultra- Fine Nickel Wire 10Kg and more Round, diameter 0,025mm (+/- 0,002mm) Security Warehouse in Europe
Aluminium Ingots A5N and A6N 99,9999% 650Kg
We are selling titanium sponge, located in Rotterdam. We have 90 tons at the moment Ti: 98% min O: 0.10% max, N: 0.10% max C: 0.10% max CI: 0.15% max Si: 0.04% max F: 1.9% max Mg: 0.001% max Ni: 0.010% max Size: 5-30mm
Alfa Ferro Alloys is international trader of ferroalloys. Offering Anthimony ingots Grade 2 99.65% min. Available for October 2021 shipment.
We are producing steel pipe and profiles. Mostly our C type profile used for solar energy systems. We are also providing some solar energy related products in Turkey. Our production capacity is 45 MT per day. We can provide competitive prices. You can find our products as an attachment. I will be appraciated from your cooperation.
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
Steel square can be made of steel of various grades: carbon - St3, St20, St35; St45 low alloyed - Steel 40X, Steel 40XH; high-alloyed - 08 18 10; 40XH2MA; 38XH3MA; 14 17�?2 and others high-speed - U7; U7A; U8A
Thermally strengthened periodically profiled steel rods of the diameter 6-40mm - the so called thermic is used for the construction of strategic reinforced concrete structures, GOST 10884-81. According to the standard this rebar is made out of these types of steel: AtIII - St (sp, ps); AtIV, AtIVK - 20GS, 25G2S, 35GS, 28S, 10GS2, 08G2S, 25S2P; AtV(K and SK) - 20GS, 20GS2, 08G2S, 10GS2, 28S, 25G2S, 35GS, 25S2R, 20HGS2; AtVII - 30HS2.
A Grade Electrolytic Copper Cathode
Aluminium Ingots
Convective coil
Radiant Coil
FOR SALE Copper cathode Quality: Copper cathode STOCK 30.000mt 12 months contract is made Monthly Supply: 1000-100.000 thousand tons Origin: Russia Payment: DLC Place of Delivery: CIF Price:LME-22% Annex: Analysis report,
Quality: Aluminum a7 ingots STOCK 50.000mt 12 months contract is made Monthly Supply: 1000-50.000 thousand tons Origin: Russia Payment:LC-DLC Price: 1900$ Annex: Analysis report, LOI-POF
Aluminum A7 From Russian Federadion, the volume - 20/30 thousand tons LME-160 $. The volume can be taken at once and in the batches. Primary aluminium with impurities no greater than the chemical composition of one of the registered designations.
Offer of copper cathode 99,999 % for export Ingots, weight 1 kg, vacuum packed in boxes of 25 kg Copper (metallic) high purity Isotope Cu63 / Cu65 Price at 164 euros customs Payment when loading in Russia, Voronezh Other forms of payment can be discussed
