European Metal Metal Products Suppliers and Manufacturers

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Metal Derivative Products

Copper wire scrap Wire diameter 020mm 025mm 030mm Weight 3kg 5kg 7kg 15kg 20kg Purity999 min Name Copper wire scrap Millberry 9978 Item Standard Results Purity 9978 999 Carbon 003 003 Coblet 0001 00009 Iron 0005 0005 Phosphorus 001 0009 Sulphur 001 0009 Zinc 0003 0003 Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999 Cu 999 Element0005 Copper9999 Min Lead0005 Max Bismuth05 Max Total impurities03 Max Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94 Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch Shall consist of clean untinned uncoated unalloyed copper wire and cable not smaller than No 16 B S wire gauge free of burnt wire which is brittle

Thickness as your request 2mm,3mm,4mm,5mm,6mm Size We can build 2M3, 3M3, 4M3, 5M3 6M3 ,8M3, 9M3, 10M3, 12M3 Skip bin and customized bin is available Painting we provide priming painting color,and the final color according to customers' demand, enhancing your company image with great looking bins. Options 1.Prefabricated with top coat finished 2.Prefabricated and hot dipped galvanized 3.Flat packed with premier only 4.Fork slot under floor or inside bins 5.Other requirements like thickness, different steel grade used

Products Used Radiator scarp Copper Content 99.9% Material Copper/Aluminum Dimensions 914mm x 914mm x 12mm Core dimension 360x688x32mm Inlet 35mm Outlet 35mm Grade AA - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min - Cu -: 58% - 60% - Pb -: 1.5% - 2.5% - Imp -: 0.3% (Max.)

Our exclusive manufacturer client is producing powder metals for various industrial applications most notably 3D printers and augmented manufacturing. The exceptional product portfolio is tested and approved by leading corporate buyers in Turkey and now we are going global. Our partner excells the highest standards during production and achieves the best quality at water atomization and VIGA (Vacuum Induction Gas Atomization) techniques both. Some of the final products for your requirements are as follows: Copper (Cu), bronze (85/15, 90/10), stainless powders (304, 316L), tin (Sn), aluminum (Al), zinc (Zn), Al12Si / AlSi10Mg. Contact us for more details.

Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery

Size : 5,5 mm-25 mm production range Weight min. 2050 max 2400 kg Outside diameter 1250 mm Internal diameter 850 mm Height 1700-2200 mm

Classification: MANGANESE Commodity: Manganesium 42% - Bulk Quality/Purity: 42% Price Conditions: FOB Price: Negotiable Origin: BRAZIL, Port of BARCARENA. Duration of Contract: Annual contract, renewable for the same term. Minimum amount: 30.000 MT x Month Total / Contract Quantity: Annual sales contract with initial delivery of 30,000 until reaching 50,000 Metric Tons per month. We have an important Mineral Reserve, we are able to meet the delivery and shipment goals that are scheduled. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Payment method: Direct bank transfer to the Seller's accounts of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery Documents: All product certificates, batch numbers, Fresh SGS, delivery schedule

Commodity: Lithium L20 Origin: Brazil Port of Shipment: Bahia Port Monthly Quantity: 50,000 MT per month Packing: Bulk Duration of Contract: 12 months minimum Delivery Time: 30 days Unit Price: FOB 2.150 Euros Lithium content between 3% to 5%. FOB 2.580 Euros contenido de Litio entre 5% a 7% Insurance: 110% Performance bond: 2% Payment method: Letter SBLC is unconditional, assignable, divisible, transferable and irrevocable.

SI 0.28 p 0.004% V.m 10 .15 ash 4.0% fe 0.25% resistivity 65 .90 Density 1.46g&cm compression strength 18mpa real density 1.98gcm

item value Place of Origin UK Model Number lead ingot Dimensions 25kg Chemical Composition Sb Sn Zn Fe Cd Pb (Min) 99.99% Alloy Or Not Non-Alloy Secondary Or Not Non-secondary Product name Lead Ingot Pb99.99 Grade and Specification ASTM B749-03 Lead content 99.99% 99.98% 99.9% 99.5% 99.8% Keyword 99.994% High Purity Lead Ingot Color Silver White Packing Customer's Requirements Purity 99.97%Min

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle

Model Number: 314 321 441 430 Type: plate Application: decoration Certification: ISO Tolerance: 1% Processing Service: Bending, Welding, Decoiling, Punching, Cutting Product name: aisi 314 321 441 430 stainless steel sheet Surface: 2B, NO.4 HL available Technique: Cold Rolled Finish Material: Stainless Steel Color: Natural Color Edge: mill Edge/ slit edge Item:ISO9001 Standard Packing: Standard Export Packing Ni:min1%