GG20,GG25,GG30
Ferrous metals â?? iron and its alloys (steels, ferroalloys, cast irons), account for more than 90% of the total volume used in the economy of metals, of which the main part is made up of various steels, steel tubes, steel coils, rebar, rubber. Ferrous metals are used to make railway rails, pipes for transporting oil and gas, metal scaffolding, anchors for swimming facilities, nails, needles, springs, and much more.
Pig feed refers to the nutritional mixture of ingredients specifically formulated to provide essential nutrients to pigs raised for various purposes, such as meat production (pork) or in some cases, as pets or for agricultural work
IRON ORE IN BIG VOLUMES, NIGERIA: 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838 Metric Tonnes - Iron Content: 60.8%� -� S.G:� 5.0
Item Data Item Data proportion 4.8g/cm3 Fe2+ 23.85% bulk 2.5g/cm3 Fe3+ 40-42% Breaking rate 0.05% Fe3O4 4.45% Wear rate 0.04% Al 0.17% Hardness 7 S 0.26% porosity 47% Ferrous iron 20-40% Nonuniformity coefficient K80 1.8
Available iron scrap 5000tons price fob payment L/C in case of interest pls send your LOI to our e-mail for further proceedings.
Mining owner and exporting company is ready to supply iron ore 62% - 68% FOB or CFR terms
We are selling titanium sponge, located in Rotterdam. We have 90 tons at the moment Ti: 98% min O: 0.10% max, N: 0.10% max C: 0.10% max CI: 0.15% max Si: 0.04% max F: 1.9% max Mg: 0.001% max Ni: 0.010% max Size: 5-30mm
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.
The material of manufacture and the range of the round bar in accordance with GOST 2590-2006, where the bar can be made of steel of the following grades: carbon (St3, St20, St35, St45); low alloyed (Steel 40X, Steel 40XH); high-alloyed (08 18 10, 38XH3MA, 40 2 14 17 2 and others), high-speed (U7; U7A; U8A)
Steel square can be made of steel of various grades: carbon - St3, St20, St35; St45 low alloyed - Steel 40X, Steel 40XH; high-alloyed - 08 18 10; 40XH2MA; 38XH3MA; 14 17�?2 and others high-speed - U7; U7A; U8A
Thermally strengthened periodically profiled steel rods of the diameter 6-40mm - the so called thermic is used for the construction of strategic reinforced concrete structures, GOST 10884-81. According to the standard this rebar is made out of these types of steel: AtIII - St (sp, ps); AtIV, AtIVK - 20GS, 25G2S, 35GS, 28S, 10GS2, 08G2S, 25S2P; AtV(K and SK) - 20GS, 20GS2, 08G2S, 10GS2, 28S, 25G2S, 35GS, 25S2R, 20HGS2; AtVII - 30HS2.
Smart Scrap is a European Trader with our processing Scrapyards. We offer Uk Plate Iron with P. Quality: Fe90+ Size: 400-1500mm Weight of Piece 500-1200kg Quantity: up to 500t per month Delivery : Container/tipper trucks
Cast Iron The scrap of the rolls contains many alloy additives such as Cr 2.5% -3.5% Ni - 0.8% - 1.5% Mo - 0.2-0.5%. V 0.2% - 0.8%. The roller consists of a cast iron core with C - 3.2% and a cast steel shell with C - 1.2%. There are always higher alloying elements in the roll shells. Scrap especially profitable for quality steel mills Cast iron alloy scrap price 270 Euro exw
Cast Iron price 140euro exw
Product: Iron Ore Type: Magnetite Content: 62% Quantity: 150,000 MT - month Contract: 36 months extensive Origin: Brazil Shipping Port: Suape - Recife Porto Destination: ASWP - China Shipping: CIF Price: PLATTS -7/8% Payment: LC or DLC (Transferable, Divisible, Irrevocable and Operative) MT700 issued by a TOP 25 bank This supplier has exporting history
1, Iron Ore for sell Specifications ; Fe Total 64,92% FeO 6,35% As
