Ltd Spetspromenergo-1, Ukraine produce and sell heaters (heaters) water of all sizes and tiering. Heating medium - hot water warmed to 200 ° C and operating pressure up to 1.2 MPa.
Ltd Spetspromenergo-1, Ukraine produce and sell heaters (heaters) Steam, of all sizes, and tiering. Heating medium - steam of 200 ° C and an operating pressure of 1.2 MPa.
we are manufacturer of custom severe/heavy duty all stainless steel ,carbon ...etc biggest heat excahngers .
Working Temperature - +200'C ~ - 200'C Max Pressure - up to 45 Bar Thickness - 0.3 mm SS316L, Cu - 99%; SS304 - optional
Heat sinks (Heat exchangers) for LED headlights in different shapes.
Ltd Spetspromenergo-1, Ukraine produce and sell Finned Tubes. Finned tube has been successfully used in heat exchangers: heat exchanger, heat recovery boilers heaters, economizers, heaters, air-cooled condensers, product coil heating furnaces, heating batteries.
Ltd Spetspromenergo-1, Ukraine produce and sell Finned Tubes. Finned tube has been successfully used in heat exchangers: heat exchanger, heat recovery boilers heaters, economizers, heaters, air-cooled condensers, product coil heating furnaces, heating batteries.
Model: 504 Width(mm): 200 Height(mm): 480 Length(min-max): 200-400 Horizontal port distance(mm): 70 Vertical port distance(mm): 381 Max. Working pressure(bar): 20 Test pressure(bar): 25 Weight(kg): 23+0.25n Connection diameter: 1 1/4” thread Width(mm): 200 Height(mm): 480 Length(min-max): 200-400
A recuperator is a device which makes additional use of the energy of exhaust gases, which would otherwise be lost through the chimney. In practice the recuperator is a heater, which is installed between the boiler and the chimney. The waste exhaust gases at a temperature of 220° C are conducted through the recuperator and keep heating the supply water of the steam boiler or feedback water of a hot-water boiler. Consequentially the exhaust gases cool off, while the supply or feedback water is additionally heated, which means approximately 5 % of additional efficiency for recuperators of type I totalling to 95 % (applies to steam boilers). Recuperators of type I are made of steel, while additionally a stainless steel recuperator of type II can be integrated, which brings approximately another 3 % of savings totalling to 98 % (applies to steam boilers).
We produce shell and tube heat exchangers from carbon or stainless steel. Heat exchangers are thermal machines where the heat from one media is transferred to another. In practice, they are used for cooling oil, for steam condensation in central heating systems and as boilers for hot tap water. The heat exchangers can be made from steel or stainless steel. The pipes inside the heat exchanger are according to the TIG welding procedure welded to the flange of the heat exchanger. The heat exchangers are produced in various types: U-shaped, helical, with even pipes, conducting several parallel currents through the heat exchanger.
GEA Varitherm VT-20 Plate Heat exchanger is made of several Varitherm-design stainless steel plates which are combined to form one effective heat transfer unit. Within each plate package the heat exchanger plates support each other at the metal-on-metal profile cross points, which ensure the stable behavior of the plate gap. The plate gasket has so called glue less sealing system. VT-20 is specially designed for cooling and heating of fluids with particle content up to a particle size of 2 mm as well as condensation of vapors, gas cooling and gas dehumidifying. This unit is in good operational condition. Manufacturer: GEA Ecoflex GmbH Type: VT 20 BC-12 Serial no: 170/12982 Year of manufacture: 2000 Frame material: Stainless Steel AISI 4571 Plate material: Stainless Steel Max. operating pressure: 16 Bars Max. operating temp. 100 C Max flow volume: 90 m3/h Width: 337 mm Length: 999 mm. Manufacturer: GEA Ecoflex GmbH Type: VT 20 BC-12 Serial no: 170/12982 Year of manufacture: 2000 Frame material: Stainless Steel AISI 4571 Plate material: Stainless Steel Max. operating pressure: 16 Bars Max. operating temp. 100 C Max flow volume: 90 m3/h Width (plates) 337 mm Length (plates): 1370 mm.
Plate Heat Exchangers as well as plates and gaskets separately. Our models are similar to those of Sondex and Funke companies. ARES offers PHE models: A1S, A1L, A2S, A2L, A3S, A4A, A6S, A6M, A8S, A8L, A12S
These hydraulic parts are used in automotive and energy industry. We make mass production such as 60k-80k a month. Depends on the order quantity
Custom Made Heat Exchanger : Our supplier has produced many of heat exchangers in many stainless and metal material derivatives that require special design and manufacturing for our customers. The heat exchangers they produce work safely in many areas such as automotive, cement, ceramics, steam systems in the sector. All products are manufactured using world class welding skills based on universal technical and environmental principles. There are no manufacturing-related restrictions on the size of the heat exchanger required by our customers. Products that are not suitable for transport in one piece are designed to be part-assembled Welding Quality : Our supplier performs WPS and PQR welding procedures with trained and competent personnel. They perform welding x-ray examination under all conditions, including the possibility of welding in welding types such as robotic, argon, gas metal, electrode, and post-welding heat treatment, and pressure vessel class products under welding standards. Why Custom Manufacturing? : The need for different heat exchanger design and production parameters for different industrial areas is a natural process. The solution for non-fabricated heat transfer products is designing and producing according to needs
