High Qualtiy Granulate
It is two-component, elastomeric system, 100% solvent free and 100% solid material. The product is aromatic and very resistant against weathering aging (excluding optical discoloration that occurs by time). Applied product gives seamless monolith surface. High UV resistance. It does not flat joints and grouts as it takes the shape of the surface.Product Advantages It includes all features of water-proofing, anti-rust and last coat of paint It is applied very fast (one labor / 1 hour / 250 m²) It is used as a thin layer (2-3 mm) Curing time is 40 seconds Surface is seamless and compact It is very resistant to abrasion Excellent chemical resistance to the wide range of common chemicals Coating of any thickness is done in one shot - no need for stratified application It can be applied on all construction materials. Application temperature range is very wide (0-80 ° C)and even It can be applied when air humidity is 100% Necessary condition is that the dew point is above surround temperature It has an excellent thermal shock resistance (-40°C - +200 °C) Surface can be put in exploitation 24 hours after application. It is long-lasting (approximately 25 - 50 years).
#1 chemical debonder for ca super glues and other adhesives, grease oil, paint drops, etc. 12 pieces in a carton.
Ca based super glue with accelarator spray for bonding in 12 secs for all adhering applications. 25 sets in carton 50 gram ca glue + 200 ml accelarator aerosol in a set.
Drum melters models dm 200 and dm 20 to process any kind of hot melts – even pur and uv curable – further to a wide range of butyls, glues and polymers with working temperatures up to 240°c in 200 lt- (or 55 gallons) and 20 lt- (or 5 gallons) tanks. Equipped with high precision gear pumps, the system ensures top precision in all conditions of use, both for continuous and intermittent applications. The special design and high-tech materials enable an excellent anti-sticky control and avoid any adhesive deterioration, particularly while using pur adhesives.
The wide range of continuous output melting units model mitsu enables to process any kind of hot melt adhesives in blocks or chips with working temperatures up to 240°c, including reactive pur and uv-curable ones. The melting rate varies from 2.5 to 160 kg/h, according to different models, giving an appropriate answer to all high, medium and low melting requirements. This modular system enables to conform to different production needs thanks to partial use function and possibility to integrate later on the melting capacity.
Automatic adhesive application guns for spray/spiro and glue lines/dots applications. The system processes any kind of hot melt adhesive and is available in single or multiple units with working width from 10 up to 6.000 mm. They enable both continuous and intermittent adhesive applications.
Unique range of single sided self-adhesive tapes for splicing surface treated release/casting papers as used in the manufacture of synthetic leather. The system consists of: For pu and pvc casting papers use: Top splice The tapes available for the top splice have a special release coat on the tape surface which ensures easy removal of the synthetic leather from the splice. Back splice A choice of 3 paper based tapes with very specific properties and easy to apply. Recommended for both pu and pvc release papers. Dimensions and case quantities: Availability 88-06 50mmx66m (36 rolls per case) 75mmx66m (24 rolls per case) In stock 8-01 72mmx66m (16 rolls per case) In stock 80-50 75mmx33m (l2 rolls per case) In stock 80-55 75mmx66m (l8 rolls per case) In stock 80-60 75mmx33m (l2 rolls per case)
Slipping : 0,5 mm Density : 1450 ± 100 kg/m³ Open time : 30 min Application. Temperature : +5 Cº / +35Cº Bonding Strenght : 0,50 N/m² Grouting Appl. Time : 48 hours later. 25 kg kraft stack paper.
Italian Company sells 1K PU-Acrylate glossy/semi-glossy/matt/super matt lacquer, odorless with very low VOC content. It has a high solid content which provide the wood a warm light tone. Suggested for treatment of wooden floors in homes and other areas subject to normal wear. Fully compliant with VOC 2010 legislation.
Italian company sells 2k water-based pu glossy/semi-glossy/matt/super matt lacquer, odorless with very low voc content. It has a high solid content and provides the wood a warm light tone. Suggested for treatment of wooden floors in commercial premises or wherever a high resistance to wear is required. Total resistance to the ôblack heel markö.
Italian company sells two-component polyurethane varnish (1:1). Glossy, elastic, hard-wearing and scratch-resistant. Particularly recommended for varnishing traditional parquet of all wood types. Resistant to washing with water and neutral detergents. Duro lack mc 50 gives an even finish.
Italian company sells single-component oil-based urethane glossy/semi-glossy/matt/super matt/coloured finish for varnishing wooden floors. Excellent surface finish with waxed/oiled effect. Ideal for flamed woods.
100 % solid printed , printed, polished, in adhering of paper and cartons , and in covering carton and carton box , besides pvc, pet .Ps and in labeling of processed pp and pe bottles in this field available 100% water based productions group without Synthetic solvent. 15/30 kg. Pe bidon.
% 54 + 2 solid, adhering and in lamination of every kind of paper and carton expect uv lak . In lamination of soft pvc to paper and carton .Used in packing of blister pac as termoactive adhesive besides used ear glue and side of carton box. Also used in automatic machine as adhesive labels on pvc bottles . 30/60/125 kg. Pe bidon.
Adhering of all types of wallpaper, Pvc folio, sealed jute and weaving glass, cover of textile wall paper. Glue is ready to use not effected damp and when dried making transperent elastic film. 10/15 kg.Pe bucket.
25% solid, having the particularity without stuffing, safe and elastic film, classified polyvinyl asetat hopolimer emulsion . 30 kgs in pe drums.
Acrylic adhesive 2-cartridge adhesives for acrylic, solid surface, artificial marble, composit stone 50 ml, 450 ml 2-componenet cartridge and bulk
Takter2000 Very good adhesive for embrodery and textile cut piece printing no smell 12 pcs in kartons
Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement. One component formulation Good non-sag properties Short cut-off string Cold application Fast curing â?? Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted
