Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats. Size 5 litres 10 litres 25 litres Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified. Weight n/a Size 5L, 10L, 25L
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Size 750ml 5kg Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Winstrip 2 phase hot paint stripper Alu A Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80�°C, ideal for paint stripping systems. Call us and we will be happy to advise you. Size 5L, 10L, 25L, 200L
Winstrip 2 phase hot paint stripper Alu B Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80C, ideal for paint stripping systems. Call us and we will be happy to advise you
Size 5 litres 10 litres 25 litres 200 litres Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline" Specially developed for modern powder coatings. Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures) The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc. Call us and we will be happy to advise you
Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives Size 1 litre 5 litres 15 litres The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended. Weight 1 kg Size 1l, 5l, 15l
Well-adhering cutting oil foam for targeted application to the area to be worked on. Lubricates and cools cutting tools when drilling, thread cutting, turning, milling, sawing, etc. Extends tool life, water-soluble and washable with clean water. Biodegradable, free from chlorine, sulphur and mineral oils Weight 0.5kg Size 500ml
For larger repairs to car bodies, boat hulls, fiberglass parts, plastic housings and sheet metal parts. Can be applied in several layers. Fast-curing, sandable, easy to use. Includes fabric and hardener. Polyester repair resin is a highly reactive polyester resin - suitable as a fiberglass laminate for repair purposes - adhesion to other polyester resins - adhesion to almost all metal surfaces. For repair purposes such as rust holes in metal surfaces, e.g. car bodies. For repairs to plastic parts e.g. bumpers, GRP parts. DOSAGE: Add 2-3% by weight of hardener paste. Avoid overdosing the hardener paste. This can lead to bleeding and color changes in the top coat system. POT LIFE: At +20C room temperature, approx. 7 minutes. REACTION TEMPERATURE: at least +5C. APPLICATION: by brush YIELD: 3 times the mat weight or 1 time the fabric weight.
Fast-drying primer for heavily used iron structures. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. Size 1 kg 5kg 20kg The zinc dust primer contains micronized zinc dust and an epoxy ester resin as a binder base. The product has cathodic rust protection properties and also has a sealing effect. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. The product can be used on sandblasted steel components and structures as corrosion protection, as well as for steel equipment, pipes and body parts Weight 0.3kg Size 1kg, 5kg, 20kg
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors Size 1 litre 5 litres 15 litres Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties Weight 4.93kg Size 1l, 5l, 15l
Size 1 litre 5 litres 15 litres Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ?? KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents. It is ideal for stripping wood materials. Also ideal for all types of metals and non-ferrous metals. Due to its thixotropic properties, it is suitable for vertical or upside down surfaces. Size 1l, 5l, 15l