Slitter and rewinder, overhauled Manufacturer: andreotti, italy Model : tltc/600 Manufactured: 1999 Overhauled : december, 2016 Material to be handled -cellophane from25 gsm -polyethylene from 15 micron -polyester from 12 micron -paper from 20 gsm up to 150 gsm -laminates up to max. 150 gsm Technical data Width:1500 Max. Jumbo roll dia : 1200 mm Cutting width with max. Reel diameter 500 mm With single standard reel holders: min. 70 mm / max. 210 mm With single special reel holders : min. 55 mm / max.120 mm Cutting width with max. Reel diameter 600 mm With double reel arm holding system: min. Width 220 mm / max. 600 mm -the machine or equipment is offered with six (6) months warranty from the test run at the location. -availability is subject to prior sales. -all information is given by the source, which deemed reliable.
Napkin Folding Machines Mfg: Wali (protner) Model : 131 / 132 Mfg year : 2002 Model: 131 Format: 30x30 cm Layer : 1P & 2P Fold : 1/4 Print : 2 color in-line print Model: 132 Format : 40x40 cm Layer : 1P Fold : 1/8 Print : 2 color in-line print - All machines or equipment is offered as it is where is with all faults without warranty and is subject to prior sales. - All information is given by the source, which deemed reliable. Short video available on demand
Year of manufacture: 1984 Specification:- Min size of bags: 75 - 100 mm Max size of bags: 340 - 710 mm Web guide system: FIFE Photocell system Max. Speed: 220 bags/ min Air shafts In production: yes Immediately available. Inspection on prior appointment. Information is given by the source, which deemed reliable. Availability is subject to prior sales.
Max. Wheel diameter 1575 mm [ 62ö ] Max. Wheel width 700 mm [ 28ö ] Max. Wheel weight 1750 kg Bead-breaker force 2200 kg Minimum rim diameter 14ö Max. Jant ba=lama tap² 26ö Operating pressure 120 -150 bar Power supply & motor 230 / 400 v - [ 24 v ] 3 ph Gear box 2 hp Net weight 750 kg. Width û length - height 1500 x 1800 x 750 mm (59öx73öx30ö) Case size 1600 x 2000 x 1000 mm 1600 x 2000 x 1000 mm
Kansan provides complete and compact wet wipe system solutions; in addition to flat pack and cross fold wet wipe converting machines, we also manufacture wet wipe packaging machines and lid applicators. As an internationally proven integrated wet wipe production line manufacturer, kansan offers: • efficiency and high speed • fully automatic and flexible operations • less manpower and product waste • less maintenance • easy and quick change-over • advanced level of safety and hygiene
Dear Sir or Madam, We have been making new technologies steel wool machines in Turkey. We have made of steel wool machine; One hour capacity: 200-300 Kg. Total energy: 55 Kw Knife lengt : 20 cm. Total knife :22 piece Wire inlet diameter : 2.80 Wire thick output :0.75 Top scraping Only Two operator TOTAL PRICE One piece Steel Wool Machine (Set) : 50.000 Usd One piece wire but welding machine One piece knife grinding machine One piece steel wool powder machine CONTAINER
Our machine can operate with electrical and diesel engine.
Opus 4 is a compact corner fitting booth with an elegant design that allows it to take centre stage in larger treatment rooms. Measuring just 1, 100mm x 1, 425mm x 2, 250mm height, it fits into most treatment rooms with a minimum room size of 1, 500mm x 2, 200mm x 2, 300mm height. No additional room ventilation is required as opus 4 manages its own mini-environment. Opus 4 is available for worldwide supply (except usa & canada) and requires just a single domestic plug socket for power. Opus 4 has been described by industry experts as the best automatic spray tanning booth ever introduced to the sunless tanning market but to believe it, you need to experience it in operation. The uk press simply state that the opus 4 is "brilliant". Opus 4 is being called ‘the re-invention of automated spray tanning’, designed specifically to spray all tanning brands without compromise. It’s unique fluid delivery system allows all viscosities of spray tanning fluid to be processed and if ‘tweaks’ need to be made for certain viscosities, this is easily achieved. Opus 4 is now in full production and is available from stock, available for worldwide supply. Opus 4 is pallet delivered 220cm x 140cm x 70cm and weighs 300kg. It requires a crystals limited engineer to install the booth.
The low-pressure metering machine is simple, user-friendly and low cost. Pumps, tanks and control panel are mounted on a single frame. Quality components, reliable process control, low cost, and superior after-sales support make egm metering machines the right choice for rigid, flexible, or integral skin polyurethane foam applications. Technical data > output :1000-5000 gr/min. > tank size :30lt + 30lt > temperature :Up to 150 °c > power supply :380 v / 50 hz > power cons.:12 kw > air supply:6 bar > viscosity processing range: 50 – 400 mpas (higher viscosities on request ) > variable ratio : 1:10 to 10:1 Hard case or soft case packing (depends on order)
Specifications 1) electric filler 2) filling oil, juice, perfume, etc 3) 1.44liters/min *2 4) 50-20000ml, 1 heads 5) filling all container Semi automatic filler, semi automatic filling machine, water filling machinery, liquid filling machine, edible oil filler, perfume filler, serum filler, olive oil filler, etc
304 quality steinless chrome nickel, 38-42 density polyurethane isolation fresh feed machines 20' and 40' container size
He work supplied with compressed air at min. 4 bars, 150 liter/ minute. Provide 200 liter/ minute of foam. 30 cm x 40 cm x 50 cm, 10 kg
30kgs toner powder capacity. 3 different toner powder tank - min 10 kgs each tank capasity.Lift system for The transport of toner powder. Mixer / spiral(carrier).Heavy metal body painted with anti-electrostatic paint. Power button - start/stop / emergency buttons. Control panel - 15 process entrance. Resistance - moisture meter. Inside and outside the cabin humidity and temperature meter .Changes in internal and external moisture balance. Always keep fresh toner powder without waiting for a change in chemistry due to the toner powder does not. Refill toner powder and dust pollution during the filtration and vacuum system prevents falling with a strong vacuum effect, toner dust particulates are sucked creating a better and cleaner environment. Temperature control panel - air and room temperature stabilization. Resistance system to keep a constant temperature and inside of the machine temperature. 2.10 x 90 x 90 cm
- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg
Edge-banding machine EXPERT - 4600 Technical characteristics Voltage/frequency 380 V /50 Hz Amperage 22 A Width of edge band 0.4 - 3 mm Width of the worked wood pieces 10-50 mm Feeding speed 10-20 meters/min. Total power 12,4 Kw Pressure in the machine 6 atm Air consumption 240 lt/min Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz Speed of sawing unit 4750-5250 dev/dk Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm Milling unit speed 2 x 0,55 Kw / 18000 Rpm Back channel opening 1,1 Kw / 2800 Rpm Polishing motor 2 x 0,18 Kw / 1400 Rpm WHY EXPERT 4600 Standard equipment All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor. Wide table designed for wide edge-band coils Pneumatic cutter designed to cut bands up to 3mm. Optionally the machine can be equipped by personal computer system. PLC monitor is easy to use. All the functions can be entered quickly and comfortably. Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers. SCRATCHING GROUP It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically. BACK CHANNEL CUTTING UNIT t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen. POLISHING GROUP It consists of two independent motors of 15000 rpm, that perform polishing work. SAFETY SYSTEMS In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen. Installation, technical service and personell education These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side. Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg
This machine is designed for the inserting of leaflets, letters, coupons into both large and small sized envelopes And is very reliable, economic and efficient. Comprising:- 4 x insert feeders 1 x envelope feeder Main control panel
1 pc type milling machine flp 1600x6000, titan romania, 1974(the components are generally in function, but need some repairs for aôgood lookö). If you have interest in that, please make a offer or contact us for more details. 49000 euro û ex-works timisoara, romania Milling planner titan model flp 1600 Year of manufacture 1974 Good working condition Location : timisoara, romania Technical details : Table: 5930 mm x 1600 mm Max. Work surface of table: 4250 mm x 1600 mm 83 tons - 1 pc horizontal milling machine model 2620v, urss û 15000 euro ex-works timisoara, romania- 15-20 tons.
We`re manufacturing a wide range of electrical contat rivets as well as the machines for the production of solid and bimetal contact rivets. Acc. To the wishes of our customers.
OZ-5-S FULL AUTOMATIC BRIDGE CUTTING machine is designed for small workshops as well as for big plants to cut marble, granite and etc. slabs to required dimensions
Industrial soap machine
