Find Verified Industrial Machinery Plants Suppliers, Manufacturers and Wholesalers

The wire drawing machine is a heavy duty wire drawing machine, engineered for the drawing of high strength, high performance steel wire.
Our steel drawing machinery has a whole list of functions including an advanced user interface and a highly reliable motor overheating protection device.
Reduction rates per cross section are % 18 - % 25.
Engine power per each head 30 kw. 380 volt. Triphase.inverter speed controlled.
Wire feeding with clamp is maintained by low revolution pedal. Heads are special alloy gg 25 chrome reinforced cast iron.

Visit our website and contact us for further information.


1 x 40' container

Mig-Mag Welding Machines
Cheap and rapid welding. Aluminum and stainless stel welding. High tension strenght. Low splash. Three phase constant voltage rectifier. Automatic or manual welding. Adjustable output choke.

Technical Specifications MIG/MAG 160A MIG/MAG 250A MIG/MAG 350A MIG/MAG 450A MIG/MAG 500A
Main Voltage V 380 380 380 380 380
Frequency Hz 50-60 50-60 50-60 50-60 50-60
Max Power Kva 3,5 8,5 12 16,5 27
Welding Current %100 A 160
130 250
200 350
300 450
350 500
420
Number of stages 18 18 18 40 40
Open Circuit Voltage V 16-25 16-32 18-38 18-44 18-47
Adjustment Range A 20-160 30-250 40-350 40-450 50-500
Wire feet Rate m/dk 1-15 1-15 1-20 1-20 1-20
Electrodes dia. m/m 0.6-0.8 0.6-1.0 1.8-1.2 1.8-1.6 0.8-2
Protection IP21 IP21 IP21 IP21 IP21
Cooling F F F F F
Isolation H H H H H
Weight kg 70 100 115 175 200

Welding Rectifier
Technical Specifications RDK - 250 RDK - 350 RDK - 450 RDK - 450
Main Voltage V 380 380 380 380
Frequency Hz 50-60 50-60 50-60 50-60
Max Power Kva 7,5 12 18 20
Welding Current %60 A 160
250 250
350 350+
450 420
500
Open Circuit Voltage V 80 DC 80 DC 80 DC 80 DC
Adjustment Range A 20-250 20-350 20-450 20-500
Electrodes dia. m/m 1.5-5 1.5-6 1.6-8 1.5-10
Welding Cable Cross mm 25 35 50 70
Cooling AIR AIR AIR AIR
Protection IP21 IP21 IP21 IP21
Weight kg 198 223 248 265

Automated Spot Welding Machine:
Technical Specifications
* Pneomatic System
* PLC Controlled digital remote control
* 6 to 40 programs capacity
* 2 to 40 ns piece pistons
* Different current value for each pistons
* Lock of individual pistons
* 2 axis piston groups
* Railed, car system
* 1 to 20 mm cadet spot welding
* Pedal warning
* 380 volt 2 phase input
* 20 volt dc inductor
* Water cooled
* Moving bottom table

Welding Transformers:
Technical Specifications TR 250 TR 350 TR 400 TR 450
Main Voltage V 220 220-380 220-380 220-380
Frequency Hz 50-60 50-60 50-60 50-60
Max Power Kva 6 9 12 15
Max . Welding Current A 250 350 400 450
Min . Welding Current A 40 40 70 70
Welding Cable Cross mm 16 25 35 35
Electrodes dia. m/m 2.5-3.25 2.5-4 2.5-5 2.5-6
Weight kg 22 71 94 118.

Product Code: CM-01-SET-V
Installed Capacity: 850+650=1500 Watt (Double Resistance)
Supply Voltage: 220-240V ~
Frequency: 50-60 Hz.
Operating Temperature: 270 ° C
Cable: 3X1 mm² cable fireproof up to 200 ° C has been used.
Thermostat Regulation Indicator: 50-320 ° C
Resistor Material: Stainless Steel
Main Supply Cross Section: 3 x 2.5 mm² Supply Cable
Protection Class: IP 44
Main Fuse Value: 16 A (on the power connection line)

Other Remarks:
a- Three heads can be simultaneously installed on the iron.
b- The ON-OFF switch has been equipped with a light indicator for easier operation.
c- A special aluminum floor foot with a clamp has been installed providing the ability to operate everywhere.
d- The welding machine set includes heads of 20,25,32,40 mm, plastic pipe shears of 16-42 mm and other apparatuses you might need for PPRC welding.

Weight: 6.1 Kg (net)---6.2 Kg (gross).

1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding are available in the toolbox set.
4-1500 watt and more specific material it has.

1-Double heating elements with thermostat heating elements made of noncorrosive material.
2-Yoke foot.
3-All aparatus required for PPRC welding machine are avilable int he toolbox.
4-1500 watt and more

1-Duble heating elements with thermostat.Heating elements made of noncorosive material.
2-Yoke foot.
3- Alll aparatus required for PPRC welding machine are available in the toolbox set.
4-1500 watt
5-Guaranteed for 1 year.
6-Fibre -framed machine
7-Welding machine(capable of welding the pipe diameters up to 1,5 inch)

1-Double heating elements with thermostat.Heating elements made of noncorrosive material.
2-Yoke foot.
3-All apparatus required for PPRC welding are available in the vacuumed toolbox set.
4-1500 watt.
5-Guaranteed 1 year.
6-Fibre -framed machine.
7-Welding machine(capable of welding machine diameters up to 2,5 inch)

1-Double heating elements with thermostat.Heating elements made of noncorrosive.
2-Yoke foot.
3-2000 watt
4-Guaranteed for 1 year.
5-Fibre framed machine(dielectric and heatproof fireproof light and shockproof)
5-Welding machine 50-125mm(capable of welding the pi diameters up to 5 inch)

Used for ppr pipes and fittings welding

Ability of simultaneous cutting the two corners of pvc and aluminum profiles at the same time.
The machine is computerized, finding the measure and cutting automatically.Has a memory for cutting by sensitivity of 0, 2mm and unit stopper.
Right head is constant and only left head is flexible.
Possibility of one head cutting when needed.
There is hydro-pneumatic system and it is possible to cut at desirable speed without vibration
Diamond saws diameter is 420 mm.
Capable of cutting at 45-90 v45 degrees and interval degrees.
Flexible head can be moved millimetrically.

Width 4000 mm
Depth 800 mm
Height 1500 mm
Voltage 400 v 3 npe
Frequency 50 hz
Total power 3.5 kw
Air pressure 6-8 bar
Air consumption 70 lt. / min
Max. Cutting profile lengths 4000 mm
Min. Cutting profile lengths 300 mm
Machine weight 800 kg
Standard machine color ral 7032

Electrode boxes in all dimensions

Any

Titanium wire

Grade 2
Vt-20
2v

U=380v/50hz
P=28kva
Water cooling
Phase regulator
Time regulator
Leg leading or with higher prices-pneumatics

Weight - 56kg
Dimensions - 45/50/130cm

Product name
62S Plus Fusion Splicer
Model No.
62S Plus+ WITH CT-08
Dimensions
46 W x 159 D x 150 H (mm)
Cladding Diameter
80 to 150 microm
Power Supply
100 to 240 V AC
Wind Protection
Maximum wind velocity of 15 m/s (34 mph)
Weight
2.5 Kg
Coating Diameter
100 to 1000 microm
Fiber Cleave Length
5 to 16 mm
Splicing Modes
100 preset and user programmable modes
Product Keywords
Traditional Core Alignment with the 62S+ Fiber Splicer

"* Power ON self-test (POST). when machine switched on , the system does full inspection and testing on welder conditions, that protect components especially key components like IGBT, diode , capacitors , circuit board, etc .
* Full functions with thermal protection , over load protection , anti-stick , arc force , VRD .
* Suitable for a wide range of voltage from 160V-260V .
* Energy saving . if the welder not in use for few minutes , the welder will automotically swtich to sleep mode . if still not use after sleep mode , the welder will swtich off automatically .
* Can be used to welder acid electrode rod and alkaline (basic ) electrode rod .
* Accessories 200A electrode holder+16mm*1.6M 200A earth clamp+16mm²*1.3* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.6M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-4.0mm
*FREQUENCY: 50/60Hz
* VOLTAGE: AC 160-260V
* Output current range (A): 20-300
* POWER: 5.5KW
* CE Standard

"* Digital displayer
* Thermal protection
* Built-in arc force
* Anti-stick
* Hot start
* 200A electrode holder+16mm²*1.6M
* 200A earth clamp+16mm²*1.
* Face mask Brush
* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.2M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 16mm²*1.6M 16mm²*1.3M
*DUTY CYCLE: 30%
* Usable electrode (mm): 1.6-4.0mm
* FREQUENCY: 50/60Hz
* VOLTAGE: AC 220-240V
* Output current range (A): 20-250
* POWER: 5.0KW
* CE Stander "

"*Digital displayer
*Thermal protection
* Built-in arc force
* Anti-stick hot start
* 200A electrode holder+14mm²*1.6M
* 200A earth clamp+14mm²*1.3M
* Face mask, Brush
* CABLE CORD SIZE / LENGTH: 3*1.5mm² , OUTSIDE 1.2M ;VDE euro two pins plug COPPER CABLE
* Output cable size/length: 14mm²*1.6M 14mm²*1.3M
* DUTY CYCLE: 60%
* Usable electrode (mm): 1.6-3.2mm
* FREQUENCY: 50/60Hz
* VOLTAGE: AC 220-240V
* Output current range (A): 20-200
* POWER: 4.5KW
* CE Standard