Opus 4 is a compact corner fitting booth with an elegant design that allows it to take centre stage in larger treatment rooms. Measuring just 1, 100mm x 1, 425mm x 2, 250mm height, it fits into most treatment rooms with a minimum room size of 1, 500mm x 2, 200mm x 2, 300mm height. No additional room ventilation is required as opus 4 manages its own mini-environment. Opus 4 is available for worldwide supply (except usa & canada) and requires just a single domestic plug socket for power.
Opus 4 has been described by industry experts as the best automatic spray tanning booth ever introduced to the sunless tanning market but to believe it, you need to experience it in operation. The uk press simply state that the opus 4 is "brilliant".
Opus 4 is being called ‘the re-invention of automated spray tanning’, designed specifically to spray all tanning brands without compromise. It’s unique fluid delivery system allows all viscosities of spray tanning fluid to be processed and if ‘tweaks’ need to be made for certain viscosities, this is easily achieved.
Opus 4 is now in full production and is available from stock, available for worldwide supply.
Opus 4 is pallet delivered 220cm x 140cm x 70cm and weighs 300kg. It requires a crystals limited engineer to install the booth.
The low-pressure metering machine is simple, user-friendly and low cost. Pumps, tanks and control panel are mounted on a single frame. Quality components, reliable process control, low cost, and superior after-sales support make egm metering machines the right choice for rigid, flexible, or integral skin polyurethane foam applications.
Technical data
> output :1000-5000 gr/min.
> tank size :30lt + 30lt
> temperature :Up to 150 °c
> power supply :380 v / 50 hz
> power cons.:12 kw
> air supply:6 bar
> viscosity processing range: 50 – 400 mpas (higher viscosities on request )
> variable ratio : 1:10 to 10:1
The equipment is designed and manufactured by Gough & Co Ldt, UK in year 1999 / installed in 2000, manufacturer’s type single deck Vibracon GVF4. We have totally 3 identical units which were dismantled in 2007 and all of them are in very good operational condition. These are single deck circular screen design for high velocity scalping, de-watering or single deck separation in chemical and pharmaceutical industry. (These units were screening oversized particles in PVC - granulate factory truck loading station) The perforated screen and all product touching parts are made on stainless steel AISI 304L. Top deck houses the screen and the discharge spout for oversize particle removal is fitted to it. Top deck is supported with mechanical spring and vibration movement is created by two contra rotating vibrating motors on the outside of the unit so there are no internal working parts. Vibration power can be adjusted.
Technical data:
Type: Vibracon GVF 4
Material: AISI 304L – product touching parts
Perforated screen: Mesh size 4 mm
Screen diameter: 1100 mm
Screen area: 9500 cm2
Vibrators: 2 x 0.52 kW units.
The vacuum evaporator is made by Italian Ecoteck in year 2003 and operation was stopped in early 2009 and it is in very good operational condition. This unit is made for concentrate acidic liquid wastes and therefore all liquid touching parts are made of acid proof steel ( SS 2353) or PVC. The evaporation capacity of the unit is 5000 liters / day. The unit is a complete working unit and it includes evaporator, boiler, heat pump, centrifugal pump, water-air cooler, steam ejector, control unit and all other necessary equipment to complete the unit.
Operation principle:
Steam rises from the boiler through a drop dispenser to the cooling unit where it condensates. The condensate drops with the gravity down to vacuum system. In-build heat pump heats up the cooling media and simultaneously cools down the condensate. Water – air cooler cools down the extra heat from the process. Necessary vacuum is generated with a centrifugal pump and a steam ejector. Condensate rejection takes place in accordance with prescheduled frequency.
Technical data:
Manufacturer: ECOTECH Srl Italy / Vilokan Ren Miljöteknik Sweden
Type: ECO 5000 VS-HP, R407C
Year made: 2003
Evaporation capacity: 5000 liters / 24 hour (pure water)
Electricity consump.: about 0,15 kWh / liter pure wateri)
Control unit: Siemens Micromaster 420
Compressor: Bitzer Kuhlmachinenbau GmbH,
Compressor type: 6G-40,2
Compressor capacity: 126.8 m3/h, 19/28 bar
Refrigenerant: R 407 C
Main dimensions: 2.8 m x 1.3 m x 2.9 m
Weight: 1500 kg.
30kgs toner powder capacity. 3 different toner powder tank - min 10 kgs each tank capasity.Lift system for
The transport of toner powder. Mixer / spiral(carrier).Heavy metal body painted with anti-electrostatic paint.
Power button - start/stop / emergency buttons.
Control panel - 15 process entrance.
Resistance - moisture meter. Inside and outside the cabin humidity and temperature meter .Changes in internal and external moisture balance. Always keep fresh toner powder without waiting for a change in chemistry due to the toner powder does not. Refill toner powder and dust pollution during the filtration and vacuum system prevents falling with a strong vacuum effect, toner dust particulates are sucked creating a better and cleaner environment.
Temperature control panel - air and room temperature stabilization. Resistance system to keep a constant temperature and inside of the machine temperature.
- Due to circulational cooling system the pressing process is done faster.
- There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer.
- There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable.
- Press head lifters are designed to prevent swashes of the head of the machine.
-Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same.
-After recent modifications the quality of covering of wood pieces with PVC has risen.
-The machine is extremely easy for use, so it can be used even by low-qualified workers.
-There is one machine better than this one- it is membrane-vacuum press with additional air pressure.
Vacuum 40 m3/hour
The dimensions of the machine
2800 x 1600 mm x 1500 mm
Total power 27,5 Kw
The dimension of the worktable 1400 x 2500 mm
The area of the worktable used 1200 x 2300 mm
The time required for pressing process (up to material) 2-20 min.
Circulational cooling system
The system of automaic fixing of PVC or similar materials.
Edge-banding machine
EXPERT - 4600 Technical characteristics
Voltage/frequency 380 V /50 Hz
Amperage 22 A
Width of edge band 0.4 - 3 mm
Width of the worked wood pieces 10-50 mm
Feeding speed 10-20 meters/min.
Total power 12,4 Kw
Pressure in the machine 6 atm
Air consumption 240 lt/min
Working height 850 mm
Width 920 mm
Length 4600 mm
Height 1600 mm
Weight 2000 Kg
The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz
Speed of sawing unit 4750-5250 dev/dk
Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm
Milling unit speed 2 x 0,55 Kw / 18000 Rpm
Back channel opening 1,1 Kw / 2800 Rpm
Polishing motor 2 x 0,18 Kw / 1400 Rpm
WHY EXPERT 4600
Standard equipment
All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor.
Wide table designed for wide edge-band coils
Pneumatic cutter designed to cut bands up to 3mm.
Optionally the machine can be equipped by personal computer system.
PLC monitor is easy to use. All the functions can be entered quickly and comfortably.
Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers.
SCRATCHING GROUP
It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically.
BACK CHANNEL CUTTING UNIT
t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen.
POLISHING GROUP
It consists of two independent motors of 15000 rpm, that perform polishing work.
SAFETY SYSTEMS
In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen.
Installation, technical service and personell education
These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side.
Working height 850 mm
Width 920 mm
Length 4600 mm
Height 1600 mm
Weight 2000 Kg
This machine is designed for the inserting of leaflets, letters, coupons into both large and small sized envelopes
And is very reliable, economic and efficient.
Comprising:-
4 x insert feeders
1 x envelope feeder
Main control panel
1 pc type milling machine flp 1600x6000, titan romania, 1974(the components are generally in function, but need some repairs for aôgood lookö). If you have interest in that, please make a offer or contact us for more details. 49000 euro û ex-works timisoara, romania
Milling planner titan model flp 1600
Year of manufacture 1974
Good working condition
Location : timisoara, romania
Technical details :
Table: 5930 mm x 1600 mm
Max. Work surface of table: 4250 mm x 1600 mm
83 tons
- 1 pc horizontal milling machine model 2620v, urss û 15000 euro ex-works timisoara, romania- 15-20 tons.
OZ-5-S FULL AUTOMATIC BRIDGE CUTTING machine is designed for small workshops as well as for big plants to cut marble, granite and etc. slabs to required dimensions
Technical data
Thickness frames Min. Max. Mm 6-80
Width frames Min. Max. Mm 6-70
Storage capacity N. 230
V-nails size Mm 7-10-15
V-nails size on request Mm 3-4-5-12
Pneumatic feed Psl 40-80
Air consumption 3, 5 ni / 5 bar
Weight Abt. Kg. 28
Height of working bench Mm130
Overall dimensions Mm 400x400x450
Thickness frames Min. Max. Mm 6-80
Width frames Min. Max. Mm 6-80
Storage capacity N. 220
V-nails size Mm 7-10-15
V-nails size on request Mm 3-4-5-12
Weight Abt. Kg. 50
Height of working bench Mm1000
Overall dimensions Mm 400x450x1250
Technical data
Maximum cut Blade ° 350-width 80mm-height 80mm
Max. Production/hour 500 / 600 cuttings
Motors No. 2, 2 hp. 2800 rpm
Hole suction + 80 mm
Electric power supply 380 / 220 v
Power absorbtion 3 kw
Pneumatic feed 80 psi
Air consumption 8 ni / 5 bar
Weight 380 kg
Dimensions 1200x1300x1750
