LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch.
LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output.
The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate.
Portable and lightweight
Moistureproof and dustproof case
Advanced LiFePO4 internal battery with fast charging option
High-contrast graphic OLED display
Multifrequency operation
Operating frequencies can be changed upon request
Internal transmission loop antenna
Automatic load impedance matching
Ability to work with energized 0.4kV cables (inductive connection)
Overload protection
Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Automatic circuit breaker tester UPA-3 is designed for testing and ampere-second characterization of automatic AC current circuit breakers. The device allows registering the value of the supplied current and timing the automatic circuit breaker switching interval.
Circuit breaker tester UPA-3 is a mobile device, which could be easily transported to a required testing location.
Circuit breaker tester UPA-3 operates on the principle of varying the power in the primary circuit of the matching power transformer and, respectively, varying the output current, flowing through the automatic circuit breaker under the test. Power regulation could be done either through an external regulator (RNO or VR) or through a built-in thyristor controller.
Ballast modeldescriptionwattage (w)main current (a)power factorinput voltage(v)frequency(hz)weight (kg)dimension
(w-l-h)other parameters
Svlb5050 watt sodium vapor lamp ballast500, 760, 45220-240 50-60 1, 1121 x 67 x 49 mmtw130, â??t70
Svlb7070 watt sodium vapor lamp ballast7010, 43220-240 50-60 1, 1121 x 67 x 49 mmtw130, â??t70
Svlb150150 watt sodium vapor lamp ballast1501, 80, 43220-240 50-60 2, 1128 x 87 x 73 mmtw130, â??t70
Svlb250250 watt sodium vapor lamp ballast25030, 45220-240 50-60 2, 9128 x 87 x 73 mmtw130, â??t70
Svlb400400 watt sodium vapor lamp ballast4004, 60, 40220-240 50-60 tw130, â??t70
Advantages
Good efficiency (lumens per watt)
Fitting into many fixture types
Can be retrofitted into older mercury vapor fixtures
Smaller size and better bulb life than lps lamps
Applications
Street & urban lighting
Outdoor lighting
Municipal lighting
Home yard lighting
High bay lighting
Technical features
Wire type:enameled copper
Body material:nylon 66 or nylon 6 fireproof material (with fiber glass) for carcass.
Siliceous sheet on body parts
Protection type:thermal protection
Standards:ts en 61347-2-9, en 60923
Average lifetime:tw marking 130â?� (average lifetime of 10 years continuous operation @ 130â?�)
Other specifications:high quality screw-in or insert terminal blocks as standard
Quick and easy wiring
Long lifetime
Compact design
Contact us;
Head office
Soganlik yeni mah. Ataturk cad. No: 6/1 else apt. Daire: 9 (kat: 8), 34880
Kartal / istanbul
Factory
Kucuk sanayi sitesi 25. Cadde no: 77/a
Corum-turkey
Ballast model wattage Main current power factweightdimension
Flb18 18 w 0, 37 a 0, 48 0, 4 k151 x 42 x 28 mm
Flb20 20 w 0, 37 a 0, 48 0, 4 k151 x 42 x 28 mm
Flb36 36 w 0, 43 a 0, 47 0, 4 k151 x 42 x 28 mm
Flb40 40 w 0, 42 a 0, 47 0, 4 k151 x 42 x 28 mm
Flb58 58 w 0, 67 a 0, 50 0, 4 k151 x 42 x 28 mm
Flb65 65 w 0.67 a 0, 47 0, 8 k155 x 41 x 32 mm
Advantages
High efficacy factor
Low operating cost
Less heating
Doesnt cause glaring
Various white color options
Suitable for high intensity light
Technical features
Wire type : enameled copper
Body material : nylon 66/nylon 6 fireproof material (with fiber glass) for carcass.
Siliceous sheet on body parts
Standards : ts en 61347-2-8
Average lifetime : tw marking 105â?� (average lifetime of 10 years continuous operation @
105â?�)
Other specifications
High quality screw-in or insert terminal blocks as standard
Quick and easy wiring
Long lifetime
Silent working
Our company addresses;
Head office
Soganlik yeni mah. Ataturk cad. No: 6/1 else apt. Daire: 9 (kat: 8), 34880
Kartal / istanbul
Factory
Kucuk sanayi sitesi 25. Cadde no: 77/a
Corum-turkey
WE EXPORT WORLD WIDE USED LCD COMPUTERS MONITORS
ALSO NON WORKING LCD MONITORS
FROM 15 INCH- 17 INCH- 19 INCH 20 INCH 22 INCH.
ALL SCREEN TESTED WORKING. NO SPORT. NO DEEP SCRACTH.
LOOKING FOR BUYERS.
Engine : Cummins - Mitsubishi - Perkins
Alternator : Stamford - MeccAlte - Mitsubishi
Control System : P 732 control system
Water cooled diesel engine Radiator with mechanical fan Protective grille for rotating and hot parts Electric starter and charge alternator Starting battery (with lead acid) including rack and cables Engine coolant heater Steel base frame and anti-vibration isolators Spare external fuel tank (open set) Flexible fuel connection hoses Single bearing, class H alternator Industrial exhaust silencer and steel bellows supplied separately Static battery charger Manual for application and installation Generators Sets’ voltage and frequency regulation comply with ISO 8528-5 Generators Sets’ can take 100% load at one step according to NFPA110
ISO8528
This generator set has been designed to meet ISO 8528 regulation.
SZUTEST
This generator set is manufactured in facilities certified to ISO 9001.
This generator set is available with CE certification.
2000/14/EC
Enclosed product is tested according to EU noise legislation 2000/14/EC
We are manufacturer of ovens, stoves, furnaces, heaters and other appicants from Turkey. We can make private label production for brands as well. You can see more details from our webpage.
There is a good market in your country for these categories.
We are able to manufacture annually 10 million pieces.
We can also produce new designs or products do not exist in our line but can be manufactured order basis in need of client in any category in kitchen and home appliances.
We have R&D and innovation skills too.
Our price range for heaters 17-30 usd
for 33 liters ovens 23-38 usd
for 40 liter ovens with hot plate 48-55 usd
All of the are CE, ISO certificated and we can provide guarantee.
We can manufacture different size of these products in ovens for instance 18liters 33 liters 39 liters sizes. You can look at the technical specifications of the products from ourwebpage by model numbers.
A truck or container includes avaragely 2000 miniovens and a truck goes to Hungary for 3000-4000 EURO which means there will be between 1- 2EURO shipping cost on those prices.
Regarding prices there are many low quality products in the market which can make your brain confused but we work with very small profit in this category. We use A grade steel sheets, special paints, electrical parts.
We apply EU standards at production and we can make private label production.
We are manufacturer of ovens, stoves, furnaces, heaters and other appicants from Turkey. We can make private label production for brands as well. You can see more details from our webpage.
There is a good market in your country for these categories.
We are able to manufacture annually 10 million pieces.
We can also produce new designs or products do not exist in our line but can be manufactured order basis in need of client in any category in kitchen and home appliances.
We have R&D and innovation skills too.
Our price range for heaters 17-30 usd
for 33 liters ovens 23-38 usd
for 40 liter ovens with hot plate 48-55 usd
All of the are CE, ISO certificated and we can provide guarantee.
We can manufacture different size of these products in ovens for instance 18liters 33 liters 39 liters sizes. You can look at the technical specifications of the products from ourwebpage by model numbers.
A truck or container includes avaragely 2000 miniovens and a truck goes to Hungary for 3000-4000 EURO which means there will be between 1- 2EURO shipping cost on those prices.
Regarding prices there are many low quality products in the market which can make your brain confused but we work with very small profit in this category. We use A grade steel sheets, special paints, electrical parts.
We apply EU standards at production and we can make private label production.
We are manufacturer of ovens, stoves, furnaces, heaters and other appicants from Turkey. We can make private label production for brands as well. You can see more details from our webpage.
There is a good market in your country for these categories.
We are able to manufacture annually 10 million pieces.
We can also produce new designs or products do not exist in our line but can be manufactured order basis in need of client in any category in kitchen and home appliances.
We have R&D and innovation skills too.
Our price range for heaters 17-30 usd
for 33 liters ovens 23-38 usd
for 40 liter ovens with hot plate 48-55 usd
All of the are CE, ISO certificated and we can provide guarantee.
We can manufacture different size of these products in ovens for instance 18liters 33 liters 39 liters sizes. You can look at the technical specifications of the products from ourwebpage by model numbers.
A truck or container includes avaragely 2000 miniovens and a truck goes to Hungary for 3000-4000 EURO which means there will be between 1- 2EURO shipping cost on those prices.
Regarding prices there are many low quality products in the market which can make your brain confused but we work with very small profit in this category. We use A grade steel sheets, special paints, electrical parts.
We apply EU standards at production and we can make private label production.
