In the construction sector, concrete buckets are used in the construction sites at the points where concrete mixer or pump cannot reach. The concrete bucket used as connected to the tower crane allows the transfer of the mortar to the desired area. They are practical products that provide efficiency especially for the construction industry to transfer concrete or mortar.
Construction material (tiles, marble...) and construction machinery.
Used Good Condition 2021 Year second-hand 3T Forklifts
KMS 1400 New Generation Concrete Pipe Machine; It produces Concrete Pipes from 300mm to 1400mm in line with the demands of our customers, from minimum 1000mm to maximum 2500mm in length in accordance with Iller Bank TSE 821 specification. It is manufactured in a way to make double or triple production according to customer demands. Three molds for300mm Concrete Pipe, two molds for 400, 500, 600mm Concrete Pipes and one mold for other diameters can be connected at the same time. â?¢ Molds and Pallets with Integrated Gasket or Drop Section Gasket are produced in line with the demands from �?300mm to �?1400mm. â?¢ It provides the possibility of mass production from �?300mm to �?1400mm without crane, it produces 2 times more than the system with crane. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator. Pallets; It is produced on CNC lathes according to its dimensions and by pressing method. Manufactured Concrete Pipes are transported to the Drying area by Forklift.
KMS 800 Triple System Concrete Pipe Machine; It produces Concrete Pipes between 150mm and 800mm in minimum 1000mm and maximum 2000mm lengths in accordance with Seller Bank TSE 821 specification. Three molds for 150mm and 200mm Concrete Pipes, two molds for 300mm Concrete Pipes and one mold for other diameters can be connected at the same time. Molds and Pallets with Integrated Gasket or Drop Section Gasket are produced in line with the demands from �?150mm to 800mm. Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are used in the vibrator. â?¢ Pallets; It is produced on CNC lathes according to its dimensions and by pressing method. Manufactured Concrete Pipes are transported by forklift and shipped to the Drying area. Triple System Concrete Pipe Machine has been designed to produce concrete pipes in the fastest and fastest way.
Doors.
Blocks, bricks, poured concrete, armor doors for bunkers and systems of special concretes for radioprotection against gamma (³) and neutron rays .
Marble, textile materials.
A spray paint for marking masonry, pavements, asphalt, cement and wood. It is resistant to weathering and wear. It is available in fluorescent colors. The product comes with a special 360 valve, so it can be used in any position.
Ideal for creating general parking signs and signaling danger zones. To make visible the terms of reference such as siting, excavation, demarcation of maintenance works. It is resistant to weathering and chemicals. It can be used on numerous surfaces such as cement, asphalt, glass, wood, synthetic materials. Lines of high precision can be made with this product. The width of the line can vary from 4 to 6 inches depending on the setting. The length varies depending on the traveling speed and the porosity of the surface: 40-50 m.
PAINT REFILL DME Bottle filled with 300ml mix of solvents, propellants and additives. It is compatible with most paints: acrylic, nitro-acrylic, nitro-synthetic, nitrocellulose. The reseller adds the paint according to the required color. In case of special filling the color can slightly change. We recommend using the product soon after filling the paint
A special paint that temporarily changes the color of a surface. It can be used on non-porous surfaces. It creates a decorative, protective removable film and has a soft touch effect. The original surface remains intact after the painted surface has been removed. It can be used on cars, sports gear, furnishings and more. To apply, vigorously shake the bottle for at least 1 minute, until the marbles inside the can move freely. Carefully clean the surface before application. Keep a distance of 20-30cm/8-1 2in. Apply 4 to 5 crossed layers (horizontal and vertical), each one every 10-15 minutes. It will be completely dry approximately 2 hours after application
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects.
It is a multipurpose paint designed for indoor and outdoor use. It is dry to the touch approximately 15 minutes after use and its completely dry approximately 22 hours after application. It can be used on various surfaces including wood, metal, glass, ceramic, plastering, masonry, doors, furniture, radiators, ornaments, and other objects
Water based paint with a ultra matt finish effect, suitable for both indoor and outdoor use. It's ideal for decorating any common surface such as metal, plastic, glass, ceramic etc. especially suitable for turning your old wood furniture into a vintage/modern piece of art. Fast drying finish, low VOC. After your application, when the paint is dry, It is advisable to add wax or transparent varnish which provides that protective layer on your newly modified piece
It's a professional enamel spray that is resistant to scratches, alcohol and gasoline. Ideal for painting tractors and agriculture machines. Before applying this paint it is mandatory to use the suitable primer (V400PRIMER3 or V400PRIMER5) Sku : V400CAR
It is the enamel that makes surfaces bright and visible from a distance, even in the absence of light. The fluorescent effect is brought out by applying AMBRO-SOL FLUORESCENT on a white background. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku : V400FLUOR
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300 C-700 C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don't expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180 ' C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it's advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle. Sku:V400TEMP
It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers. Sku:V400FAS
It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture. Sku:V400MIC
