Specification of products Est 12 Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products Portofino Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products Rome Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products Firenze Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1126W +1126 W External Dimensions (W * D * H) mm 1220 * 1245 * 1370 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 450 Tray Capacity lt 12x5
Specification of products CLW 390 VGA Climate Class C 4 Operating Temperature DEG C +2 / +10 Energy Consumption KWh/24h 2.6 Power W 310 Type of Refrigerant R134A Box Capacity (0.33 lt) pcs 449 Net Dimensions (W * D * H) mm 510 * 470 * 1575 External Dimensions (W * D * H) mm 590 * 620 * 1885 Packed Dimensions (W * D * H) mm 630 * 635 * 1960 Gross Volume lt 390 Net Volume lt 365 Gross Weight kg 78 Dead weight kg 83
Specification of products Lyra 16 Climate Class C 4 Operating Temperature DEG C -18/-22 Voltage / Frequency 220V/50Hz Type of Refrigerant A r134a/r404 Cooling System Air Blown Compressor number 2 Compressor Glue Compressor Power 1439W +1126 W External Dimensions (W * D * H) mm 1580 * 1250 * 1385 Insulation Density kg/m3 38 ~ 40 Defrost Automatic Defrost type Hot gas + Resistance Gross Weight kg 460 Tray Capacity lt 16x5
h breast Vs. raw •Better physical development of the calf (both in terms of mass and digestive apparatus) Vs. traditional milk replacers •Economic gain, as it enables to process and reuse non-saleable powder cost is about 150-200 euros/100 kg) •Reduction in the rate of mortality, if compared with the adoption of the traditional replacer. The pasteurizer for calves, PLV series, is equipped with a container with triple wall, insulated, made entirely of stainless steel. The heating system is electric and runs directly from the machine with heating elements in a water bath (bain marie system). The pasteurizer is available in different capacities from 75 to 500 l. A mobile version provided with wheels is recommended up to the capacity of 100 l, after which the recommended d 100 l. The pasteurizer is available in different capacities from 75 to 500 l. Packing details depend on capacity.
85 x 217 cms 150 kg Portable, movable indoor & outdoor ice cream stand inclueded spagetti press
Full cream whole milk powder 26% Moisture : 2.5% max Lactose : 36.0% min Butterfat : 26.0% min Protein; 24.0% min Ash: 7.0% max Solubility index: 1.0 max Titratable acidity: 0.15 max Colour: cream/white Flavour: pleasant Standard plate count: 50000 cfu/g max Coliforms: 10 cfu/g max Staphylococcus: 10 cfu/g max Salmonella : negative E. Coli : 10 cfu/g max S. Aureus: 10 cfu/g max Yeast & moulds: 250 cfu/g max Sediment disc: (/25g)disc 2 max. 25kgs bags
Specifications: H= 3-90 mQ= 5-550 m³/h Description: DESTINATION * Industrial water supply; * On the building sites; * In agriculture for irrigation; * As cooling-water pumps; * To increase the pressure in various industrial installations; * Clean o slightly polutted liquids of which temperature doesn't exceed 105°C; PARAMETERS: * FLOW 5-550 m³/h * TOTAL HEAD 3-90 m * TEMPERATURE max. 105 °C OPTIONS: * Special design for temperatures of the circulated liquid up to 130°C; * Internal-combustion engine driving; * Various manufacturing materials (Br,Al). * Various speeds of the driving electric motor: 750 rpm; 1000 rpm; * 60 Hz frequency; * Various voltage ratings: 220V; 380V/415V; 500V; * Various classes of insulation: E, F; * Various protection classes of the electric motor: IP54T3; EXD II CT4; ANTIGRI. * Various sealings materials; DESIGN: * Centrifugal mono-staged pumps with horizontal axle; * Axial suction; horizontal or vertical discharge; * Overhung mounted impeller; * Oil-bath lubrication; * Sealing with graphitized cord and stuffing box; ADVANTEGES : * Long life; * Easy assembly; * The steel base plate provides good vibration absorption; * Standard manufacturing materials; * Interchangeability of pump parts as well as of the pumps as part of the pumping machinery; MOTOR: * THREE-PHASE CURRENT: Speeds 1450; 2900; rpm Nominal power 0, 55-75 KW Voltage 220/380; 380/660 V Frequency 50 Hz Class of Insulation B Protection class IP54 ... Depending on the customer requirements.
Millma Square Plansifter main body is made of steel construction. Oscillation is performed from center of gravity by weight assembly attached from top and bottom parts. It enables to classify milled product cleanly and routinely owing to cycloid swinging body by centrifugal force and frames with various dimensions.
Millma semolina purifiers are used for the purpose of cleaning and classifying semolina in flour and semolina milling factories. Its sieves consist of double units and three layers. It is actuated by two vibro motors and equipped with in order to enable sensitive air adjustment. Sieves are cleaned by brushes against blockage. Brushers are operated by vibration.
Millma roller mills have huge power and capacity and they are produced using excellent engineering and labour. Models of single and double decks are available. Feeding screen is controlled as servo in order to keep the flow rate of flowing product and they supply non-stop feeding.
Our company produces all types of machinery required for cleaning, milling, handling and packaging cereals. Therefore we can provide turn-key plants for; • Wheat flour and semolina factories, • Corn flour and semolina factories, • Cleaning and milling systems for various crops such as barley, rye and oat, • Cleaning and milling systems for spices, • Cleaning legumes, • Cleaning seeds, • Grain silos, • Feed Mills.
Scrap Fishnet.
- Vacuum : Direct coupled to motor, 200 lt/min capacity, dry/oily type vacuum pump - Motor : 0.55 kW (0.75 HP), 50 Hz, 1425 rpm, 220 V, monophase - Bucket volume : 30 lt or 40 lt on request - Bucket material : AISI 304 Stainless steel or Aluminium on request with transparent lid - Cluster : Plastic cluster, SS nipple case - Pulsator : 1 pc. 60/40 pneumatic pulsator - Chasis : Galvanised, electrostatic painted steel - Vacuum tank : Galvanised, electrostatic painted steel - Weight : 55 kg.
•Vacuum : Direct coupled to motor, 200 lt/min capacity, dry/oily type vacuum pump •Motor : 0.55 kW (0.75 HP), 50 Hz, 1425 rpm, 220 V, monophase •Bucket volume : 30 lt or 40 lt on request. •Bucket material : AISI 304 Stainless steel or Aluminium on demand with transparent lid •Cluster : Plastic cluster, SS nipple case •Pulsator : 2 pcs. 60/40 pneumatic pulsators • Chasis : Galvanised, electrostatic painted steel •Vacuum tank : Galvanised, electrostatic painted steel •Weight : 63 kg.
•Vacuum : Direct coupled to motor, 200 lt/min capacity, dry/oily type vacuum pump •Motor : 0.55 kW (0.75 HP), 50 Hz, 1425 rpm, 220 V, monophase •Bucket volume : 30 lt each. •Bucket material : AISI 304 Stainless steel or Aluminium on demand with transparent lid •Cluster : Plastic cluster, SS nipple case •Pulsator : 2 pc. 60/40 pneumatic pulsator •Chasis : Galvanised, electrostatic painted steel •Vacuum tank : Galvanised, electrostatic painted steel • Weight : 70 kg.
•Vacuum : Direct coupled to motor, 180 lt/min capacity, dry/oily type vacuum pump •Motor : 0.55 kW (0.75 HP), 50 Hz, 1425 rpm, 220 V, monophase •Bucket volume : 40 lt. •Bucket material : AISI 304 Stainless steel or Aluminium on demand with transparent lid •Cluster : Plastic cluster, SS nipple case •Pulsator : 1 pc. 60/40 pneumatic pulsator •Chasis : Galvanised, electrostatic painted steel •Vacuum tank : Galvanised, electrostatic painted steel •Weight : 65 kg.
1-Automatic and manual adjustable roll space and reducer control 2-Hinged, covers which can be opened. 3-Cover Lock whiich can be opened 4-Independent feeding cylinders 5-Rolls mechanism and quick roll replacement 6-Rolls pulleys driven by belts. 7-Product ,inlet level control 8-Integrated control system (touchscreen panel) 9-Control of the product flowing through Rolls (option) 10-Thermocouple plc module (option) 11-Rotation speed control of feeding cylinders (option) 12-Rotation speed control of rolls (option).
