Pet coke from refineries in Kazaskhstan
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%
FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm
Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high
We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.
Petcoke, coque de petroleo
PETROLEUM COKE Maximum Quantity: 50,000MT per Month CIF Price: USD $200.00MT/USD $190.00 NET on CIF TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.
Petroleum coke (petcoke) is a byproduct of the oil refining process. As refineries worldwide seek to operate more efficiently and extract more gasoline and other high value fuels from each barrel of crude oil, a solid carbon material known as petcoke is produced. We work with the rafineries, we have differents specs, contact us for our service.
Hello, we now have an agreement with the refinery to work with good FOB market prices for Petcoke. We are interested in receiving customer proposals to negotiate with the refinery, price proposals on a reasonable market. The refinery is open to negotiations, if you are interested, you can make us a serious proposal with an LOI and directly to the buyer. Quantities: 45k to 200k monthly. What price would you buy FOB? We do not sell CIF. They are two types of Petcoke, please find the attached specifications.
ORIGIN - RUSSIA MOQ 50.000 MT PER SHIPMENT MAXIMUM QUANTITY - 200,000 MT PER SHIPMENT PACKING BULK CIF PRICE 92 USD GROSS PER MT PAYMENT TERMS - 1. SWIFT MT710 VIA USANCE LC 2.SWIFT MT199 FOLLOW BY SWIFT MT760 SBLC 3.SWIFT MT103 TT 2% PB
BF Coke 60-90 mm: a. Material BF Coke 60-90 mm, Czech origin; b. Quantity 4000 MT +/- 10% (for shipping tolerance) (500-800 MT PER SHIPMENT) c. Quality, as per ISO (load port analysis): Moisture (as received): 10 % max; Ash (dry basis): 10,5 % max; Sulphur (dry basis): 0,65 % max; VM (dry basis): 0,7 % max; M40 78% min; M10 10% max; Calorific value (dry basis) 27 000 kJ/kg min; Undersize (less 60 mm): 10% max. d. Delivery terms: CIF/CFR e. Payment terms: LC, at sight e. Price: for further estimation
Product Origin: Russia Commodity: Pet Coke Trial: 50,000 MT Contract: 50,000 MT for 12 Months CIF Price Target: $80.00 Per MT Delivery Port: China Inspection: SGS Payment Terms: DLC (MT700), TT Wiring (MT103) Commissions: $5 / $5 Buyer's Bank in accordance with Seller's verbiage issue SBLC(MT760) or DLC(MT700) within 7 working days for first shipping's value to seller's financial bank to enable seller commence loading of product with the shipping company and release full set of PPOP documents after loading via bank to bank swift .
Date September 20/2019 Valid till September,/2019 SOFT CORPORATE OFFER Russia Origin Commodity: Pet Coke Trial: 50,000 MT Contract: 50,000 MT for 12 Months CIF Price: $80 Per MT Delivery Port: China Inspection: SGS Payment Terms: DLC (M700), TT Wiring, MT103 Commission: $5 / $5 Mr/ Ajoy ,Pls Lets have the ICPO from Buyer and Seller will indicate specifications on the ICPO . CONTRACT BANKING TRANSACTION(CIF) 1. Buyer accepts Seller's procedure and issues ICPO with the following: a)banking details, b)company profile, C)passport copy d)Acceptance letter stating to adhere to seller's procedure 2. Seller acknowledges buyer's ICPO and issues contract to buyer open for amendment, buyer signs SPA and return the contract to the seller in word format within 4 working international days a. Commitment letter to supply b.Authority to Verify c.Commercial Invoice d.Profoma Invoice 4.Buyer's Bank in accordance with Seller's verbiage issue SBLC(MT760) or DLC(MT700) within 7 working days for first shipping's value to seller's financial bank to enable seller commence loading of product with the shipping company and release full set of PPOP documents after loading via bank to bank swift within 7 working days or in alternative buyer pays $350,000 via TT wiring as a guarantee performance within 72hours if buyers bank fails to issue SBLC(MT760) or DLC(MT700) with 7 workings which will be deducted from the final face value when the final payment is made 5.Seller's bank issues operative 2% PB in favor of buyer's bank account within 3 working days,which is submitted and detailed in the mutually agreed signed contract 6. Upon Seller's bank successful exchange of instrument method with buyer's bank in which the buyer's bank must have must finished issuance of the SBLC(MT760) or DLC(MT700) to the as given below: A. Certificate of Incorporation B. Seller Certificate/Registration C. Certificate of Origin D. Company Tax payer certificate E. Fresh SGS report F. Tank receipt G.Q88 and quality specification H. Bill of loading I.Passport Product J.Export License issued by the Russia of Ministry 7. Buyer notifies seller by official written notice of his bank receiving seller's PPOP document
Petroleum Coke
Blast-furnace coke fraction 25-60-90mm. Coke nut fraction of 10-25mm. Coke fines fraction 0-10mm. In bulk
