Planer
Plate dimensions400 x 2300 mm
Front plate length 1110 mm
Rear license plate size 1110 mm
Max. Planing length 18 mm
Trench slope angle0-45
Blade qty 4
Top spindle speed 4000 rev / min
Top shaft diameter 105 mm
Saw tray
Plate dimensions 550 x 800 mm
Circular saw blade diameter 350-400 mm
Shaft diameter 30 mm
Tray spindle speed 3600
Drill
Plate dimensions 270 x 480 mm
Longitudinal motion 170 mm
Transversely action 135 mm
Vertical movement 160 mm
Drill diameter 20 mm
Machine
Motor force 4 hp
Dead weight 850 kg.
e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.
The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.
Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.
Sliding table saw
Technical data
Fixed table size mm 1580-800
Fixed table size cut mm 1280
Fixed table from floor mm 850
Carriage diemension mm 680
Lateral table saw mm 1150
Vlade arbor diameter mm 30
Max. Depth of cut mm 250
Blade tilting 45'-90'
Max. Depth of cut mm 65
Motor power hp 4
Motor speed rpm 1500-3000
Blade speed rpm 3000-6000
-> Speed Conveyors are controlled wood Carrier (size 130 x 60 cm)
Fhgkkx9sw
-> Adjustable Height Blade (the desired wood shaving thickness can be adjusted)
-> Wood Carrier is Konvi Speed Controls (wood shaving Size is set at the desired figure)
-> Machinery Spare Parts is our standard production can be obtained from anywhere.
-> blower fan
-> Can be used for horse or chicken.
Technicial Specifications
Model : 4 YT - 60
Number of Rollers : 4
Blade Length : 60 cm
Number of Blades : 7 x 4 = 28
Motor Powers : 4 * 7,5 KW = 30 KW -
Total Engine Power : 33 KW
Cutting Setting : 0.5 mm - 2 mm
Machine Weight : 2400 KG
Production Capacity : 900-1250 kg / h
380V- 50 HZ
Drying complex or drying chamber (dryer for firewood, wood dryer) is designed for quick drying of technical wood or fuelwood (firewood with a moisture content
