Model: cac(5) Light sources:d65, cwf, tl84, uv, f Voltage:220v/50hz or 115v/60hz Dimensions:712x405x570mm Cavity:680wx380dx360h G.W.:30kg D65 --- international-standard artificial daylight Color temperature:6500k power:20w Tl84 --- applicable to stores in europe, japan and china Color temperature:4000k power:18w Cwf (cool white fluorescent) Color temperature:4150k power:20w F-light ---- comparison referential light source, applicable to family/hotel Color temperature:2700k power:40w Uv ---- ultraviolet light source Wavelength:365nm power:20w Features: > time running display of each light source. > auto conversion between light sources; different spectrum with same color. > no need warm-up; no flicker; color assessment quick and reliable. > low power-consumption; no heat emission; efficient illumination. > small and convenient. > low price with high quality assurance. Various types available! Standard packaging
UV Flame sensor is fire detect sensor which detecs ultraviolet rays of a flame instantly and output warning signal outside. By using emergency call equipment or adjusting the sensor connection, SKH-)$& can supervise multiple sensors at a long range.
Typical vehicle detection application using magnetic sensor and earth' field are: replace loop sensor. The VDS100 has been specifically designed and engineered for use in the demanding Traffic control industry. With standard operations including: 2 Channel input ports, 2 channel ouput ports and selectable presence time options(1~60 sec)
1 Description:WSS007 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS007 3 Antenna Profile:197 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:Customization Connector:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or Customization
1 Description WSS002 Dual Band Antenna with RP-SMA(M) 2 Model No.:WSS002 3 Antenna Profile:108.5 mm 4 Color:Black 5 Electrical Characteristic Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band Antenna Type:Dipole Polarization Type:Linear Type of Radiation:Toroidal Peak Gain:2.0 dBi Typical Impedance:50 Ohm nominal VWSR:2.0:1 Max 6 Mechanical Characteristics Action:Swivel Type Lead Length:RP-SMA(M) Core:N/A 7 Raw Material Coaxial Cable:RG-178 Housing:TPU Hinge:PC+ALLOY PE bag or customization
Humidity sensor, as an important chemical sensor, which is widely used in fields of warehousing, industry production, and process control, environmental monitoring, home appliances and meteorology etc. inner: plastic foam outside: carton
Detection gas CO Measurement Range 0~1000ppm Max detecting concentration 2000ppm Sensitivity (3~12)nA/ppm Resolution ratio 1ppm Response time(T90) 30S Load resistance(recommend) 1000 Repeatability
Items Technical parameter Detection Range a1000ppm Max detecting bound 2000ppm Detecting life 5 years Sensitivity 0.015 Resolution 0.5ppm Temperature range Pressure range Normal atmosphere Response time(T90)
Model No. RD-622 Standard Encapsulation: TO-5 Infrared receiving Electrode 1mm, 2 sensitive elements Window Size: 4mm Receiving Wavelength: 7-14 Transmittance >75% Output signal peak[Vp-p] 3500mV Sensitivity 3200V/W Detection Rate (D*): 1.4 108 cmHz1/2/W Noise peak[Vp-p]:
Application Humidity sensor, as an important chemical sensor, which is widely used in fields of warehousing, industry production, and process control, environmental monitoring, home appliances and meteorology etc. inner: plastic foam outside: carton
M-ELL-SA External level switch is a non-contact level switch by using the Variable frequency ultrasonic technology, it is widely applied to all kinds of liquid level detection. The measuring probe is installed on the external wall of the container. And it belongs to a completely non-contact instrument which measure the level from outside of tank. Working Principles of the External Level Switch The measuring probe of the instrument can send the ultrasonic and detect the residual vibration signal in the wall of the container. The amplitude of the residual vibration signal will becomes smaller when the liquid is over the probe. A switch signal will be outputted after such change is detected by the instrument. The Variable Frequency Ultrasonic Technology is invented by the DingHua and it is the world¡¯s leading ultrasonic signal change detection technology. The main problem for the traditional ultrasonic level switch is that the ultrasonic signal can be interfered by the attachments from the tank wall and the amplitude of residual vibration signal can be changed by the drift of the temperature and time, thus the misinformation phenomenon is easy to appear. More owned the patent of self adaptive ultrasonic technology of variable amplitude variable frequency and it can effectively eliminate the interference and drift to test the changes of the signal correctly. So that it can be applied to a variety of complex site conditions, stable and reliable long-term work. This product adopts the "micro vibration analysis" external sonar signal processing technology and leading manufacturing process, and ensure the reliability and durability of ELL-SA external variable frequency ultrasonic level switch. Application There is no need to open a hole on the tank wall to install the sensors when the ELL-SA series external level switch is installed. The instrument neither contact the liquid medium nor contact the gaseous medium in the container. Therefore, the installation is simple and quick, safe and secure. No need to clear the tank while repair and maintenance, no influence on the normal operating. ELL-SA series external level switch is applicable to fixed-point liquid level measuring and alarm of all kinds of containers and liquid. It can be widely used in petrochemical, chemical, oil depots, oil, electricity, liquid storage, pharmaceutical and other industries. And it has a significant advantage in the pressure vessel, dangerous chemical liquids, flammable and combustible liquids and fixed-point liquid level measuring and alarm fields. Product features 1¡¢Safety: the valves, communicating pipes, joints are not used in the measurement of poisonous, corrosion, pressure, easy to bums, volatile and leak liquid, and there is no leaks, no contact with the liquid and gas in the container, which is very safe. Even under the condition of instrument damage or repair, there will be no possibility for leakage, poisoning and explosion. (Measuring principle diagram) 2¡¢Easy installation and maintenance: There is no need for tank cleaning and open fire during the installation, no impact on production 3¡¢Durability and reliability: There is no mechanical moving parts in the sensor and instrument, strict sealing, isolation, will not wear or corrode. 4¡¢Widely applicable: It has nothing to do with the medium pressure, temperature, density, dielectric constant, viscosity, and presence of corrosion. carton box and gift box, according to requirement
Consistent control is available by always maintaining the standard time in application of GPS receipt for compensating the present time to the electronic Guard Lamp switch, and this product does not require a separate compensation because the light On/Off time according to the region is compensated automatically.
A product for subdivided control by sunrise/ sunset and twilight time by the time IC embedded programmed CPU.
Consistent control is available by always maintaining the standard time in application of GPS receipt for compensating the present time to the electronic Guard Lamp switch, and this product does not require a separate compensation because the light On/Off time according to the region is compensated automatically.
Weight Measurement Function: By Hours, minutes and seconds unit, Display the status of the usage of liquid gas and it can be used being installed on storage tank or tank lorry and can be carried as a portable measuring instrument. PC Monitoring Function: As the remained liquid goes below 10% of its capacity, it automatically alarms to supplement liquid gas. Thus, the appropriate time for supplement of liquid gas can be decided on time. Alarm Function: the liquid remaining of the storage tank is less than 10%, The alarm sound provides information that you can setting the a liquid supply time. Diversity Of Power Supply: Use the usual 220volt electric, in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery. Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by the output as a receipt.
A product for subdivided control by sunrise/ sunset and twilight time by the time IC embedded programmed CPU.
Model no.:cwst-247 Easy to install Connector is changeable Specification Frequency: 824-960/1710-1990mhz Impedance: 50 ohm Gain: 0-3dbi Vswr: less than 6.0:1 Polarization: toroidal Radiation: vertical Connector: sma r/a Antenna color: black Antenna length: 53.5mm
Residential Diaphragm Gas Meter ITRON (MID approved) Steel Version Basic Features 3 Compact size: 1.2 dm cyclic volume Range: G1.6, G2.5, G4 EN 1359 & O.I.M.L compliance Design Long -term accuracy & safety Ready for remote reading & data management Quality World-class, ISO9001 certified, European Engineering and Manufacturing APPLICATION The ITRON, with an installed base of over 30 million units, is a versatile meter that makes it the preferred choice of many large utilities world-wide. METROLOGY The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by the LNE), and more than 25 national metrological standards (DVGW,NMI Class 1....). Its design and the careful choice of materials enable the ITRON to meet the highest demand in international markets in terms of accuracy and long-term stability. During the preliminary test controls on the sonic nozzle test benches, all meters are tested at Qmin, 0.2 Qmax and Qmax. OPERATING PRINCIPLE The ITRON is a positive displacement diaphragm gas meter with a stand-alone twin chamber measuring unit. The twin chambers are each fitted with a flexible and gas-tight diaphragm which is moved by the differential between the inlet and outlet pressure. The Gas enters one side of the diaphragm pan while on the other side it comes out through a separate port on the valve. When one side is full, the rotating mono-valve moves on to the next position, allowing the gas to fill the empty side. A transmission gear and a mechanical coupling or stuffing box transfer the reciprocating motion to the mechanical retrofitable index. The measuring unit is housed in a robust gas-tight casing. CONSTRUCTION With its casing in steel, high protection against corrosion is ensured by 500 hours salt fog spray test resistant cataphoresis treatment. The aluminum version can withstand up to 1000 hours salt fog spray test. The extreme strength of the case joint is achieved by rolling the belt & compressing the flanges into contact with a sealant applied between the faces. This forms a joint which is both gas-tight and fire- resistant. MEASURING UNIT The achievement of the fixed stroke mechanism is the result of precision and high quality automation, and eliminates the need for an adjustable tangent. This confines all registration adjustments to the accessible change wheels behind the index. The long life synthetic diaphragms, coupled to the well-proven movement design, combine to give excellent stability and accuracy during the whole life of the metre. All materials have been selected for their superior resistance to chemicals and gas. The valve and the grid, thanks to a special Bakelite formulation, enjoy high gliding properties and are protected against premature wear. Finally, a back-run stop prevents the metre from running backwards in case of tampering. INDEX The metres are available with metric or cubic inch indexes. They come with a permanent magnet for pulse generation and can be retrofitted with a pulse transmitter. Ip54 and Ip67 versions are available for specific environments. QUALITY ASSURANCE Quality assurance procedures- such as ISO 9001- and strict controls throughout the manufacturing process ensure a very high quality level. APPLICATION The ITRON, with an installed base of over 30 million units, is a versatile meter that makes it the preferred choice of many large utilities world-wide. METROLOGY The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by the LNE), and more than 25 national metrological standards (DVGW,NMI Class 1....). Its design and the careful choice of materials enable the ITRON to meet the highest demand in international markets in terms of accuracy and long-term stability. During the preliminary test controls on the sonic nozzle test benches, all meters are tested at Qmin, 0.2 Qmax and Qmax. OPERATING PRINCIPLE The ITRON is a positive displacement diaphragm gas meter with a stand-alone twin chamber measuring unit. The twin chambers are each fitted with a flexible and gas-tight diaphragm which is moved by the differential between the inlet and outlet pressure. The Gas enters one side of the diaphragm pan while on the other side it comes out through a separate port on the valve. When one side is full, the rotating mono-valve moves on to the next position, allowing the gas to fill the empty side. A transmission gear and a mechanical coupling or stuffing box transfer the reciprocating motion to the mechanical retrofitable index. The measuring unit is housed in a robust gas-tight casing. CONSTRUCTION With its casing in steel, high protection against corrosion is ensured by 500 hours salt fog spray test resistant cataphoresis treatment. The aluminum version can withstand up to 1000 hours salt fog spray test. The extreme strength of the case joint is achieved by rolling the belt & compressing the flanges into contact with a sealant applied between the faces. This forms a joint which is both gas-tight and fire- resistant. MEASURING UNIT The achievement of the fixed stroke mechanism is the result of precision and high quality automation, and eliminates the need for an adjustable tangent. This confines all registration adjustments to the accessible change wheels behind the index. The long life synthetic diaphragms, coupled to the well-proven movement design, combine to give excellent stability and accuracy during the whole life of the metre. All materials have been selected for their superior resistance to chemicals and gas. The valve and the grid, thanks to a special Bakelite formulation, enjoy high gliding properties and are protected against premature wear. Finally, a back-run stop prevents the metre from running backwards in case of tampering. INDEX The metres are available with metric or cubic inch indexes. They come with a permanent magnet for pulse generation and can be retrofitted with a pulse transmitter. Ip54 and Ip67 versions are available for specific environments. QUALITY ASSURANCE Quality assurance procedures- such as ISO 9001- and strict controls throughout the manufacturing process ensure a very high quality level. Prepaid Gas Meter Sensus Meters satndars
Scrap electric motor for metals reclamation. Motors are segregated; small motors, mixed motors, large motors 40' teu per lot. Loaded loose.
Part NO DC current AC Voltage Resistance DC Voltage FC- 380 2.5m/25m/200m/20 20/50/250/1000V 1/10/100/1K/10k 0.1/0.5/2.5/10/50/250/1000V FC-2010 2m/20/200m/10A 200/600V 200/2000/20k/200k/2M/20M 200m/2/20/200/600V FC-838 2000u/20m/200m/10A 200/750V 200/2000/20k/2000k 200m/2000m/20/200/1000V FC-830L 2m/20m/200m/10A 200/600V 200/2000/20k/200k/2000k 200m/2/20/200/600V