Zirconia o2 sensors Probe series - long housing Features * zirconium dioxide (zro2) sensing elements * long life, non-depleting technology * integral heating element * high accuracy * requires an external interface board to operate Benefits * no reference gas required * no need for temperature stabilisation * two lengths available; 220mm and 400mm Technical specifications Heater voltage Operating: 4v dc ± 0.1v dc (1.7a) Standby: 1.65v dc (0.7a) Pump impedance at 700'c: < 6k Permissible gas temperature Standard temperature: -100'c to +250'c High temperature: -100'c to +400'c Gas flow rate: 0 - 10 m/s Repetitive permissible acceleration: 5g Incidental permissible acceleration: 30g Output values Oxygen pressure range: 2mbar - 3bar max Accuracy: 5 mbar max Internal operational temperature: 700'c Response time (10 - 90% step): < 15s Warm up time (prior to sensor operation): 100s Warm up time (from stand by): 20s Output stabilisation time: ~ 180s
Zirconia o2 sensors Flange mounted series The flange mount zirconium dioxide oxygen sensor is designed for easy sealing into a manifold or sampling chamber. Favoured by ssts aerospace customers and in applications that require high temperature and pressure operation. O2s-fr-t4-4p flange zirconia o2 sensors features Zirconium dioxide (zro2) sensing elements Long life, non-depleting technology Integral heating element High accuracy Requires an external interface board to operate O2s-fr-t4-4p flange zirconia o2 sensors benefits No reference gas required No need for temperature stabilisation Flange mounting O2s-fr-t4-4p flange zirconia o2 sensors technical specifications Heater voltage Operating: 4.35vdc ± 0.1vdc (1.85a) Standby: 2vdc (0.85a) Pump impedance at 700'c: < 6k Permissible gas temperature: -100'c to +400'c Gas flow rate: 0 - 10 m/s Repetitive permissible acceleration : 5g Incidental permissible acceleration: 30g O2s-fr-t4-4p flange zirconia o2 sensors output values Oxygen pressure range: 2mbar - 3bar max Accuracy: 5mbar max Internal operational temp: 700'c Response time (10 - 90% step): < 4s Warm up time (prior to sensor operation): 60s Warm up time (from standby): 20s Output stabilisation time: ~ 180s
Air flow 2 sensor (no) rma-af2-sen overview Air flow 2 sensor (no) provides real-time recognition of air flow stoppage. This air flow sensor is normally open and includes a mounting clip and clamp. Typical use is to monitor continuous air flow in an hvac duct, under a raised floor, or near a fan on a rack cabinet or important server. This is an instant 'plug & play' sensor via one of the switch sensor channels on the back of any compatible room alert id box. Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable. This air flow sensor switch is equivalent to the discontinued stego air flow sensor #01300.1 Air flow 2 sensor (no) rma-af2-sen features & specification Environment condition monitored: air flow Real-time recognition: air flow stop/start (normally open) Power supply: monitoring unit Sensor cable type: 2 wire sensor cable Sensor cable length: 25' Maximum sensor cable length: approximately 900' Compatible products: room alert 32w, 32e, 26w, 26wo, 24e, 12e, 11e, 7e, 4e, 3e & 3 wi-fi
Fiber optic pressure sensor fop-miv description The fop-miv has been especially designed and tested to fulfill the highest of medical performance requirements. Its applications range from human body fluid pressure measurements, for intervention in hospital critical care units, to animal testing in high emi environments. It is available off the shelf for standard applications or it can be customized to suit oem-specific applications Fiber optic pressure sensor fop-miv features: Em/rf/mw interference complete immunity Miniature and rugged sensor for pressure measurements High performance and reliability High accuracy and repeatability Very low drift and thermal shift Fast response time Sterilizable Fiber optic pressure sensor fop-miv applications: Custom design for embedmentin diagnostic or therapeutic medical devices, automated manufacturing, high volume, low cost available sensors, computerized product testing in assembly line Cardiology, neurology, anaesthesiology, pneumonology, gastroenterology, urology, gynecology, ophthalmology, electrosurgery, thermal therapy, preclinical studies, mri and other rfi environments Medical: Fiber optic pressure sensor fop-miv oem products: Custom design for embedmentin diagnostic or therapeutic medical devices, automated manufacturing, high volume, low cost available sensors, computerized product testing in assembly line
Fop-mh high-temperature pressure sensor fiber optic pressure sensor description The fop-mh is a fiber optic pressure sensor designed mainly for applications where extreme temperature conditions can be found such as aerospace and defense. It is also a useful tool for general industrial applications in harsh and hazardous environments. Fiber optic pressure sensor fop-mh key features: Designed to operate in extreme temperature conditions, where standard sensors fail Operating temperature up to 450'c (842'f) Intrinsically safe Immune to emi/rfi Fiber optic pressure sensor fop-mh applications: Aerospace Defense Metallurgy Industrial in-situ process monitoring High temperature steam Harsh and hazardous environments High temperature environments Oil well and natural gas pumping station Plastic injection molding and extrusion monitoring Food packaging Fiber optic pressure sensor fop-mh specifications: Pressure range: 0-150 psi, 0-1000psi, 0-3000psi, 10-50psi Resolution: 0.1% of full scale Accuracy: â±1% of full scale Connector type: st connector Operating temperature: -20'c to 450'c (-4'f to 842'f)
Fiber optic linear position and displacement sensor fod description The fod is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement. The fod is well suited for difficult to reach locations and hazardous environments such as those containing explosive materials. Fiber optic linear position and displacement sensor fod specifications 1) linear stroke : 20 mm (0.8 in) 2) resolution: 0.002 mm (0.00008 in) 3) accuracy: â±0.02 mm (0.0008 in) 4) connector type: st connector 5) operating temperature : -20'c to 170'c ( -4'f to 338'f) Fiber optic linear position and displacement sensor fod features: Intrinsically safe Immune to emi/rfi Up to 170'c (338'f) Resolution of up to 0.002 mm 20 mm linear stroke Aluminum or composite material housing Fiber optic linear position and displacement sensor fod applications: Microwave and rf environments In-situ process monitoring Harsh and hazardous environments High-temperature environments
Inline ndir h4 sensor general harateristis Measurment range 0-4.4 vol.-% (100%ueg) Temperature and pressure ompensated Integrated temperature measurement Rs485 interfae 4-20ma interfae Inline ndir h4 sensor speifiation Measuring gas: h4 Measurement range: 0 - 4.4 vol.-% (0 - 100%ueg) Resolution: 300ppm Auray: < 2% of the measured value Response time: < 10s Heat up time: < 10min Storage temperature: -20 - +85 Operating temperature: -20 - +65 Operating humidity range sensor: 0 - 99% (not ondensated) Operating humidity range eletronis: 0 - 85% (not ondensated) Interfae: rs485 Analogue output: 4 - 20ma Supply voltage: 10 - 36vd Power onsumption: < 2w Long-term stability: < 5% of the measured value per 1 year
Air flow 1 sensor (nc) rma-af1-sen overview Air flow 1 sensor (nc) provides real-time recognition of air flow stoppage. This air movement sensor is normally closed and includes a mounting clip and clamp. Typical use is for measuring air flow in an hvac duct, under a raised floor, or near a fan on a rack cabinet or important server. This is an instant 'plug & play' sensor via one of the switch sensor channels on the back of any compatible room alert id box. Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable. This sensor is equivalent to the discontinued stego air flow sensor #01300.0. Air flow 1 sensor (nc) rma-af1-sen features & specification Environment condition monitored: air flow Real-time recognition: air flow stop/start (normally closed) Power supply: monitoring unit Sensor cable type: 2 wire sensor cable Sensor cable length: 25' Maximum sensor: cable length approximately 900' Compatible products: room alert 32w, 32e, 26w, 26wo, 24e, 12e, 11e, 7e, 4e, 3e & 3 wi-fi
Zirconia o2 sensors Miniature series The miniature zirconium dioxide oxygen sensors can be pcb mounted and are used when measuring ambient gas with the complete sensor immersed in the atmosphere which is to be measured. Features * zirconium dioxide (zro2 ) sensing elements * long life, non-depleting technology * integral heating element * high accuracy * requires an external interface board to operate Benefits * no reference gas required * no need for temperature stabilisation * pcb mountable Technical specifications Heater voltage Standard response sensor: 4v dc â± 0.1v dc (1.7a) Standby: 1.65v dc (0.7a) Fast response sensor: 4.35v dc â± 0.1v dc (1.85a) Standby: 2v dc (0.85a) Pump impedance at 700'c: < 6k Permissible gas temperature: -100'c to +250'c Gas flow rate : 0 - 10 m/s Repetitive permissible acceleration: 5g Incidental permissible acceleration: 30g Output values Oxygen pressure range: 2mbar - 3bar max Accuracy: 5mbar max Internal operational temperature: 700'c Response time (10 - 90% step) Standard response sensor:
Pressure sensor module ms5803-14ba description: The pressure sensor module ms5803-14ba is a new generation of high resolution pressure sensors with spi and i2c bus interface. It is optimized for depth measurement systems with a water depth resolution of 1cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit î?î£ adc with internal factory calibrated coefficients. It provides a precise digital 24 bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor. The ms5803-14ba can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap protects against 30 bar overpressure waterproof. This new sensor module generation is based on leading mems technology and latest benefits from the intersemaâ??s proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal. Pressure sensor module ms5803-14ba features: * high resolution 0.2 mbar * fast conversion down to 1 ms * low power, 1ua (standby < 0.15 ua) * integrated digital pressure sensor * supply voltage 1.8 to 3.6 v * operating range: 0 to 14 bar, -40 to +85 'c * i2c and spi (mode 0, 3) * no external components (internal oscillator) * excellent long term stability * hermetically sealable for outdoor devices Pressure sensor module ms5803-14ba applications: * mobile water depth measurement systems * diving computers * adventure or multi-mode watches
Dust sensor module dsm501b description Dust sensor module: dsm501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or iaq monitor. Pwm output of the sensor can be directly connected to î¼-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 um, and the application for smoke or fire alarm is prohibited. Dust sensor module dsm501b type: Dsm501a : 2mm pitch connector type (20010wr-05). Dsm501b : 2.5mm pitch connector type (s5b-eh). Dust sensor module dsm501b electrical characteristics: Supply voltage: dc510% Power consumption: 90ma Operating temperature range: -10~ +65'c Operating humidity range: 95%rh or less (without dew condensation) Recommend storage condition: -20 ~ +80'c Dimension: w59 * h45 * d20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 - 1.4mg/m3 Output signal: pwm (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: to be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust sensor module dsm501b features: * pwm output * easy installation * single power supply * compact size and lightweight Dust sensor module dsm501b application: * ventilator etc * air conditioner * air quality monitor * air cleaner or air purifier
Properties of the sic uv photodetector tocon-abc1 * broadband sic based uv photodetector in to5 housing with concentrator lens cap * 0 - 5 v voltage output * peak wavelength at 280 nm * max. Radiation (saturation limit) at peak is 18 nw/cm2, minimum radiation (resolution limit) is 1.8 pw/cm2 * applications: very low uv radiation, flame detection Specifications Typical responsivity at peak wavelength: 280 mv/nw/cm2 Wavelength of max. Spectral responsivity: 280 nm Responsivity range (s=0.1*smax): 221 - 358 nm Supply voltage: 2.5 - 5 v Dark offset voltage: 700 uv Temperature coefficient at peak: < -0.3 %/k Current consumption: 150 Bandwidth (-3 db): 15 hz Risetime (10-90%): 0.182 s Operating temperature: -25 - +85'c Storage temperature: -40 - +100'c Soldering temperature (3s): 300'c
Digital relative humidity and temperature sensor htu20d description Htu20d(f), is a new digital humidity sensor with temperature output of meas. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable dual flat no leads (dfn) package with a small 3 x 3 x 0.9 mm foot print. This sensor provides calibrated, linearized signals in digital, i2c format. Htu20d(f) digital humidity sensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensor are designed for high volume and cost sensitive applications with tight space constraints. Digital relative humidity and temperature sensor htu20d features * full interchangeability with no calibration required in standard conditions * instantaneous desaturation after long periods in saturation phase * compatible with automatized assembly processes, including pb free and reflow processes * individual marking for compliance to stringent traceability requirements Digital relative humidity and temperature sensor htu20d applications * home appliance * medical * printers * humidifier * multimedia: smartphone, tablet,
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Summary NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. Based on GSS patented solid state IR sensor technology and innovative optical designs, MISIR is configured to meet the requirements of the HVAC and Demand Led Ventilation markets. Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Characteristic * Low Power 20mW * Measurement ranges from 0 to 1% * Low noise measurement
Low power carbon dioxide sensor nrid co2 gas sensor cozir-a description Cozir is an ultra low power (3.5mw), high performance co2 sensor, ideally suited for battery operation and portable instruments. Based on patented ir led and detector technology and innovative optical designs, cozir is the lowest power ndir sensor available. Optional temperature and humidity sensing are available. Cozir is a third generation product from gas sensing solutions ltd ? leaders in ir led co2 sensing. With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the cozir ambient sensor is suitable for applications such as building control and horticulture. * ultra-low power 3.5mw * measurement ranges from 0 to 1% * low noise measurement
Ac/ dc operated carbon monoxide (co) alarm Vst-c598ih Carbon monoxide (co) alarm vst-c598ih features and benefits * ac/dc operated carbon monoxide alarm * non-radioactive technology for environmental friendly * co concentration threshold: Varying time-to-alarm depending on concentration * with quick fix mounting bracket for easy installation and simple ac connector for easy installation * fitting and battery tamper resist feature * inter-connectable up to 40 co, heat and/or smoke alarms * 3 color led indicator (fault and alarm and ac power indicator) * low-battery and battery missing warning indicator * hush/test button * auto-reset when co clears * ce approved, comply with en50291-1:2010
Fiber Optic Pressure Sensor FOP-M description The FOP-M is a fiber optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense.It is also a useful tool for general industrial applications in harsh and hazardous environments Fiber Optic Pressure Sensor FOP-M Specification: Pressure range: 0-5, 0-50, 0-150 and 0-1,000psi Resolution:
Luminox ppm fluorescence o2 sensors features * fluorescenceâ??based optical technology * contains no hazardous materials; rohs & reach compliant * factory calibrated * high accuracy * maintenance free * long life, non-depleting technology - can be stored in any oxygen % Luminox ppm fluorescence o2 sensors benefits * low power, long life due to non-depleting sensing principle * compact footprint Luminox ppm fluorescence o2 sensors technical specifications Supply voltage (vs) : 8-30v dc Supply current (ls) :
Sic uv photodiode sg01m-5lens Concentrator lens sic based uv photodiode avirtual = 11.0 mm2 Properties of the sg01m-5lens sic uv photodiode * broadband uva+uvb+uvc, ptb reported high chip stability, for very weak radiation * radiation sensitive area a = 11.0 mm2 * to5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin * 10âµw/cm2 peak radiation results a current of approx. 140 na Specifications Typical responsivity at peak wavelength: 0.130/aw Wavelength of max. Spectral responsivity: 280 nm Responsivity range (s=0.1*smax): 221 - 358 nm Sensitive area (chip size = 0.20 mm2): 11.0 mm2 Dark current (1v reverse bias): 0.7 fa Capacitance: 50 pf Short circuit (10uw/cm2 at peak): 140 na Temperature coefficient: < 0.1 %/k Operating temperature: -55 - +170 'c Storage temperature: -55 - +170 'c Soldering temperature (3s): 260 'c Reverse voltage: 20 v
High speed carbon dioxide sensor ndir co2 sensor sprintir summary Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation. Fast, accurate carbon dioxide sensor The sprintir carbon dioxide sensor is the fastest, most accurate co2 sensor on the market. A breakthrough in ndir technology, the sprintir uses advanced solid state indium antimonide ledâ??s and detectors to offer a robust sensor with no moving parts, no heated filaments, and incredibly low power requirements. The sensor comes in four versions - from 0% to 100% - all capable of the same high-speed co2 measurement. This makes the sprintir especially useful in biological applications. * high speed sensing (20hz) * measurement ranges from 0 to 100% * 3.3v supply * low power requirement 35mw * flow through adaptor (optional) High speed carbon dioxide sensor ndir co2 sensor sprintir specifications Measurement range: 0-5%, 0-20%, 0-60%, 0-100% Accuracy: â±70 ppm +/- 5% of reading Measurement noise:
