1. Ruida control system and USB interface. Easy to operate.
2. Reci laser tube. Stable light and long service life.
3. Humanized design, front and rear entry for super-long plate to pass through, for example, 1300 x unlimited mm(standard: 1300*900).
4. All transparent acrylic cover, you can see machine working clearly.
5. Red cross position system. Can see the working point and increase the precision.
6. American 26 Mirrors: High light transmittance, stable spot.
7. ABBA square rail. High speed and precision, high load capacity and rigidity.
8. Exhaust fan removes dust and smoke to protect the optical parts and the users.
9. Water chiller: cooling the laser tube, Better than water pump
10. Galvanized sheet machine frame which is damp-proof and anti-rust.
11. LED lighting, can working in the dark environment.
12. Waste collect device, easy to pick upsamples and save raw materials.
13. Safety magnetic switch to make sure safety during work.
14 Most advanced double limit switches protect on XYZ axis, preventing the bump of laser parts.
Features:
1. This equipment proves most effective when used together with stone slicing machine.
2. Technical data for long stone cutting:
max. diameter of blade-1200mm;
max. number of blades used-5pcs;
max. cutting height-450mm.
3. Cast iron is adopted in main frame of the machine to make the machine more stable with less chance of vibration under the operating condition.
4. The machine operates automatically through the main control unit consisting of frequency converter, transformer, AC contactor and time relay, which can more effectively control vertical movement of oil cylinder, trolley operation and slab cutting efficiency.
5. Unlike traditional stone cutting, it dram atically increases the productivity and reduce labor cost and power consumption and it consumes less diamond segment per cubic meter of production compared to the traditional cutting machine.
Technical Data:
Dimension: 5500*2800*2700mm
diameter of blade:1200mm
number of blades:5pcs
Workbench/Table size:2500*1800mm
Working stroke:2500mm
Max. vertical stroke:600mm
Weight:10t
Max. cutting depth:450mm
Main motor power:22*3kw
Widely applicable to metal and non-mental materials for fine marking.
Most suitable for cosmetic processing on 3C products.
Specification:
Model DPF-M10 DPF-M12 DPF-M20 DPF-M30 DPF-M50
Power 10W 12W 20W 30W 50W
Wavelength 1064nm
Pulse Frequency 1KHz~500KHz
Pulse Width 150ps~200ns
Marking Mode 100mmÃ?100mm
200mmÃ?200mm
(Optional) 100mmÃ?100mm
200mmÃ?200mm
300mmÃ?300mm(Optional)
Marking Mode Stationary or movement marking (Optional)
Beam Diameter 0.03mm~0.05mm
Cooling Mode Air cooled
Ambient Environment Temperature:13ºC~35ºC
Humidity:5%~85%
Good ventilation and dust free
Power Consumption 700W
Electrical Connection Single -phase 220V/50~60Hz ,5A
Dimensions 1000mmx800mmx1380mm
1180mmx1200mmx1780mm
Weight 220kg/500 kg
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.
FAQ
1. Q: Where is TETE Laser Technology Co., Ltd located?
A: Shenzhen TETE Laser Technology Co., Ltd headquartered in Shenzhen, CHINA. Our manufacture base covered 200,000 sq. m2 in Pingshan, Shenzhen. We support dealers and agents overseas for global market.
2. Q: Are you trading company or manufacturer?
A: We a laser machinery manufacturer dedicated to professional industry laser solutions and concentrates innovation and R&D in laser machines products.
3. Q: There are so many machine types, which one should I choose?
A: We provides machine parameters in each product demo page, please kindly check technical data column. It is important to compare all data before choose the best prototype. Also, our sales team provides online services to resolve your confusion, feel free to contact us.
4. Q: This is my first time buying your machine; I have no ideas about is your machines quality?
A: Each machine is strictly produced based on the standard of ISO9001 and CE certifications. Our products have CE certifications verified by authorized agency.
5. Q: Do you provide samples? Is it free or extra?
A: Yes, we are offering samples in free charge but not delivery fees, please contact us for more information.
Suitable for marking/cutting of various non-metal materials such as plastic, rubber, resin, ceramics, film coating, stone, leather, acrylic, wood, paper and cloth, etc.
Extensively applied in fields such as garment and wearing, leather products, electronic parts and components, pharmacy/food packaging and artworks.
Specification
Model CO2-M10 CO2-M30 CO2-M50 CO2-M60 CO2-M100
Power 10W 30W 50W 60W 100W
Wavelength 10.60μm
Laser Frequency 1KHz~50KHz
Pulse Width 100mmÃ?100mm
200mmÃ?200mm
(optional) 100mmÃ?100mm,200mmÃ?200mm
It can reach to 500mmÃ?500mm with prefocusing
Cooling Mode Air cooled Water cooled
Ambient Environment Temperature:1ºC~35ºC
Humidity:5%~75%
Good ventilation and dust free
Power Consumption 1.5KW
Electrical Connection single-phase 220V/50~60Hz ,15A
Dimensions (L x W x H) Laser Cavity:1220 mmÃ?200 mmÃ?210 mm
Control system:550 mmÃ?640 mmÃ?1100 mm
Weight 200kg
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.
TETE Laser has manufactured and sold series of industrial laser processing system and provided professional industrial laser solutions to domestic and overseas customers.
Imported laser source, air cooling.
Solid and reliable design, suitable for use in harsh environments.
Stainless steel housing provides ip65 protection, completely separate cooling system ensures laser system is a key component to get the best protection, reducing maintenance requirements.
In order to do simple installation quickly, just get fiber laser coders either through the user interface settings, you can use the computer TETE software editor, or directly through the plc / line control.
Output power Laser power 10w/20w/30w
Laser wavelength 1064nm
Beam quality M2 100000h
31234 Electronics Entertainment Suppliers
Short on time? Let Electronics Entertainment sellers contact you.
Wide range: can be used on many materials like metal, plastic, leather, alloy etc. Can be used in many industries like jewelry engraving, medical devices, phone case engraving, hardware industry, stainless steel tableware, electron components marking etc.
Permanent marking: laser marking is a permanent marking. It wont fade, run or become less discernable as time passes like traditional marking including ink jet, hand engraving, dot-peen marking.
Long service time: fiber laser model has over 100, 000 hours working life. Almost no maintenance during this period.
Easy to operate: support almost any windows-based software like coreldraw, autocad, photoshop. No need to adjust q-switch easier than yag diode marking machine.
High precision: 0.0025mm re-position accuracy. Minimum line width 0.01mm.
Non-contact process: won't cause mechanical extrusion or mechanical stress to materials.
1. With a high quality of light spot, it is particularly suitable for precise processing processes such as line marking, cutting or punching on materials such as metal materials (carbon steel, stainless steel, aluminum and aluminum alloy, copper or copper alloy, titanium or titanium alloy, nickel alloy) and brittle materials (like glass, sapphire, ceramic, silicon chip).
2. Adopting a high-accuracy linear motor or an accurate screw, a metal or marble base, which can guarantee the accuracy of positioning and re-positioning.
3. With an independently developed cutting software, a simple operation interface and a stable operating system, it can satisfy demand for individuality.
4. The processing area adopts a closed design and the visible window's radiation protection treatment can guarantee processing safety.
1. Independent developed 3D laser marking software and hardware. To work with special 3D galvanometer scanner,it can do good marking on various 3D products.
2. Seamless splicing of 3D graphics ensures high precision processing control. The accuracy is ±0.03mm.
3. Type and power of laser module are optional according to marking,engraving or cutting requirements.
4. High Stability, optimized design of control system ensures stable processing and yield rate.
5. High Reliability, rapid cache transmission control,choice optical and electronic elements to make sure continuous work in long time and capacity.
6. Long Life Time, high quality fiber laser module ensure long life time to the system.
7. Safety, fully enclosed design which highly enhances safety during processing.
8. High efficiency, reduces processing time by equipping an automatic door in protective cover.
TETE Laser has manufactured and sold series of industrial laser processing system and provided professional industrial laser solutions to domestic and overseas customers.
Wide range: can be used on many materials like metal, plastic, leather, alloy etc. Can be used in many industries like jewelry engraving, medical devices, phone case engraving, hardware industry, stainless steel tableware, electron components marking etc.
Permanent marking: laser marking is a permanent marking. It won¡¡¥t fade, run or become less discernable as time passes like traditional marking including ink jet, hand engraving, dot-peen marking.
Long service time: fiber laser model has a over 100, 000 hours working life. Almost no maintenance during this period.
Easy to operate: support almost any windows-based software like coreldraw, autocad, photoshop.
High precision: 0.0025mm re-position accuracy. Minimum line width 0.01mm.
Non-contact process: will not cause mechanical extrusion or mechanical stress to materials.
TETE Laser equipments are widely used for laser marking, laser welding and laser cutting in various industries. Kinds of laser series meet different processing requirements.
Features
In a strict pursuit of exquisiteness, we offer an unrivaled technical quality
With advanced technical assurance, no frequency doubling crystal needs to be replaced, which can indeed reduce the cost
New UV-Laser adopts simplified optical design which improve its reliability
Fully enclosed design which highly enhances it's safety
New design and selective components can guarantee a long life time
1. Independent developed 3D laser marking software and hardware. To work with special 3D galvanometer scanner, it can do good marking on various 3D products.
2. Seamless splicing of 3D graphics ensures high precision processing control. The accuracy is ±0.03mm.
3. Type and power of laser module are optional according to marking, engraving or cutting requirements.
4. High Stability, optimized design of control system make sure stable processing and yield rate.
5. High Reliability, rapid cache transmission control, choice optical and electronic elements to ensure continuous work in long time and capacity.
6. Long Life Time, high quality fiber laser module ensure long life time to the system.
7. Safety, fully enclosed design which highly enhances safety during processing.
8. High efficiency, reduces processing time by equipping an automatic door in protective cover.
The diode laser module comprises a diode laser stack.
The diode laser module with a protective window.
Symmetry beam
Simple water cooling and no high pressure and high-quality water
Specifications:
Type: GTHM-500
Output peak power: 500W
Maximum operating current: 50A
Maximum pulse width: 400ms
Maximum duty cycle: 40%
Wavelength: 780-820nm
Allows broadband operators to give the best experience to their subscribers. Koncor Labs Android box gives them the power to deliver video content on home TV screens through OTT apps.
Android Hybrid TV solution is apt to pay-TV operators to retain their customers by offering OTT apps along with their existing TV offerings. Koncor Labs Android Hybrid TV solution is ready to deploy with pre-built Operator Tier Launcher and conditional access systems. Our backend CMS can be extended to other connected STBs on the field.
Fiber to the home providers can take advantage of the Triple play CPE to deliver IPTV, Broadband internet and Telephony services. Koncor Labs Triple play CPE comes with Android ATV/AOSP TV launcher, Content management, and Security. Users can get access to Video on demand apps through Operator APP store or Google Play Store in addition to Live TV and Catch UP TV services.
Linear Camera Video Track Dolly Slider, Video Stabilizer YCS6001
Carbon Fiber DSLR Camera Slider MODEL NO.: YCS6001
The track slider allows you to slide your camcorders, SLR cameras, DSLR or DV while shooting video.
It can be positioned on a tripod or attach it flipped over on two tripods to capture dynamic shots.
Two removable height adjustable legs are also included for using the slider on the ground and allows you to adjust them for uneven surfaces.
Camera Slider, Linear and Curved Camera Video Track Dolly Slider, Carbon Fiber DSLR Camera Slider Suppliers
Linear and Curved Camera Video Track Dolly Slider Product Features
- Portable camera slider. Easy to carry and use, set up in minutes.
- Made of aluminum alloy with 60cm/80cm/100cm/120cm/150cm long track.
- Built in Bubble level indicator to set a perfect angle when the slider is positioned.
- Base plate with 1/4" and 3/8" screw threads optional for versatile usage.
- Three 1/4" to 3/8" adapter/ bushing for universal mount ability on tripods.
- Max load: 22Lbs (10KG).
- Size available: 60cm, 80cm, 100cm, 120cm, 150cm
* Camera and Stand are not included.*
Linear Camera Video Track Dolly Slider, Video Stabilizer YCS6002
Carbon Fiber DSLR Camera Slider MODEL NO.: YCS6002
The track slider allows you to slide your camcorders, SLR cameras, DSLR or DV while shooting video.
It can be positioned on a tripod or attach it flipped over on two tripods to capture dynamic shots.
Two removable height adjustable legs are also included for using the slider on the ground and allows you to adjust them for uneven surfaces.
Camera Slider, Linear and Curved Camera Video Track Dolly Slider, Carbon Fiber DSLR Camera Slider Suppliers.
Linear and Curved Camera Video Track Dolly Slider Product Features
- Portable camera slider with detachable legs. Easy to carry and use, set up in minutes.
- Made of aluminum alloy with 60cm/80cm/100cm/120cm/150cm long track.
- Built in Bubble level indicator to set a perfect angle when the slider is positioned.
- Base plate with 1/4" and 3/8" screw threads optional for versatile usage.
- Three 1/4" to 3/8" adapter/ bushing for universal mount ability on tripods.
- Max load: 22Lbs (10KG).
- Size available: 60cm, 80cm, 100cm, 120cm, 150cm
