Co2 Laser Cutter System

This type machine is a kind of laser engraving machine system equipped with Co2 laser tube,it is used to engrave on acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials . Cutting, engraving and punching soft materials, such as all sorts of clothing, leather, carpet, suede fabric, denim jeans, stuffed toys, textiles, industrial fabrics etc.

Model: QM-10600 OEM CO2 Fractional Laser Machine Fotona 4d Erbium Yag Laser CO2 Fraccionado Fractional CO2 Laser Vaginal Rejuvenation Machines Applications: Traditional Fractional Model and Surgical Mode: 1) Skin renewing and resurfacing 2) Wrinkle removal, skin tightening 3) Acne and scar removal, melasma removal 4) Smooth scars like burn, surgery, traumatic, and stretch marks, etc 5) Remove intractable chloasmas and pigmentation 6) Sun damage recovery Vaginal Mode: 1)Tighten vagina-Fast tightening, lasting constriction, tightness to improve 60%; 2)Clean the vagina - Deep anti-aging, young level to improve 80%; 3)Moist vagina - Improving secretion, moisture level to improve 80%; 4)Pink vagina - Vulva rejuvenation, lighten pigment and pinks labia parts, delicate degree to improve 70% Working Principle: Unlike traditional laser, fractional laser will only cover part of the skin tissue, leaving the surrounding tissue intact, and then cause a series biochemical reactions inside the skin, thus to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the skin return to young again. The unaffected areas act as a reservoir for more effective and rapid tissue healing and collagen production, thus lift the skin and removes speckles and pigments For Vaginal rejuvenation: Use an articulate arm probe with automatically 360° rotation technology, producing in 50-70ºC at a controlled depth inside the vaginal mucosa - stimulates collagen contraction, restructuring and regeneration; promotes collagen fiber proliferating, remodeling; improves vaginal mucosa microcirculation; increases cell secretion and dynamic reaction function; corrects PH value of vaginal inside; improves the inside environment; achieve female private parts to significant lasting firming, nourishing and restoring harmonious sexual life. Specialty of QM-10600: 1. USA Coherent brand - Metal RF Tube; Even output energy, deeper penetration ( 8-10mm under the skin) Long lifespan: 8-12 years. Thinner spot: 0.01mm. 2. 3 in 1 system, easy and convenient for operation 3. Imported excellent 7 articular optical-arm, easy operated and greatly reduces the energy loss; 4. Best fractional probe- CPG (Central Pattern Generator), big and even energy output, deep penetration; 5. 3 scan modes: Sequence, Random, and Midsplit 6. Various scan shapes which can be adjusted by users, scan size 0.1*0.1mm-20*20mm 7. Ultra-quiet pump used, lower noise but larger water flow; 8. The screen can be folded up and down

Specifications A8 super pulse 30W CO2 laser treatment apparatus is called "photon scalpel of cosmetology" The unit has the finer and the shar The Ultra pulse Fractional Laser System The A8Generation-2 Ultra Pulse Co2 Fractional Laser System, with 4 working modes as pulse, Scanning, Ultra Pulse and Continuous, could do various of high-demanded laser treatment safely and effectively, specially for aesthetic surgery and dermatology. It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer¡¯s different needs, either 2 modes could be chosen in the 11 scanning modes. It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation. The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences. System Feature ¡¤Green guiding light make operation vision clearer¡¤For skin resurfacing and for dermatology cut/surgery.¡¤Various power supply for European, American and area needs.¡¤Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.¡¤With background set for operation time and machine use time.¡¤With time-accumulater for showing total operation time and machine use time.¡¤Friendly designed in modular for easy maintenance, with red and green light to guide it.¡¤Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.¡¤With energy self-replenishment system, improving the electric flue automatically to ensure real screen.¡¤With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.¡¤With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.¡¤Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society. Application: It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on. Acne scars,Surgical scars,Traumatic scars,Actinic scarsMelasma (mask of pregnancy)Skin resurfacing (to improve texture)Wrinkles around the eyes and mouthPigmented lesions : age spots/brown spots/sun spots/Red vascular removal Fractional laser working principle With fractional CO2 laser resurfacing , the laser beam is broken up pr fractionated into many small micro beams which are separated ,so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation. As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO2laser patients heal in less than one week for facial treatment. It provides results almost as good as traditional full-surface CO2laser, but with far less risk, downtime, infection and complication. Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement. Traditional full-surface CO2laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least tow weeks to heal and regrow a new top layer of skin(i.e., re-epithelialize the entire top layer of skin). Technical Specification Wave Length: 10.6umOutput Power: 1-30W adjustableMicro Pulse Energy: 5mj-100mj,16 steps adjustableEstimated Power: 125mj-1kjScanner Focus: 50mm (FFLS) or f=100mm (HFLS)Focus Spot Diameter: 0.1mm (FFLS) , 0.2mm(HFLS)Treatment Depth: 2000um (FFLS),600um(HFLS)Conducting Beam: Green Semi-conductor laser (532nm,=mW)Control System: microcomputer controlSmoke Emission System : Built-in air blowCooling System: Water coolingDisplay Screen: color LCD (8 inch touch screen)Light Delivery System:7 Joint articulated armWorking Mode: with scanner (galvanometer scanning)FFLS scanning area: max 15x15mmHFLS scanning area: max 15x15mmScanning mode: Ellipse, Rectangular (standard)Scanning velocity: 10m/sCW: output power,1-30w, 1W adjustableUltra: Frequency, 1000HZ, 1HZ adjustableTreatment control: footswitchEnvironmental Temperature: 5-40CRelative Humidity:80%Machine Weight: 40kgMachine Dimension: 450mm x 550mm x 1400mmPower Supply: AC 220/110V;50/60HZ. wooden

New design, High quality with competitive price. Widely used for Model industry(construction models, aviation and navigation models and wooden toys), advertising, decoration, arts and crafts, electronics, and electric appliances, etc.

Features of stj1390 wood laser cutting machine: 1. Adopt advanced dsp digital control system, international standard laser power supply, integrated framework style, high stability, high-speed usb 2.0 interface output can support off-line working. 2. Transmit files directly from coredraw, autocad. 3. Optimization of mechanical and electrical design, processing speed can be up to  8m/min, low noise. 4. Big power and high stability laser tube, imported lens and mirror, long life-span, one step cutting can reach 30mm thickness on acrylic. 5. Imported linear rail and high quality tapes for transmission, equip speed-down structure, ensure high quality and high stability cutting. 6. Automatic up-down table, rotary device, red dot position, vacuum system etc for optional .  Our this stj1390 wood laser cutting machine is widely used in nonmetal sheet processing, advertisement sign word production, the production of high and low voltage electrical cabinets, machinery parts, kitchen utensils and appliances, automobiles, machinery, metal crafts, saw blade, electrical parts, glasses industry, leaf spring, circuit board, electric kettle, healthcare, microelectronics, hardware, tool measuring tool and other industries. Technical parameters of wood laser cutting machine: No.Modelstj1390 1working area1300x900mm 2laser power(w)80w co2 laser tube 3tableblade table 4drive systemstepper motor and drivers 5transmissionbelt from shanghai fulong 6mirror and lensefrom singapore 7dust collector systemwith 8air pumpwith 9water pumpwith 10control panelruida 6442s 11engraving speed0-60000mm/min 12engraving depth0-3.5mm 13minimum shaping character"chinese: 2*2mm english: 1*1mm" 14resolution ratio0.025mm 15power supply220v , 50hz 16resetting positioning accuracy

# 3 Year for machinery warranty| 1.5 Year for mian parts # Our technician is able to re-install or set up by remote for free. # Main parts(excluding the consumables) shall be replaced/repaired free of charge, if there is any problem during the warranty period. # Our technician is able to teach you online to run the machine or eliminate the fault for free. # We are able to train your staff after placed order in our factory for free. # We are able to send technician to your workshop to do the installation and training. You will need bear the related costs(flight, visa, hotel, training costs, etc.

CO2 Laser Marking Machine CO2 Laser Marking Machine for sale custom Laser Marking Machine factory Why our CO2 laser marking machine more better Compact and portable structure Easy put into your trunk or your car boot Perfect Marking Performance Fiber source can use 30000 hours Working speed 5000-10000mm/s Field Lens from 110 to 600mm (different working area price different) High Speed scan head Red point : Clear the working path when it working. Control software : EZCAD Power consumption : 1-2 kw /H. Voltage AC220V10% ,50/60HZ or by customer need voltage. 5 years machine produce experience we have mastered the core technology of the Co2 laser marking machine. laser marking machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. Our CO2 laser marking machine has many advantages such as compact and portable structure, perfect marking performance and fiber source can use 30000 hours. What is Mainstream types of laser marking machines in 2020? They are fiber laser marking machine, 3d CO2 laser marking machine and semiconductor laser marking machine. For more information on precision laser cutting machine, please click here to browse our website.

It can be used for non-metal and thin metal processing. Widely used in advertising industry, handicraft industry, toys, clothing, construction, packaging, paper, etc. Applicable materials: stainless steel, carbon steel, acrylic, MDF board, clothing, leather, paper, etc. Working Size: 1300*900mm Laser Type : CO2 Laser Tube Laser Power : 150W/180W/280W/300W Control System: DSP Offline / USB Compatible Software : Autocad/Coreldraw/Photoshop Voltage : 220V/50Hz(110V/60Hz)

Co2 laser system treatment princple Co2 laser treatment using sealed-off co2 laser, wavelemgth 10600nm, the output invisible infrared laser beam is characterized by small, high energy density; laser beam output by the focusing mirror, the point of the target tissue can Power to tissue >15w Focal spot diameter