The medical application of CO2 laser is based on the principle of Photo-thermal Ablation. Once the CO2 laser is delivered to the soft tissue, the light energy is absorbed by the water inside the biological soft tissue. By heating up and vaporizing the water, the biological tissue is torn apart. In order to minimize heat convection to surrounding tissue and collateral heat damage, the duration of the laser beam on the tissue can be controlled under 1 ms. The CO2 laser system delivers an intense infrared light beam with 10600 nanometers wavelength which can be absorbed by body tissue (no matter what color the skin is) almost by 100%. This specific wavelength has a dramatic effect to biological soft tissue. Our CO2 surgical laser system uses state-of-the art technologies and is designed to cut, vaporize, burn, and solidify tissue for different clinical surgery procedures. At the same time our laser system uses controlled pulses of light to precise ablate, cut or remove target tissue by vaporizing tissue. It has been proven to be reliable and easy to operate and it is totally different from traditional surgical tool. Application: Dermatology : The double-eyelid, eye surgery, face and other parts of the grinding wrinkles, the grinding of a variety of scars, pigmentation of the hair transplant surgery hemorrhoids, warts, freckles, and tumor. ENT: rhinitis, turbinate hypertrophy, nasal polyps, pharyngitis etc. Dental : leukoplakia, glandular cheilitis, mucinous cyst, sublingual gland cyst. Gynecology : cervical erosion, cervical polyp, cyst. Surgery : external hemorrhoids, anal fistula, circumcision, genital warts, underarm odor, etc. Physiotherapy : cervical spondylosis, frozen shoulder, ulcers. Features: *True LCD touch screen micro-computor control system,user-friendly design,easy for operation. *SFDA & CE medical * Steady and stable Laser Beam Quality * User-friendly Graphic Interface * Safety protection with automatic alarm * 360 degree rotation with 7-joints articulate arm * Micro-computer control,high definition of laser beam Technical Specifications:1. Laser TypE:Pco15-bc02(sealed off) 2. Wave Length: 10600nm 3. Laser Mode: Low-order modes 4. Output Power: 1~30w. cont. Adjustable 5. Laser Operation Modes: CW, Single Pulse, Repeat Pulse, Ultra Pulse 6. Tissue Exposure Modes: Continuous, Single Pulse, Repeat Pulse, Pulse 7. Ultra-pulse Frequency: 10~990Hz, Ultra-pulse Duration: 0.1~1.7ms 8. Continuous, time, repeated pulse 0.05, 0.1, 0.2, 0.5s 9. Aiming Beam: 5 mW 670nm Diode Laser (Light adjustable) 10. Beam Delivery System: 7- joint Spring- Balanced Articulated 11. Cooling system :Sealed of water circulation system 12. Control System: Microprocessor Controlled 13. Smoke Emission Smoke-blowing system inside 14. Operating Control Footboard switch 15. Input Power: 110V AC/ 60Hz or 220V AC/ 50Hz. wooden box
Features: Screen size: 23.6 inches Functions: Antenna impedance: vhf/uhf 75 (coaxial) Tuner: integrated and frequency syntheses Tv system: pal/secam/ntsc Audio system: nicam and a2 (optional) Video input: cvbs s-video, scart (s-video rgb/ycbcr) Video output: cvbs (scart) Audio input: left right Audio output: left right (scart) Tone: bass, treble, balance Frequency: 100hz to 15khz. Carton
Feature: 1Modular design (Laser device module, light scanning module, computer controller module, control box module, laser power module, Q switch power module, cooling system module) each module own independent running space, easy to direct-connect and reduce interruption caused by electromagnetic and hot temperature, ensue the system running long time stably. 2Super prcised light cavity design Professional laser resonance cavity designing ensure high laser output frequency and best laser model, and reduce the dependence to the temperature. 3Flexible control method All control module own two control mode ( hand adjustment and program-control adjustment), which can satisfy different customer needs. Refer to marking electric current, frequency and related parameter, you could adopt the method of hand adjustment. 4light route preview function, focus indication function Add visible red light in the laser light bearing to indicate the position of laser beam, could reach the function of preview to the marking area. Add indicated focus red light, more easy to reach focus function. 5Multi-function marking software Strong picture-drawing and editing function. Auto-linking to selected object, and easy to operation and view. Support Truetype font, single line font, single dimension bar code and two dimension bar code. Support 256 pens, and could set different processing parameter for different object. Basic Technical Parameter: Model WYDP50 /WYDP75 Laser Medium Nd:YAG Laser power 50W/75W Laser wavelength 1064nm Repeated frequency 50KHZ Marking area 110mm Marking depth1.0mm Marking speed\7000mm/s Min marking width 0.04mm/0.05mm Min Character 0.2mm/0.3mm Repeated Precision 0.005mm Complete machine Max. Power 1.5KW/2.0KW Power supply 220V/single phase/50HZ/15A Working environment Temperature 5-28 degree, Humidity
1470nm 810nm/980nm. 400(w)*385(l)*200(h)
The model Dw-co2-80w-9060-a Working area 900mm*600mm Laser power 80w Laser type Reci hermetic co2 glass tube Guide rails Taiwan imported linear guide rails Control system Dsp industrial control system Working table Aluminum platform Drive system Japan imported step motors Lens Imported focus lens and mirrors Positioning accuracy 0.01mm Cutting speed 1~1500mm/min Engraving speed 1~3000mm/min Cooling way Water cooling and production system Graphic format supported Bmp, gif, jpeg, dwg, psd, tiff, plt, cdr, dmg, Compatible software Coreldraw, photoshop, autocad Interface Usb Application computer system Windows 2000/windows xp/windows7 Cutting thickness 0-15mm(depends on different material) Optional Equipe with rotary device, industrail chiller cw3000 Worktable Electric up-down worktable max distance 500mm Applicable materials Non-metal materials such as acrylic, double color board, plexiglass, leahter, fabric, paper, hair felt.Carpet, Common glass, bamboo and wood, rubber, pvc, polypropylene, marble, granite and tiles, leather cloth etc. Applicable industries: Advertising industry, billboards, artistic gifts, crystal ornaments, paper-cut, bamboo, home design decorate industry, And wooden product, garment and leather, embroidery, decoration and upholster industry. Packing Plywood case Machine dimension L1450mm*w950mm*h1100mm Packing size 1680mm*1200mm*1250mm Net weight 210kg Gross weight 285kg
Features: Support major media source format in both hd and sd. Different models based on customers' requirements suits different needs. Support major cas systems in broadcasting industrial. Support major middlewares for value-added services, in order to support service expanding of data broadcasting, stock information, vod, nvod, advertising and many others. Ease of upgrade with stable upgrade policies such as online upgrade, usb upgrade and serial interface upgrade, in order to fulfill different service needs from customers. Distinguish high performance price ration with outstanding reliability. Flexibility of customization in accordances to specific customer requirement.
Features: Integrated with h.264, avs, mpeg-2/mpeg-4 decoding modules in both hd and sd, with self adaptive capability in accordance with input ts format. Support dvb-t and dtmb single-carrier and multi-carrier modes. Support power failure memory recovery, program management and epg. Optional support of value-added services such as data broadcasting, advertising, pvr, pushvod and many others. Support online upgrade and driver protection.
Features: Conventional appliance that can be applied to any standard ip data transmission network platform including ethernet-on-coax (eoc) network. Prospective device that supports full hd decoding, in order to preserve original audio/video quality. Highly compatible with other pms with standard data interface. Supporting of online upgrade ensures outstanding expandability for future scale expansion and new service implementation.
Laser tube type Sealed co2 laser tube Laser power 60w /40w Engraving area 600 x400mm Whole machine size 1, 330 x 810x 1075mm Engraving speed 0 - 72, 000mm/min Repositioning accuracy ¡à0.1mm Power supply Ac 110 - 220v0%, 50 - 60hz Gross power
This modle can be desiged according to customer needs . High configuration ballscrew model can be built up to350mm, the gantry tends to tremble beyong that height , while gearwheel models can be maximam 500mm to ensure overall stability. X.Y work area: 1200x1200mm. Z axis :350mm. Special made by order . Performance parameter,Mt-cr1208 Spindle roating speed,0-24000rpm Power,220v-50hz Max feeding,25m/min Work holding,By suction Spindle rate,2.2kw(water cooling) Drive moter,Stepper motor Interface,Usb Power(not include the spindle),3kw Resolution ratio,0.005mm Reposition precision,0.05mm Operation code,G code Dust collector,Yes
Specifications Maximum laser power: 12w Laser wavelength: 1064nm Beam quality m2: < 2.5 Q-switch frequency: 100khz Minimum q-switch laser pulse width: 25ns The largest q-switch peak laser power: 100kw Standard engraving range: 110x110mm / 200x200mm Minimum line width: 0.01mm Repeat accuracy: 0.001mm Total power: 2kw The demand for electricity: 220v 22v/50hz/10a.
Technical parameters: Maximum laser power: 10w Laser wavelength: 10.64¦ìm Laser repetition frequency: 50 khz Standard engraving range: 110mm110mm Engraving depth: 5mm Engraving line speed: 7000mm / s Minimum line width: 0.1mm Minimum characters: 0.4mm Repeat accuracy: 0.01mm Total power: 0.6kw The demand for electricity: 220v / single phase / 50hz / 3a.
Technical parameters: Maximum laser power: 30w Laser wavelength: 10.64ìm Laser repetition frequency: 50khz Standard engraving range: 110mm110mm Engraving depth: 5mm.
Specifications Laser-pumped mode: lamp-pumped Laser wavelength: 1064nm Laser frequency: 0-50khz Laser power: 50w Q-switch mode: acoustic-optic q-switch Pulse width: 20ns Beam quality: m2 < 10 Maximum carving speed points /s: 7000mm/s Standard engraving range (mm): 100 100 Laser head number: 1 Focal length: 100mm Focus diameter: 0.05mm Minimum marking characters: 0.3mm Cooling method: water-cooled Easy-wearing parts: kr lamp Easy-wearing parts usage time: 800 hours Applicable materials: metal and some non-metallic materials Input power: ac380v 10% 50-60hz Equipment power: 5kw The software: english and chinese marking software Engraving accuracy: 0.005mm Repeat accuracy: 0.005mm
Maximum laser power: 50w Laser wavelength: 1064nm Beam quality m2:
Pentagon rf co2 fractional laser for skin rejuvenation, scar removal etc. With hand held scanner for fractional use., and also with focused hand piece, normal laser surgery.
Pentagon rf co2 fractional laser with hand held scanner for skin rejuvenation, scar removal etc.
Specifications A8 super pulse 30W CO2 laser treatment apparatus is called "photon scalpel of cosmetology" The unit has the finer and the shar The Ultra pulse Fractional Laser System The A8Generation-2 Ultra Pulse Co2 Fractional Laser System, with 4 working modes as pulse, Scanning, Ultra Pulse and Continuous, could do various of high-demanded laser treatment safely and effectively, specially for aesthetic surgery and dermatology. It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer¡¯s different needs, either 2 modes could be chosen in the 11 scanning modes. It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation. The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences. System Feature ¡¤Green guiding light make operation vision clearer¡¤For skin resurfacing and for dermatology cut/surgery.¡¤Various power supply for European, American and area needs.¡¤Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.¡¤With background set for operation time and machine use time.¡¤With time-accumulater for showing total operation time and machine use time.¡¤Friendly designed in modular for easy maintenance, with red and green light to guide it.¡¤Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.¡¤With energy self-replenishment system, improving the electric flue automatically to ensure real screen.¡¤With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.¡¤With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.¡¤Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society. Application: It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on. Acne scars,Surgical scars,Traumatic scars,Actinic scarsMelasma (mask of pregnancy)Skin resurfacing (to improve texture)Wrinkles around the eyes and mouthPigmented lesions : age spots/brown spots/sun spots/Red vascular removal Fractional laser working principle With fractional CO2 laser resurfacing , the laser beam is broken up pr fractionated into many small micro beams which are separated ,so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation. As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO2laser patients heal in less than one week for facial treatment. It provides results almost as good as traditional full-surface CO2laser, but with far less risk, downtime, infection and complication. Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement. Traditional full-surface CO2laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least tow weeks to heal and regrow a new top layer of skin(i.e., re-epithelialize the entire top layer of skin). Technical Specification Wave Length: 10.6umOutput Power: 1-30W adjustableMicro Pulse Energy: 5mj-100mj,16 steps adjustableEstimated Power: 125mj-1kjScanner Focus: 50mm (FFLS) or f=100mm (HFLS)Focus Spot Diameter: 0.1mm (FFLS) , 0.2mm(HFLS)Treatment Depth: 2000um (FFLS),600um(HFLS)Conducting Beam: Green Semi-conductor laser (532nm,=mW)Control System: microcomputer controlSmoke Emission System : Built-in air blowCooling System: Water coolingDisplay Screen: color LCD (8 inch touch screen)Light Delivery System:7 Joint articulated armWorking Mode: with scanner (galvanometer scanning)FFLS scanning area: max 15x15mmHFLS scanning area: max 15x15mmScanning mode: Ellipse, Rectangular (standard)Scanning velocity: 10m/sCW: output power,1-30w, 1W adjustableUltra: Frequency, 1000HZ, 1HZ adjustableTreatment control: footswitchEnvironmental Temperature: 5-40CRelative Humidity:80%Machine Weight: 40kgMachine Dimension: 450mm x 550mm x 1400mmPower Supply: AC 220/110V;50/60HZ. wooden
Aroma hair removal diode laser for hair removal on body, face, arm, leg etc.
Therapy Principle Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues Product Characteristics 1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory. 2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot. 3. High purity green light with good therapy results. 4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate. 5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance 6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation 8. CE approval Therapy Scope 1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity. 2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal Therapy Characteristics Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too. Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus. Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power! With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity. Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin. Main Technical Parameter Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode) Laser wavelength1064nm/532nm Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75% Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm Laser aiming red semi-conductor aiming beam, wavelength 650~670nm Laser pulse width 6~8ns Single pulse energy 1000mJ(1064nm)/500mJ(532nm) Repeat frequency 1~10Hz/1Hz step Cooling systemclosed inside circulation water and constant temperature condition system Dimension 500 900 910 mm3 Weight 85Kg Power supply AC220/110V 10%,50/60Hz. wooden
