Application Aterlevel systems keep valueable optic components always in definite safe condition. Optical components are never burnt out. 8.It can be upgrated with ic system (customer need to specially notify this requirement to us if they need this system) 9.Medical ce approval, iso13485:2003 and iso9001:2008.
Therapy Principle Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues Product Characteristics 1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory. 2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot. 3. High purity green light with good therapy results. 4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate. 5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance 6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation 8. CE approval Therapy Scope 1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity. 2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal Therapy Characteristics Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too. Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus. Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power! With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity. Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin. Main Technical Parameter Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode) Laser wavelength1064nm/532nm Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75% Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm Laser aiming red semi-conductor aiming beam, wavelength 650~670nm Laser pulse width 6~8ns Single pulse energy 1000mJ(1064nm)/500mJ(532nm) Repeat frequency 1~10Hz/1Hz step Cooling systemclosed inside circulation water and constant temperature condition system Dimension 500 900 910 mm3 Weight 85Kg Power supply AC220/110V 10%,50/60Hz. wooden
Treatment theory hair removal E-light beauty machine= ipl + bipolar radio frequency + intelligent cooling system, when use together, you will see the amazing treatment result. Feature hair removal 1. Remove completely many kinds of spots, for example, freckle, chloasma, butterfly rash sunbum, age pigment, coffee speckle, cosmetic. 2. It is a effective hair removal tool, and it can clear away body & facial hair, clypeal hair, armpit hair, bikini hair, leg hair, arm hair and others body hair. 3 .It could dispel angiotelectasia, acne, scra of acne and erythema. 4. It could enhance breast, make women breast much more attractive. 5. It can remove wrinkle from our skin and meet much more glossy/soft , our skin hardly wrinkled. Applications hair removal 1. Hair removal: e-light will destroy the hair-follicle, and then achieve permanent hair removal effect. Whether black or golden hair and light-colored hair can be removed.2. Spot removal: e-light can reach the epidermis and dermis, borken down abnormal pigment cells. So that they will slowly eliminated from the body. 3. Red capillary and acne: e-light will closed abnormal blood vessels, clean the skin , kills the acne bacillus, make the skin more glossy, white.4. Skin rejuvenation: e-light stimulate collagen proliferation, make skin tighting and lifting, remove wrinkle and more white.5. Breast lifting: e-light wavelength can promote the breast regeneration. Make breast biger and biger. Wavelengh430/480/530/560/590/640/690/750nm Energy density0-50 j/cm2 Rf frequency0.1-10 mhz Rf power0-50w Light spot area10×20mm², 10×40mm².13×30mm², 15×35mm² Total enery supply1200w Cooling systemSemiconductor+ air-cooled + colse water circulation Operative screenTouch color lcd screen, Probe tempreture-4°c-0°c Dimension42*38*103cm Weight50kg Voltage220v110v/15a 50hz(60hz). Wooden
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Laser cutting (84561000)
The medical application of CO2 laser is based on the principle of Photo-thermal Ablation. Once the CO2 laser is delivered to the soft tissue, the light energy is absorbed by the water inside the biological soft tissue. By heating up and vaporizing the water, the biological tissue is torn apart. In order to minimize heat convection to surrounding tissue and collateral heat damage, the duration of the laser beam on the tissue can be controlled under 1 ms. The CO2 laser system delivers an intense infrared light beam with 10600 nanometers wavelength which can be absorbed by body tissue (no matter what color the skin is) almost by 100%. This specific wavelength has a dramatic effect to biological soft tissue. Our CO2 surgical laser system uses state-of-the art technologies and is designed to cut, vaporize, burn, and solidify tissue for different clinical surgery procedures. At the same time our laser system uses controlled pulses of light to precise ablate, cut or remove target tissue by vaporizing tissue. It has been proven to be reliable and easy to operate and it is totally different from traditional surgical tool. Application: Dermatology : The double-eyelid, eye surgery, face and other parts of the grinding wrinkles, the grinding of a variety of scars, pigmentation of the hair transplant surgery hemorrhoids, warts, freckles, and tumor. ENT: rhinitis, turbinate hypertrophy, nasal polyps, pharyngitis etc. Dental : leukoplakia, glandular cheilitis, mucinous cyst, sublingual gland cyst. Gynecology : cervical erosion, cervical polyp, cyst. Surgery : external hemorrhoids, anal fistula, circumcision, genital warts, underarm odor, etc. Physiotherapy : cervical spondylosis, frozen shoulder, ulcers. Features: *True LCD touch screen micro-computor control system,user-friendly design,easy for operation. *SFDA & CE medical * Steady and stable Laser Beam Quality * User-friendly Graphic Interface * Safety protection with automatic alarm * 360 degree rotation with 7-joints articulate arm * Micro-computer control,high definition of laser beam Technical Specifications:1. Laser TypE:Pco15-bc02(sealed off) 2. Wave Length: 10600nm 3. Laser Mode: Low-order modes 4. Output Power: 1~30w. cont. Adjustable 5. Laser Operation Modes: CW, Single Pulse, Repeat Pulse, Ultra Pulse 6. Tissue Exposure Modes: Continuous, Single Pulse, Repeat Pulse, Pulse 7. Ultra-pulse Frequency: 10~990Hz, Ultra-pulse Duration: 0.1~1.7ms 8. Continuous, time, repeated pulse 0.05, 0.1, 0.2, 0.5s 9. Aiming Beam: 5 mW 670nm Diode Laser (Light adjustable) 10. Beam Delivery System: 7- joint Spring- Balanced Articulated 11. Cooling system :Sealed of water circulation system 12. Control System: Microprocessor Controlled 13. Smoke Emission Smoke-blowing system inside 14. Operating Control Footboard switch 15. Input Power: 110V AC/ 60Hz or 220V AC/ 50Hz. wooden box
Specifications A8 super pulse 30W CO2 laser treatment apparatus is called "photon scalpel of cosmetology" The unit has the finer and the shar The Ultra pulse Fractional Laser System The A8Generation-2 Ultra Pulse Co2 Fractional Laser System, with 4 working modes as pulse, Scanning, Ultra Pulse and Continuous, could do various of high-demanded laser treatment safely and effectively, specially for aesthetic surgery and dermatology. It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer¡¯s different needs, either 2 modes could be chosen in the 11 scanning modes. It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation. The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences. System Feature ¡¤Green guiding light make operation vision clearer¡¤For skin resurfacing and for dermatology cut/surgery.¡¤Various power supply for European, American and area needs.¡¤Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.¡¤With background set for operation time and machine use time.¡¤With time-accumulater for showing total operation time and machine use time.¡¤Friendly designed in modular for easy maintenance, with red and green light to guide it.¡¤Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.¡¤With energy self-replenishment system, improving the electric flue automatically to ensure real screen.¡¤With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.¡¤With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.¡¤Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society. Application: It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on. Acne scars,Surgical scars,Traumatic scars,Actinic scarsMelasma (mask of pregnancy)Skin resurfacing (to improve texture)Wrinkles around the eyes and mouthPigmented lesions : age spots/brown spots/sun spots/Red vascular removal Fractional laser working principle With fractional CO2 laser resurfacing , the laser beam is broken up pr fractionated into many small micro beams which are separated ,so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation. As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO2laser patients heal in less than one week for facial treatment. It provides results almost as good as traditional full-surface CO2laser, but with far less risk, downtime, infection and complication. Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement. Traditional full-surface CO2laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least tow weeks to heal and regrow a new top layer of skin(i.e., re-epithelialize the entire top layer of skin). Technical Specification Wave Length: 10.6umOutput Power: 1-30W adjustableMicro Pulse Energy: 5mj-100mj,16 steps adjustableEstimated Power: 125mj-1kjScanner Focus: 50mm (FFLS) or f=100mm (HFLS)Focus Spot Diameter: 0.1mm (FFLS) , 0.2mm(HFLS)Treatment Depth: 2000um (FFLS),600um(HFLS)Conducting Beam: Green Semi-conductor laser (532nm,=mW)Control System: microcomputer controlSmoke Emission System : Built-in air blowCooling System: Water coolingDisplay Screen: color LCD (8 inch touch screen)Light Delivery System:7 Joint articulated armWorking Mode: with scanner (galvanometer scanning)FFLS scanning area: max 15x15mmHFLS scanning area: max 15x15mmScanning mode: Ellipse, Rectangular (standard)Scanning velocity: 10m/sCW: output power,1-30w, 1W adjustableUltra: Frequency, 1000HZ, 1HZ adjustableTreatment control: footswitchEnvironmental Temperature: 5-40CRelative Humidity:80%Machine Weight: 40kgMachine Dimension: 450mm x 550mm x 1400mmPower Supply: AC 220/110V;50/60HZ. wooden
Triple Wavelengths Diode Laser
Theory The Diode Laser Hair Removal Equipment emits 808nm high-energy continuous laser. The laser is particularly sensitive to hair follicle melanocytes, but does not damage the normal epidermis. It directly acts on the hair follicle melanin to produce a photothermal effect, and the hair follicle is heated to 45-50 degrees Celsius. Maintaining for a period of time can achieve the destruction of hair follicles and their stem cells, and achieve the purpose of permanent hair removal. Specification Model NO. MED-808m Laser Type High Power Diodes/Diode Laser Hair Removal Equipment Wavelength 808nm Standard 755nm, 1064nm, Tri-wavelength optional Changeable Spot size 9 9, 12 12, 12 18 optional Spot Size 12 12mm Repetition Rate up to 10HZ Fluence 10-125J/CM2 Pulse Width 10-400ms Peak Power 2500W Platform Specifification 100-240VAC 12A MAX/50-60HZ Net Weight 27KG Dimension 397mm 357mm 463mm Advantage �·Safe and Comfortable, Double Benefits Diode Laser Hair Removal Equipment with double TEC Active Cooling Modular brings twin cooling effects. Double TEC starts working when water temperature is above 25C, to make sure water temperature between 25C and 30C, and pure sapphire cool enough. In this case, the safest and most comfortable treatment is available. Super long continuous working time will double your business. Easy Touch and Intelligent Diagnostic System Diode Laser Hair Removal Equipment with easy touch software provides recommended settings for various skin types and hair colors to end users, makes operation no difficult any more. Smart errors diagnostic system provides Working Notes for important components such as fans, pump and cooling system. Half your time and cost invest in after sales service. Before&After Package&Delivery Package Standard Flight Case Delivery Within 3-4 Working Days Shipment Door to door(DHL/TNT/UPS/FEDEX), By air, By sea
CO2 Fractional Laser Skin Resurfacing machine removes layers of skin tissue in a fractional method (columns of skin are removed, leaving the skin surrounding each column intact to aid in healing) to help reduce age-spots (also called sun freckles, liver spots, and lentigines), fifine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer of the face, neck, and chest.
