The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be connected To non-addressable devices when used with addressable input modules. Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile Cause-and-effect pc-based programming tool enables rapid customization with software for sites that Require special operating features. The 6001 comes standard with features that allows flexibility and expandability. Single loop or 2-loop options available Single loop, expandable to 2-loops available Networkable, up to 4 control panels Up to 125 addressable devices per loop Automatic device detection on start-up Automatic device type-code verification 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output Backlit lcd display providing 4 rows of 40 characters 16 zone fire alarm led indicators 3000 event history log
The 4001 non-addressable control and indicating equipment forms the central part of a fire detection and alarm System. The 2-wire 4001 is compatible with numens non-addressable devices The 4001 comes standard with features that allows flexibility and expandability. Default configuration programming Facilitates out-of-box installation and rapid commissioning. 2, 4, 8, or 16 detection zones Up to 32 non-addressable devices per alarm zone circuit Configurable non-latching alarm zones, alarm dependency (zone coincidence detection), and output delay timer 3 access levels Single-person test mode Day/night mode Manual activation of audio/visual alarm devices Supervised auxiliary dc 24 v output 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output 3 voltage-free inputs for remote reset, evacuation start/stop, and day/night mode Supports up to 7 repeater panels
The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be Connected to non-addressable devices when used with addressable input modules. Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile Cause-and-effect pc-based programming tool enables rapid customization with software for sites that require Special operating features. The 6001 comes standard with features that allows flexibility and expandability. Single loop or 2-loop options available Single loop, expandable to 2-loops available Networkable, up to 4 control panels Up to 125 addressable devices per loop Automatic device detection on start-up Automatic device type-code verification 2 independently programmable non-addressable a/v alarm output circuits 2 programmable fire alarm relay outputs Fault relay output Backlit lcd display providing 4 rows of 40 characters 16 zone fire alarm led indicators 3000 event history log
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional 8 wired guarding zones for connecting wired sensors, 1 x relay outputs, can control home appliances remotely through the relay output;40 wireless guarding zones; Sms 5 phones automatically while alarming Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. Digital inputs are adopted opti cal-coupled isolators, which can prevent external high voltage from destroying internal. Arm/disarm and program the system by phone & sms Record function: maximum recording time:1 minute Tamper device: arming while the control panel removing or shaking. With standby rechargeable battery. The host automatically stores system status, while its power is off. Packaging weight: 1.3kg Packaging dimension: 290(l)*270(w)* 85(h) mm Standard package included:bl-5000 mainframe x1?remote controller x2?wired mini siren x1?wireless digital keypad x1?ac adaptorx1?user manual x1;
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm. Send sms to 6 preset mobile phone numbers automatically while alarming. Auto-dial 2 preset phone numbers and monitor the alarm site while alarming. Can connect line-cut/movement/vibration sensors etc., it will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Packaging weight: 3.8kg Packaging dimension: 300(l)*138(w)*235(h) mm Standard package included:bl-3000 mainframe x1?wireless digital keypad x1?user manual x1;
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Send mms to user’s phone Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm Call and sms several phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. It will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Packaging weight: 4kg Packaging dimension: 300(l)*138(w)*235(h) mm Standard package included:bl-3030 mainframe x1?wireless digital keypad x1?camera x1?user manual x1
Support 3g/wcdma frequency With 300k pixels cmos sensor. Built in ir red, support wireless video surveillance 24 hours. Built-in pan/tilt, horizontally 270°, vertically 90°, Support sd card(max 32gb) Arm/disarm and emergency alarm by remote controller Excellent wide dynamic function, wdr=100db Control program the system(like set language) by sms commands. Sms, mms, call and video phone automatically while alarming Support magic rotation 88wireless guarding zones, wireless alarm sensors inputs(315mhz or 433mhz) Send sms and call to 10 mobile phones automatically while alarming. Adopts wireless signal transmission, no need to connect to wire and easy for installation. Support motion detecting and video call anywhere and anytime.
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional With color lcd show screen and keyboard on the host. 88wireless guarding zones (learning code), 6 wired guarding zones/ 40 wireless guarding zones(fixed code), 6 wired zones optional App supported White/black optional Send sms and call to 5 mobile phones automatically while alarming. Talkback function: can speak with field person. Record function: maximum recording time:20s Timing arm/disarm function. Arm/disarm and program the system by control keyboard on the mainframe & phone & sms & remote controller With standby rechargeable battery. The host automatically stores system status, while its power is off. Packaging weight: 1.3kg Packaging dimension: 290(l)*270(w)* 85(h) mm
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Send mms to user’s phone Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm Call and sms several phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. It will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc.
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional With camera & pir itself Can send mms to your mobile phone. Can send picture to your e-mail. Can match wireless detectors/sensors with mainframe by learning code. Ir thermo image monitoring and detection for moving objects, the double detection technology can eliminate the false alarm caused by environmental reasons. With ir night vision camera, it provides full time 24 hours day and night monitoring function. 16 wired guarding zones(8 input, 8 output), 11 wireless guarding zones? Arm/disarm/partial arm by remote controller or sms. Auto-dial 1 preset phone numbers of alarm center.
Support 3g/wcdma frequency With 300k pixels cmos sensor. Built in ir red, support wireless video surveillance 24 hours. Built-in pan/tilt, horizontally 270°, vertically 90°, Support sd card(max 32gb) arm/disarm and emergency alarm by remote controller Excellent wide dynamic function, wdr=100db Control program the system(like set language) by sms commands. Sms, mms, call and video phone automatically while alarming Support magic rotation 88 wireless guarding zones, wireless alarm sensors inputs(315mhz or 433mhz) Send sms and call to 10 mobile phones automatically while alarming. Adopts wireless signal transmission, no need to connect to wire and easy for installation. Support motion detecting and video call anywhere and anytime.
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. .Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard Sms 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, can clearly Hear the voice. Auto-dial 1 preset phone numbers of alarm center Alarm panel with lcd display & keypad, easy to operate. Sms alert & auto-dial alert when ac power outage, ac power recovered With standby rechargeable battery. The host automatically stores system Status, while its power is off. With wired mic interface, switching the sound off and siren
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional 40 wireless guarding zones 2, 000, 000 pixel App supported Send 3 groups sms, mms, call, email Support sd card With camera & pir itself Can send mms to your mobile phone. Can send picture to your e-mail. Can match wireless detectors/sensors with mainframe by learning code. Ir thermo image monitoring and detection for moving objects, the double detection technology can eliminate the false alarm caused by environmental reasons. With ir night vision camera, it provides full time 24 hours day and night monitoring function. Arm/disarm/partial arm by remote controller or sms. Auto-dial 1 preset phone numbers of alarm center
Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional 4 wired guarding zones for connecting wired sensors, 1 x relay outputs, 40 wireless guarding zones; With usb interface Sms/mms 5 phones automatically while alarming Call 5 phones automatically while alarming and drive wiretap, can Clearly hear the voice on the scene Digital inputs are adopted opti cal-coupled isolators, which can prevent external high voltage from destroying internal. Arm/disarm and program the system by phone & sms Record function: maximum recording time:1 minute Tamper device: arming while the control panel removing or shaking With standby rechargeable battery. The host automatically stores System status, while its power is off
Mainly applied to the security of power transformer, electric transmitting line and street lamp line etc. Monitor 3 phase loss voltage and single phase failure of the electric distribution network. With 4 routes of wired input alarm. Send sms to 6 preset mobile phone numbers automatically while alarming. Auto-dial 2 preset phone numbers and monitor the alarm site while alarming. Can connect line-cut/movement/vibration sensors etc., it will alarm when power transformer is damaged or moved. Can connect with the alarm center through gsm network. The system has power-off protection function. When the external power supply is damaged or the power is off, the system can continue to work with a backup battery. Completely sealed aluminum outer shell: waterproof, anti-corrosion, fireproof, strike preventing which are suitable for outdoor installation. This system is mainly applied to the security of power transformer, electric transmitting line and street lamp line etc.
1.Can connect external industrial camera, this system with own SMS,MMS, Email functions 2.8 wired zones,open/closed alarm mode is optional by self-programming 3.Fixed code: 40 wireless zones,315/433MHz(optional) 4.Digital inputs are adopted optical-coupled isolators, which can prevent external high voltage from destroying internal components. 5.Send SMS automatically to report the state of digital input when it returns normal status. 6.Wireless keyboard for setting phone No. 7.Arm/disarm remotely through GSM SMS. 8.Send SMS and auto-dial to 5 preset mobile phone numbers while alarming and monitor the sound at site. 9.Record function: Maximum recording time:1 min 10.Voice function: support play the user record voice 11.With wired Mic interface and siren interface 12.Inquiry host’s status /alarm events/zones’name and arm/disarm status through SMS 13.Digital inputs are adopted cal-coupled isolators,which can prevent external high voltage from destroying internal. 14.GSM network wireless communication for alarm,no PSTN cable,not fear cable cut 15.Connect with alarm center through GSM network -
Warm tip: BL-E99 is a home security anti-theft security system. It is burglar security alarm system which has 88 wireless can connect with other sensors like Magnetic door/window sensors, Smoke Detectors, gas detector, Infrared Sensors, remote control etc. in additional. When something happened in your home, the home wireless GSM alarm system can send the MMS to you. The wireless home safe alarm system compatible with all the GSM SIM cards, suitable for global users. arm/disarm each guarding zone independently, with 4 wired guarding zones for connecting wired sensors, Inform user if the power off via call/SMS, arm/disarm and program the system by control keyboard on the mainframe & phone .it is better choice for the user which doesn t need too much accessories. Main Function 1.With 2 wired zones for connecting wired sensors 2.SMS 5 phones automatically while alarming and drive wiretap. 3.Call 5 phones automatically while alarming and drive wiretap, Can clearly hear the voice. 4.Auto-dial 1 preset phone numbers of Alarm Center 5.Alarm panel with LCD display & keypad, easy to operate. 6.SMS alert & auto-dial alert when AC Power outage, AC power recovered 7.with standby rechargeable battery. The host automatically stores system status, while its power is off. 8.With wired MIC interface, switching the sound off and siren 9.Talkback Function: can speak with field person. 10.arm/disarm and program the system by control keyboard on the mainframe & phone & SMS & Remote controller 11.Timing arm/disarm function. 12.record function: Maximum recording time:20S 13.voice function:support play the user record voice. 14.Built-in high standard Internal Antenna with strong signal 15.original host operating system. 16.Chinese/English switch supported 17.with ROHS/CE/FCC certifications,conform to 3C Safety Standard and GB12663-2001 government 18. It can support IP P2P camera Standard Configuration: 1 X BL-E99 GSM control panel 1 X Wireless PIR motion detectors 1 X Wireless door/window magnetic sensor 2 X Wireless Remote controllers 1 X Mini siren with 110DB sounds 1 X Power adapter 1 X English user manual 1 X Brand new & neutral package box
