Find Verified Electronic Siren Alarm Suppliers, Manufacturers and Wholesalers

Description
The alarm device is designed for preventing exhibits or counter samples such as jewelry,cellphone, tablet, laptop, watch, camera and cosmetic from stealing. The alarm sounds while breaking the connection of cable and removing sensor or host.

Features
I.Automatic alarm
II. Easy to install, simple to operate.
III. Built-in alarm speaker and battery is to avoid outer destruction.
IV. The speaker sounds with indicator red light flashing while removing parts or cut any lines.
V. Spring line allow customers to experience true weight and feel on display.
VI. Stand-by battery life is over 1 year.
VII. Small sensor size provides minimal interference.
VIII. Thin, reliable flex sensor doesn’t interfere with customer experience

Packing lists
One Host

Parameters
Item NO: FC158A Alarm System
Working Voltage: 3V
Working Current: 2-3µA
Bi Tone Output: 90±5 dB
Battery: CR1225
Cord Length: 50cm
Tensile Cord Length: 150cm
Wire Diameter: 0.2cm
Color: Black/ White
Material: ABS
Host Size: 4cm*1.5cm*1.5cm


Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

The alarm device is designed for preventing exhibits or counter samples such as jewelry,cellphones, tablets, laptops, watches, cameras and cosmetic from stealing. The alarm sounds while breaking the connection of cable or the removing parts of device.


Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

The security alarm stand is a flexible, scalable security system that allows retailers to secure multiple branded items such as smartphones, tablets, cameras, wearables and accessories on a single fixture or display.
Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

Description
The device is a multi target smart alarm that it make cell phone, laptop,camera, digital appliance at the same fortify. In additions, it power up and secure any merchandise with one system. It mainly work in fair trade,exhibition and retail store.
Alarm in the following conditions:
1) cut any lines
2) remove or pry the sensor or host
3) break circuit resistance
4) cut the resistance
5) USB jack disconnect


Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

Packaging Details: Carton packing for mobile security display stand
Delivery Detail: 3-10 days after getting deposit for mobile security display

Description
The alarm is a flexible security system that allows retailers to secure multiple branded items such as smartphones, tablets, cameras, wearables and accessories on a single fixture or display.
Alarm in the following conditions(in arm)
1) cut any lines
2) remove the sensor or host
3) break circuit resistance
4) cut the resistance
5) charging disconnect


Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

Description
The device is a multi target smart alarm that it make cell phone, laptop,camera, digital appliance at the same fortify. In additions, it power up and secure any merchandise with one system. It mainly work in fair trade,exhibition and retail store.

Features
I. Automatic alarm system.
II. Simple to install, use and maintain
III. 120dB alarm is loud enough to be heard in noisy environments.
IV. LED on host provides status indication
V. The speaker sounds with indicator red light flashing while removing parts or cut any lines.
VI. Force recoiler provides customers a smooth, consistent pull and flexible movement while interacting with the merchandise.
VI. Light display each port current status.
VII. Remote control to operate.
VIII. The USB facility provides charging capability.


Parameters
Item NO.: FC167B Alarm System
Working Voltage: 5V
Battery: Built-in
Bi Tone Output: 120 dB
Stand-by Current: 1.0uA
Cord Length: 50cm
Tensile Cord Length: 150cm
Wire Diameter: 0.2cm
Color: White
Material: ABS
Host Size: 16cm*10cm*3cm


Alarm in the following conditions:
1) cut any lines
2) remove or pry the sensor or host
3) break circuit resistance
4) cut the resistance
5) USB jack disconnect


Business Terms
Accepted Delivery Terms: FOB
Accepted Payment Currency: USD
Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow
Near Port: Shenzhen

SNA-360 analogue addressable photoelectric smoke/heat detectors are microprocessor controlled state-of-the-art

Detectors compatible with popular control and indicating equipment loop protocols.

Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor provide

Early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive rate-of-rise

Operation or fixed-temperature operation when the response threshold value is exceeded.

Photoelectric smoke and heat sensors
Analogue detection discrimination
Dual leds for 360° visibility
Dc 24 v operation
2-wire connection to many popular loop protocols
Dip switch address setting
125 usable detector address settings per loop
Optional remote led output

HNC-310 non-addressable heat detectors are suitable for connection to 2-wire non-addressable fire detection control

And indicating equipment, or to addressable fire detection control and indicating equipment that can accept

Non-addressable type detectors.

An electronic thermistor provides sensitive rate-of-rise operation or fixed-temperature operation when the response

Threshold value is exceeded.

Durable heat sensor
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
Dual leds for 360° visibility
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment

The 660 manual call points includes a pressure-activated displacement element to provide a safe and convenient
Way for building occupants to manually initiate a fire alarm condition.
Resetting the manual call point is achieved by inserting a key through the underside of the unit to replace the
Operating face to the quiescent position.
Pressure activated displacement element provides a safe user experience
Integral indicator to show polling and alarm activation
Resettable with simple key operation
Suitable for indoor use
Monitors for quiescent, alarm and fault conditions
Dip switch address setting
125 usable detector address settings per loop

The 640 addressable audio/visual alarm devices are suitable for connection to 2-wire addressable fire detection
And alarm systems.
640 is loop-powered and activation is initiated by a dedicated initiation message from the control and indicating
Equipment. Up to 125 devices can be connected to each alarm zone loop.
Visual, audible and audio/visual models available
Red or white body available for audible alarm device
Loop-powered from control and indicating equipment
Operates when a dedicated activation message is received from the control and indicating equipment
Loud sounder output of 85 db at 1 m
Long-life leds
Low quiescent current
Dip switch address setting

The 640 addressable audio/visual alarm devices are suitable for connection to 2-wire addressable fire detection
And alarm systems.
640 is loop-powered and activation is initiated by a dedicated initiation message from the control and indicating
Equipment. Up to 125 devices can be connected to each alarm zone loop.
Visual, audible and audio/visual models available
Red or white body available for audible alarm device
Loop-powered from control and indicating equipment
Operates when a dedicated activation message is received from the control and indicating equipment
Loud sounder output of 85 db at 1 m
Long-life leds
Low quiescent current
Dip switch address setting

Snc-300 non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection
To 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection
Control and indicating equipment that can accept non-addressable type detectors.
Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor
Provide early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive
Rate-of-rise operation or fixed-temperature operation when the response threshold value is exceeded.
Photoelectric smoke and heat sensors
Analogue detection discrimination
Dual leds for 360° visibility
2-wire and 4-wire models for dc 12 v and dc 24 v operation
4-wire model for dc 48 v operation
4-wire models available with a n/o alarm relay output
4-wire models available with auto-reset
2-wire models available with remote led output
Connects to zone monitor for use with addressable control and indicating equipment

The 460 manual call points includes a pressure-activated displacement element to provide a safe and convenient
Way for building occupants to manually initiate a fire alarm condition.
Resetting the manual call point is achieved by inserting a key through the underside of the unit to replace the
Operating face to the quiescent position.
Pressure activated displacement element provides a safe user experience
Integral indicator to show polling and alarm activation
Resettable with simple key operation
Suitable for indoor use
Monitors for quiescent, alarm and fault conditions

The 442 audio/visual alarm devices are suitable for connection to 2-wire and 4-wire fire detection and alarm
Systems.
441 will operate with both addressable and non-addressable fire detection control and indicating equipment.
Activation is initiated upon connection of the operating voltage, allowing connection to either a switched supply or
Via an addressable module.
Visual, audible and audio/visual models available
Red or white body available for audible alarm device
Operates when the supply voltage is connected to the device
Compatible with relay outputs from control and indicating equipment, or from an output module connected to addressable alarm circuit wiring
Dc 24 v operation
Loud sounder output of 85 db at 1 m
Long-life leds
Zero current load in quiescent condition

The 442 audio/visual alarm devices are suitable for connection to 2-wire and 4-wire fire detection and alarm systems.
441 will operate with both addressable and non-addressable fire detection control and indicating equipment.
Activation is initiated upon connection of the operating voltage, allowing connection to either a switched supply or via
An addressable module.
Visual, audible and audio/visual models available
Red or white body available for audible alarm device
Operates when the supply voltage is connected to the device
Compatible with relay outputs from control and indicating equipment, or from an output module connected to addressable alarm circuit wiring
Dc 24 v operation
Loud sounder output of 85 db at 1 m
Long-life leds
Zero current load in quiescent condition

Snd-500 dc smoke alarms provide battery powered smoke detection and alarm functions within a single unit.
Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire
And high immunity against unwanted alarms.
Snd-500 dc smoke alarms are battery powered, do not require a mains supply, and are suitable for general
Residential applications.
Photoelectric smoke sensor
Integrated indicator provides visual indication of an alarm condition
Test button verifies battery and alarm operation
Loud 85 db sounder to alert occupants
Single dc 9 v user-replaceable battery provides up to 18 months operation under normal conditions
30 day low battery warning signal
Interconnection function available to connect up to 38 units together
Battery missing indicator

The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm
System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be connected
To non-addressable devices when used with addressable input modules.
Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile
Cause-and-effect pc-based programming tool enables rapid customization with software for sites that
Require special operating features.
The 6001 comes standard with features that allows flexibility and expandability.
Single loop or 2-loop options available
Single loop, expandable to 2-loops available
Networkable, up to 4 control panels
Up to 125 addressable devices per loop
Automatic device detection on start-up
Automatic device type-code verification
2 independently programmable non-addressable a/v alarm output circuits
2 programmable fire alarm relay outputs
Fault relay output
Backlit lcd display providing 4 rows of 40 characters
16 zone fire alarm led indicators
3000 event history log

The 4001 non-addressable control and indicating equipment forms the central part of a fire detection and alarm
System. The 2-wire 4001 is compatible with numens non-addressable devices
The 4001 comes standard with features that allows flexibility and expandability. Default configuration programming
Facilitates out-of-box installation and rapid commissioning.
2, 4, 8, or 16 detection zones
Up to 32 non-addressable devices per alarm zone circuit
Configurable non-latching alarm zones, alarm dependency (zone coincidence detection), and output delay timer
3 access levels
Single-person test mode
Day/night mode
Manual activation of audio/visual alarm devices
Supervised auxiliary dc 24 v output
2 independently programmable non-addressable a/v alarm output circuits
2 programmable fire alarm relay outputs
Fault relay output
3 voltage-free inputs for remote reset, evacuation start/stop, and day/night mode
Supports up to 7 repeater panels

The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm

System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be

Connected to non-addressable devices when used with addressable input modules.

Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile

Cause-and-effect pc-based programming tool enables rapid customization with software for sites that require

Special operating features.

The 6001 comes standard with features that allows flexibility and expandability.

Single loop or 2-loop options available
Single loop, expandable to 2-loops available
Networkable, up to 4 control panels
Up to 125 addressable devices per loop
Automatic device detection on start-up
Automatic device type-code verification
2 independently programmable non-addressable a/v alarm output circuits
2 programmable fire alarm relay outputs
Fault relay output
Backlit lcd display providing 4 rows of 40 characters
16 zone fire alarm led indicators
3000 event history log

Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional
8 wired guarding zones for connecting wired sensors, 1 x relay outputs, can control home appliances remotely through the relay output;40 wireless guarding zones;
Sms 5 phones automatically while alarming
Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene.
Digital inputs are adopted opti cal-coupled isolators, which can prevent external high voltage from destroying internal.
Arm/disarm and program the system by phone & sms
Record function: maximum recording time:1 minute
Tamper device: arming while the control panel removing or shaking.
With standby rechargeable battery. The host automatically stores system status, while its power is off.
Packaging weight: 1.3kg
Packaging dimension: 290(l)*270(w)* 85(h) mm
Standard package included:bl-5000 mainframe x1?remote controller x2?wired mini siren x1?wireless digital keypad x1?ac adaptorx1?user manual x1;