Find Verified Electronic Semi Conductor Devices Other Components Suppliers, Manufacturers and Wholesalers

Features:
Gas concentration is digitally and quantitively
Output by means of communications
Alarm output can be set through programming
Factory calibrated, temperature compensated
Compact size, low cost

Applications:
Front-end solution for methane gas alarm
Simple methane gas alarm output

Description
Fsm-t-01 is a pre-calibrated module for methane gas alarm
Which applies tgs2611 sensor together with optimized
Classic circuit measuring methane gas concentration. The
Module is pre-calibrated by figaro's highly accurate calibration
Equipment and manufactured with mature aging process.
The purpose of the module design is to save the development
And production cost of the user to its greatest extent, making
It easier and more convenient for them to manufacture gas
Alarm for civil natural gas.

The module is designed with two different interfaces
Considering the convenience for use. Ttl level’s asynchronous
Communication interface allows the user to read real time
Gas concentrations with very simple commands;also different
Alarm thresholds can be set through communication programming.
When the gas concentration reaches set value alarm
Output signal would be generated automatically from the
Alarm terminal.

Besides , this compact sized module applies a socket type
Design which facilitates regular replacements of the sensors.
For some main board, different modules can also be replaced
Simply by plugging and pulling out, fulfilling the functions of
Detection and alarming for methane and other gases.

AR8200 Carbon Dioxide Detector CO2 Detector Introduction
This Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD.

The product features:
* As it uses the imported Carbon Dioxide sensor, it is very precise and its performance is stable.
* It uses the intellectualized design and has gotten multiple functions.
* With highlight backlight display and acoustic-optic alarming, it is easily configured.
* The embedded temperature compensation can make the meter measuring the correct value in the environment temperature of -10~40C.
* As its case is ergonomically designed, it looks handsome, feels good and is easy to carry.

AR8200 Carbon Dioxide Detector CO2 Detector Applications:
* Carbon Dioxide manufacturing workshop
* Petroleum refining and petrochemical plants
â?¢ Carbon Dioxide content detecting in trains and automobiles
* Carbon Dioxide content detecting in minerals
* Carbon Dioxide content detecting during mountain climbing and in sealed place
* Other industries and plants using Carbon Dioxide.

AR8200 Carbon Dioxide Detector CO2 Detector Technical Features
* Gas Type: Carbon Dioxide (CO2)
* Measuring range: 0 to 5000ppm
* Resolution: 1ppm
* Measuring Principle: Optics
* Display:Large LCD Display
* Operation Tempearture: -10C ~ 60C
* Operation Humidity: 0 to 99.9% RH
* Power supply: 3 x 1.5V AA battery
* Size: 182*66*32(mm)

C4E Conductivity Sensor electrode technology:
The sensor works with 4 electrodes: An alternating current of constant voltage is established between a primary pair of electrodes in graphite. The secondary electrodes in platinum regulate the voltage imposed to the primary electrodes to reflect the fouling. The voltage measured between the primary electrodes is the function of the resistance and therefore a measurement of the conductivity.

C4E Conductivity Sensor Digital Technology :
The smart digital C4E sensor stores calibration history data within the sensor. This allows a 'plug and play' system without re-calibration.

C4E Conductivity Sensor Digitally optimised measurement technology
* 4 electrode conductivity sensor (2 graphite & 2 platinum)
* Smart sensor stores configuration settings and calibration history
* Range 0-200 mS/cm
* Digital sensor - Modbus RS-485
* Robust and watertight

C4E Conductivity Sensor Applications
* Industrial effluent treatment
* Urban wastewater treatment
* Surface water monitoring
* Sea water
* Drinking water

C4E Conductivity Sensor Specification
* Measured conductivity ranges: 0-200.0 uS/cmâ??
* Resolution: 0.01 to 1 according the range
* Accuracy: +/- 1 % of the full range
* Response time: < 5 s
* Working temperature: 0'C to 50'Câ??
* Signal interface: Modbus RS-485 ( option SDI-12)
* Maximum pressure: 5 barsâ??
* Protection: IP68

-

Features
1. 6-digit 1.2inch super luminant LED display
2. 6-digit 40mm LCD display with LED backlight
3. 6-key flat membrane panel keypad
4. One configurable user-defined function key
5. One configurable software set-point
6. Supports 4- and 6-wire loadcell connections
7. Drives up to 4X350ohm or 8X700ohm loadcells
8. Built-in 6V/4.0Ah rechargeable battery

Specifications
1. Accuracy Class: III Class (eqv. to OIML R76)
2. Internal Resolution: 1 000 000 counts
3. Tare range: 100%F.S.
4. Auto-Zero range: 20%F.S.
5. Manual-Zero range: 4%F.S.

Options
1. Measurement unit switch
2. Calibration switch with seal protection
3. One full duplex RS-232 serial port
4. One RS-485 serial port
5. One RS-232 extended printer port
6. Built-in real-time clock


12pcs/carton, gross weight 27kg, 61*42*52cm

Type indoor with p2.5, p3, p4, p5, outdoor with p6, p8, p10
Configuration, all is smd
Display, size about 640mmx1280mm
Frame, size 715mmx1600mm
Brightness, for indoor more than 1200nits, outdoor more than 5500nits
Refresh, rate more than 480hz
Power, consumption max 1000w/h, min is 600w/h
Average max 400w/h, min is 170w/h


940mmx1500mmx250mm, 45kg

Long life oxygen sensor for medical, oxygen incubators, food industry, oxygen detectors
Model number: ke-25/ke-50


Features:
* long life - 2.5~10 years in ambient air
* virtually no influence from co2, co, h2s, nox, h2
* low cost
* operates in normal ambient temperatures
* stable output signal
* no external power supply required for sensor operation
* no warmup time is required

Applications:
* medical - anesthetic instruments, respirators, oxygen-enrichers
* biotechnology - oxygen incubators
* food industry - refrigeration, greenhouses
* safety - air conditioners, oxygen detectors, fire detectors020406080100120020406080100120output

Description
Gs oxygen sensor ke series (ke-12, ke-25, and ke-50) are unique galvanic cell type oxygen sensors developed in japan in 1985. Their most notable features are long life expectency, excellent chemical durability, and no influence by co2. Ke series oxygen sensors are ideal to meet the ever-increasing demand for oxygen monitoring in various fields such as combustion gas monitoring, the biochemical field, medical applications, domestic combustion appliances, etc.

Cheap carbon monoxide sensor co sensor tgs5042
Model number: tgs5042

Features:
* battery operable
* high repeatability/selectivity to co
* linear relationship between co gas concentration and sensor output
* simple calibration
* long life
* ul recognized component
* meets ul2034, en50291, and rohs requirements

Applications:
* residential and commercial co detectors
* co monitors for industrial applications
* ventilation control for indoor parking garages
* fire detection

Description
Figaro’s tgs5042 is a battery operable electrochemical sensor which
Offers several advantages over traditional electrochemical sensors.
Its electrolyte is environmentally friendly, it poses no risk of electrolyte l
Eakage, can detect concentrations as high as 1% co, operates in a
Range from -5' and +55'c, and it has lower sensitivity to interferant gases.
With a long life, good long term stability, and high accuracy, this sensor
Is the ideal choice for co detectors with digital display. Oem customers
Will find individual sensors data printed on each sensor in bar code from,
Enabling users to skip the costly gas calibration process and allowing
For individual sensor tracking. Tgs5042 utilizes a standard aa battery-sized package.

Gas leak detection in stationary fuel cells combustible gas sensor module
Model number:cgm6812--b00

Features:
* linear analog output proportional to gas
Concentration
* maintenance free
* compact size
* meets rohs requirements

Applications:
* gas leak detection in fuel cell systems
* hydrogen & combustible gas leak
Detectors

Description:
The cgm6812-b00 combustible gas sensor module is
A new unit which utilizes tgs6812, figaro's catalytic
Pellistor type gas sensor which features durability and stability.
This module provides analog output voltage proportional to hydrogen gas concentration.
Cgm6812-b00 has conformal coatings for moisture-
Proofing and electrical insulation purposes, and is also
Capable of detecting sensor wire breakage. The unit has
A wide range of operating temperature from -10' to +60'c.
Because the tgs6812 sensor can detect methane and lp gas
As well as hydrogen, this module is suitable for gas
Leak detection in stationary fuel cells which use hydrogen
Generated from combustible gases Sensor Module Cgm6812

Factory calibrated methane sensor module for methane sensor tgs2611
Model number: ngm2611

Features:
* factory calibrated
* temperature compensation circuit
* low power consumption sensor tgs2611
* compact size
* meets rohs regulations

Applications:
* residential natural gas alarm

Description
The ngm2611 is a pre-calibrated module for natural gas alarms which is precisely
Calibrated in figaro's humidity and temperature controlled facility.
The most important process in manufacturing reliable resdential gas alarms is
Adjusting the alarm point. Calibration is a complicated and time consuming
Process which also requires a substantial investment in calibration equipment. By
Eliminating the costly calibration process, this module enables users to easily and
Simply manufacture residential natural gas alarms. Figaro has taken the complexity
Out of designing a gas detector circuit by providing users with a temperature
Compensation circuit which combines a built-in thermistor and individually adjusted
Load resistor together with figaro’s low power methane gas sensor.
A connector allows easy replacement of the module for the purpose of periodic
Sensor renewal. This input/output connector enables easy installation of the
Module into the gas detectors’ mother board. This same mother board can be
Used for both methane and lpg gas detectors by simply changing the module.
This module is designed to meet the performance requirements of en50194, and ul1484.
Please refer to “technical information for tgs2611” for sensor sensitivity characteristics.
Refer to “application notes for tgs2611” for further information regarding circuit design.

FS4003/08 series mass flow sensors are designed for general purpose flow monitor and control applications, and are made with world leading proprietary MEMS mass flow sensors and the smart electronic control system. The sensors directly measure mass flow in the designed channel with a low pressure loss. These sensors can readily be applied for electronics flow meters for anesthesia equipments, clean room air flow or nitrogen flush monitor and control, environmental equipments such as air sampler, analytical instrumentation such as GC spectrometer.

FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments. Applications include electronic flow meter for anesthesia equipments, clean room gas flow monitor, air sampler, and gas analyzer.

Features and Applications
- Designed for 3 and 8 mm package
- Mass flow detectable from 0 ~ 2 SLPM to 0 ~ 50 SLPM
- Exchangeable connectors for easy installation
- Digital and analog output provide easy access for various communications
- Compact design ready for multiple channel assembly
- Excellent for electronic meters in anesthesia equipment
- Fast response and low power consumption
- Low pressure loss

FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration. The sensor can measure air flow up to 10 m/sec with a fast response. The compact design make the installation an easy task. Examples are clog sensing in LCD projector; HVAC air flow monitoring, air fresher and fan status monitoring.

Features and Applications
- Measure open space air flow up to 10 m/sec
- Fast response < 20 msec
- Compact miniature design
- Excellent sensitivity
- Bi-direction capability
- Additional customization available

FS5001B series mass flow sensors are designed for general purpose flow monitoring and control applications. The sensors directly measure mass flow in the designed channel with trace flow detection capability. The lowest flow it can detect is 20 uL/min. These sensors can readily be applied for manifold flow assembly, leak detection, HVAC control, clean room air flow or nitrogen flush monitoring and control, environmental equipments such as air sampler, analytical instrumentation such as GC spectrometer.

FS5001 can be configured to measure flow full scale from 100 sccm to 1000 sccm (1 SLPM). With a full spectrum of customizable adaptors, it can be plug-and-play in many applications.

Features and Applications
- Low mass flow detectable from 0 ~ 200 sccm up to 0 ~ 1000 sccm
- Outstanding accuracy of 2.0%
- Response time < 10 ms
- Pressure rating up to 5 bar (73 psi)
- Output: analog or both analog and digital

Dimensions 2080l×680w×1400h(mm)
Quantity One set/sets
Equipment structure In multistorey structure
Functional features This equipment dedicated to aging test bulbs, observation whether energy-saving lamps
For short circuit, blasting capacitance, black, etc. Simple operation, simple and convenient
The basic configuration and structure:
1. Machine body The frame adopts 40 * 40 aluminum profiles produced, is divided into 4 layers, each
Layer height is about 280mm.
2. Frame table Using 15mm compression plate cushion, the surface with white fire board, and
Installation e27 aging lamp holders , each layer can be also placed 120 led bulb
Lamp.Total of 480 pieces of led lamp holder .
3. Output The aging rack disposable and aging of the 480 led bulb lamp
4. Casters Installation of 4 pieces 2 inch wheels, two vientiane vientiane, two with brake, the convenience of customers to move .
5. Color The whole set of equipment for the the color of the aluminum.
6. Switch impact The time relay, open, close the impact time according to customer requirements.

Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.

This sensor is an ideal product for automatic room air monitoring system such as an air purifier.

Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.

Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.

The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.

Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection

Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device

Pdsm010 particle sensor module product specification
* supply voltage: 5v â± 10%v
* supply current (@ 5v): < 85ma
* storage temperature range: -20 ~ 80'c
* operating temperature range: -10 ~ 65'c
* operating humidity range: < 95%rh

Automatic Full Color P5 Indoor Led Sign Display High Definition






Led digital signage displays are the perfect combination of science and technology and media, and they can fully display the illusion, science and technology, fashion and trend and become the new power in the present market. At present, KTV, bar and hotel all are equipped with high definition indoor led displays, and outdoor full color signs have taken up over 80% of the market shares in the outdoor media advertising field.



Performance Features of P5 Indoor Led Sign Display:

1. Regularly turning on and off the led sign display: This function can be realized through a timer.

2. Light sensitivity: D-King P5 led displays signs can automatically adjust the brightness of the display sign according to the strength of the outside light, so that no matter in the day time or night, the content on the signs can be clearly seen.

3. Temperature sensing: A temperature detector is used to sense the temperature of the outside environment and inside the led sign display, and the software can be set to automatically control the switch of the fan and air conditioning.

4. Industrial personal computer to control the display sign boards: The IPC has a small size and light weight, which is convenient for frequent move.

5. Kilomega technique: with kilomega technique, there will no frame extraction.

6. Arbitrarily setting the refresh rate: The refresh rate can be arbitrarily set from 10HZ to 3000Hz.

7. Super long transmission distance: The transmission distance can reach as long as 170m.

Wooden box or flight case

Dual Twin Engine Top Mount Binnacle Remote Control for Yamaha
Part no.: 704-48207-P1-00
This control gives you externally-adjustable throttle friction and exceptionally smooth
throttle friction and exceptionally smooth operation. The thumb-operated trim/tilt switch
and neutral warm-up button are conveniently located on a handle accented with polished chrome.

PCBA Capability

Capability - SMT

Lines

9 (5 Yamaha, 4 KME)

Capacity

52 million placements per month

Max Board Size

457 X 356mm. (18 x 14)

Min Component size

0201 54 sq. mm. (0.084 sq. inch), long connector, CSP, BGA, QFP

Speed

0.15 sec/chip, 0.7 sec/QFP

Capability - PTH

Insertion Type

# of Lines

Capacity (points/mth)

Max Board Size

Lead Pitch

Jumper Wire

3

6 million

330X250 mm (13 x 9.8)

5-30 mm

Axial

3

6 million

457x559 mm (18 x 22)

5-20 mm

Radial

3

9 million

457x559 mm (18 x 22)

0.36-21.5 mm

Wave Soldering

Wave Soldering

2

Max board width

400 mm

Type

Dual wave

Pbs Status

Lead-free line support

Max temp

399 degree C

Spray flux

add-on

Pre-heat zones

3

Base material: FR4, aluminum, Rogers, PTFE flexible PCB
Copper thicknesses: 0.5-6oz
Board thicknesses: 0.4-6.0mm
Minimum hole size: 0.25mm
Minimum line width: 0.12mm
Minimum line spacing: 0.12mm
Surface finishing: HASL, gold, silver and OSP
Yamaha highly accurate placer production line
1 to 22-layer mixed assembly technology, specialized in assembling boards for safety, industry control and power boards
PCB or PCB assembly file requests:
Gerber files of the bare PCB board
BOM (bill of material) for assembly
Testing guide and test fixtures if necessary
Programming files and programming tool if necessary
Our advantages:
Our professional engineer can provide PCB design, BOM list and final testing
Quick and economic delivery term
Double layers FR4 sample assembly will be finished in one weeks
Provides PCB and PCBA prototype, medium and low volume quick board services

UV-LED light source machine Main applications:
1. hard drive head assembly (head of packaging, the line is fixed, bearings, coils, chip bonding, etc.)
2. motors and components assembly (wire coil fixed coil end fixed, PTC / NTC element bonding,
protecting the transformer core)
3. DVD / digital camera (lenses, lens attached, circuit board reinforcement)
4. sensor production (gas sensors, photoelectric sensors, fiber optic sensors, photoelectric encoder, etc.)

5. phone components assembly (camera lens, earpiece, microphone, housing, LCD modules, touch
screen coating, etc.)
6. TFT-LCD LCD panel irrigation crystal interface package
7. TFT-LCD LCD panel FPC paste package
8. Yung-touch fitting cured
9. PCB industry LED VU light curing applications
10. optical industry -ST-LED UV light curing applications UV curing applications
11. laser package
12. optics assembly (lens group, prisms, DLP light engine assembly, CCD, COMS)
13. optical communications industry yuan source device (PLC splitters, WDM WDM, array waveguide
gratings AWG and other glass packaging structural bonding or potting, etc.)
14. research and institutes -ST-LED UV light curing applications
15. Medical Devices curing applications


N.O.

An improved surface mount remote control provides better boating performance and reliability. The BRP remote control is designed for more positive shifting and smoother throttle operation. The remote control handle features an exclusive design enabling right or left-hand installation along with a new thumb operated trim switch that is easier to use. The kit includes a key switch, emergency lanyard, warm-up lever, start-in-gear prevention switch, neutral lock and throttle friction adjustment, and warning horn.

This control works with 1996 and new outboards. This control can be used on 1973-1995 motors with the purchase of wiring harness adapter part number 0768411 (768411 replaces prior part number 176711).

Please check with the Manufacturer and verify that this is the part you need. It is your responsibility to order the correct part. We will ship exactly what is ordered. Please make sure it is what you want before ordering
Size: 5" X 8 3/8" X 5 3/8"
Boat part number 8601130 is a new OEM prewired side mount remote control for Larson Boats, part number 4331-8994 . Manufactured by Evinrude / Johnson, part number 5006180 .

Features:
Neutral Lock
Trim/tilt switch
Ignition switch with safety lanyard
"Start In Gear Prevention" Switch
Warning Horn
Adjustable Throttle Friction
Pigtail Wiring Harness (Correct ignition wiring harness must be ordered separately)
Compatible with Evinrude Johnson cables and outboard engines 1996 and newer
May be used with 1973-1995 motors with harness adapters, not included
Specifications:
Boat Manufacturer: Larson Boats
Part Number: 4331-8994
Part Manufacturer: Evinrude / Johnson
Part Number: 5006180