The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB circuit board. It is based on the fluxgate technology and can realize the isolated measurement of DC current and AC current. Measuring range: from ±6A to ±50A. Accuracy: ±0.8%. Linearity: ±0.1. Supply voltage: ±5V. Operating temperature: -40°C~80°C. Bandwidth (3dB): 300kHz. Response time: 3us.
The CIT series high precision split core current transducer is developed by Hangzhi based on the fluxgate technology and can realize the isolated measurement of DC current and AC current. Measuring range: from Ã?±100A to Ã?±1500A. Accuracy: 0.05%. Linearity: 0.02%. Hole diameter: 40mm. Zero offset current/I: Ã?±30uA. Operating temperature: -30Ã?ÂÃ?°C~75Ã?ÂÃ?°C. Bandwidth (3dB): 350kHz. Response time: 2us. The non-intrusive installation of a CIT split-core fluxgate current transducer is one of its key advantages. There is no need to disrupt the circuit by simply clamping the device around the conductor, making it a feasible alternative for monitoring existing systems without generating downtime. These transducers are used in a variety of applications, including power distribution, energy management, industrial automation, and others. They are critical in allowing for efficient energy use, monitoring electrical systems, and guaranteeing safe and reliable operation.
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current flows, the primary current is measured by detecting the symmetry of the saturation point. The BMS series is suitable for battery monitoring systems that require high accuracy and low offset. It can realize the isolation measurement between the primary current (high voltage) and the secondary current (12V system).
AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Key Technologies Excitation closed-loop control technology Self-excitation demagnetization technology Multi-point zero-flux technology Temperature control compensation technology Multi-range automatic switching technology Features Insulated measurement between primary and secondary side Excellent linearity and accuracy Extremely low temperature drift Extremely low zero drift Broad band and low response time Strong anti-electromagnetic interference Application Domain Medical Equipment: Scanner, MRI Rail Transit: EMU, Metro, Trolly car Power industry: Converter, Inverter Ship: Electric driven ship Renewable Energy: Photovoltaic, Wind energy Car: Electric car Testing Instrument: Power analyzer, High-precision power supply Smart Power Grid: Power generation and battery monitoring, Medium low voltage substation Industry Control: Industrial motor drive, UPS, Welding, Robot, Hoist, Elevator, Ski lift
Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200ppm (200 parts per million). The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux and AC flux, and can detect high-frequency ripple by constructing a high-frequency ripple sensing channel, so that the transducer can achieve high gains and measuring accuracy over the full bandwidth.
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC600A, AC424A, Overload Capacity: DC720A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 3000:1, Secondary Burden Resistance: 2 ~ 5�©, Accuracy: 0.05%, Linearity: 50ppm, Current Change Rate: 100A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC200A, AC141A, Overload Capacity: DC240A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 2000:1, Secondary Burden Resistance: 10 ~ 25, Accuracy: 0.02%, Linearity: 20ppm, Current Change Rate: 200A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-precision digital current sensor provided by Hangzhi for the above equipment plays a key role in the measurement of current in its process control. The digitalized data output reduces the difficulty for customers to collect current signals and greatly reduced the cost of the customers.
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range: ±1500A Output signal: standard 0-10V voltage signal Accuracy: 50ppm (Parts Per Million) Linearity: max 20ppm; Time stability: 0.5ppm/month; Temperature stability: 0.5ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: di/dt=1.5V/us.
JT-KL gas alarm Description JT-KL gas alarm is a kind of wall-mounted household gas alarm designed to detect the concentration of combustible gas or vapors using high quality air-sensitive component and manufactured with advanced technology. It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents. JT-KL gas alarm Features Sensor lifespan7 years High sensitivity and fast response Easy installation Compliance with EN50194-1:2009 JT-KL gas alarm Application It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents. JT-KL gas alarm Specifications Model JT-KL Working voltage AC220V+15% 50Hz PowerConsumption 11.2W Environment Temperature: -10 C 55 C, Humidity:
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tube detectors 10 Tube No.: 10 Gas to be measured: Nitrogen oxide(NO) Measuring Range: 2.5-200ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us . Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Automation products, pressure sensors, big andon displays .
Air Fuel Ratio Sensor for Automotive (AF series) 1000+ OEM & IAM part number reference 600+ application 50+ connector available Product Description - - Made in Taiwan - General in Japanese make automobile - New generation of four wire oxygen sensor - Ceradex single cell air fuel planar technology Advantage - - Patented know how of processing the core ceramic element to achieve excellent signal response. - Sensor components as well as raw materials are sourced from OEM suppliers and world leading companies. - 13 month warrantee from shipping date. Full range specification of sensor core ceramic element made in Taiwan! Premium Quality - - 100% simulation bench test via in house designed quality control equipment calibrated by SGS & CLS. - Multiple test and check station integrate within production outline ensure the highest quality and stability. - Every sensor manufactured go through function inspection and seal leakage test before dispatch. Taiwan Professional Automotive Sensor Manufacturer! Professional Service - - Two export point - Consolidation flexibility - Custom box / bulk packaging - Tailored instruction sheet - Custom label & bar-code - Product engraving - Product laser imprint 25 years of experience research and selling of oxygen sensor, export to 50+ countries worldwide! Certification - - IATF16949 certified by SGS (Automotive quality management system) - ISO9001 certified by SGS (quality management system)
Sensors, electrical switches.Manufacturer
Ultrasonic level meter, liquid level switch, gases detection, fire detector, weighing load cell sensor.
Float level switches, proximity sensors, thermal sensors, flow sensors, PCB mount sensors, high security door switches, explosion-proof magnetic proximity switch.
Urinal sensor flusher, automatic sensor tap, automatic hand dryers, automatic door system, photo electric sensor, automatic pump controller.Installation of quality automation products, after sales service of bpe products
Electrical isolation AC, DC sensors.
Abs sensor; pdc sensor; parking sensor.
Pcba manufacturing, electronic components like mcu, sensor, triac, igbt .Manufacturing
