The EQ core design is derived from the ER and PQ. The range is optimized for use in compact AC/DC notebook adapters and DC/DC converters. For instance, the EQ30 has the capability to handle a power range of 50 to 70 W (fl yback topology) in an enclosed casing of a notebook adapter or 100 to 150 W in low profi le DC/DC converter . The advantages of EQ cores are a simple core shape, round centre pole, high Ae value , a large winding window, low profi le and a large surface area for heat dissipation.
The ETD core design is a further development of E cores. They are optimized for use in SMPS transformers with switching frequencies between 50 and 200 kHz. The designation ETD (Economic Transformer Design) implies that this design achieves maximum throughput power related to volume and weight of the total transformer. Shielding is somewhat improved compared with E cores. The matching coil formers are suitable for many winding types and can be handled on automatic equipment.
Economic Flat Design (EFD) power transformer cores offer a signifi cant advance in circuit miniaturization. Their low build height and high throughput power-density make them ideally suited to applications where space is at a premium. Throughput power of a ferrite core transformer is essentially proportional to its volume. So the transformer is one of the main limitations in a DC-DC converter's size. Now, with the introduction of the EFD system, a signifi cant reduction in transformer core height has been achieved. EFD transformer cores combine both extreme fl atness with a very high throughput power-density for frequencies up to 1 MHz and higher. Every transformer, based on the EFD range, has a lower building height than any other existing low-profi le design with the same magnetic volume. This is achieved by placing the centre pole of the core always in the centre of the fi nished transformer, thus making maximum use of the winding area.
The PH core range consists of potcore halves specially designed for use in proximity switches. Their shape is derived from the IEC standard P-core range. Outside diameters are adapted to fi t standardized sizes of proximity switch housings. Since the cores are used as halves, their height is increased to accommodate the winding. A complete range of coil formers is available.
The EP/LP core range was specially designed for wideband transformer applications where low build height is a must. The board area occupied by the assembly is almost a square, allowing high packing densities on the PCB. The bobbins have two rows of pins allowing easy design of multiple output transformers. Cores are available in high permeability materials, including the new low THD material 3E55, for wide band transformers and in power materials for small power transformers.
Rated voltage:72.5kV Power frequency test voltage:140kV 1min Lightning impulse test voltage:350 kV Power:50 kVA Rated frequency:60Hz Creepage distance: 31mm/kV, 2248mm Arcing distance:655mm
Eddy-current testing (also commonly seen as eddy current testing and ECT) is one of many electromagnetic testing methods used in nondestructive testing (NDT) making use of electromagnetic induction to detect and characterize surface and sub-surface flaws in conductive materials. The two major applications of eddy current testing are surface inspection and tubing inspections. Surface inspection is used extensively in the aerospace industry, but also in the petrochemical industry. The technique is very sensitive and can detect tight cracks. Surface inspection can be performed both on ferromagnetic and non-ferromagnetic materials
Distribution Transformers, Power Transformers, Furnace Transformers, Rectifier Transformer
Transformer Lv And Hv Bushing parts used in Current, Voltage, Instrument Transformers, CT/PT/IVT Units & Tapchanger
Model NO.: EI25 Usage: Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer, Iron Core for Transformer Frequency Characteristics: Low Frequency Shape of Core: Customized Brand: No brand Core Material: CRGO Silicon Steel Core Output Voltage: Customers Requirement Input Voltage: Customers Requirement Winding Material: Copper\Aluminum Place of Origin: Guangdong, China (Mainland) Frequency: 50-60Hz Customized: Yes Advantage: Quick Delivery Price: Negotiable Transport Package: Customization Specification: customized
Ashwa Shakti Engineers Pvt Ltd; Bengaluru has follwing used Transformers for SALE. 1) 200 KVA 11 Kv/433 V Aluminium Winding.-1 No 2) 250 KVA 11 Kv/433 V Copper winding.-1 No 3) 315 KVA 11 Kv /433 V Copper Winding-1 No 4) 3500 Kgs M4 Grade 0.27 mm thick CRGO Lamination of 5 MVA 33/11 KV 5) 7000 Kgs M4 Grade 0.27mm thick Lamination of 10 MVA 110/11 KV
aiia is specialized in manufacturing Single-Phase Isolating & Safety Transformers from 20VA to 5kVA and three-phase transformers from 100VA to 500kVA, for applications in different fields from industrial to automation to photovoltaic to marine. The transformers offer good access to the four-hole fixing, finger-proof terminals, and full varnish impregnation to protect against humidity.
The power supplies is a highly reliable, 36W 12V 24V wall-mounted style single-output AC DC Power Adaptor series. This Class 2 Power Supply 36w is equipped with an AC plug USA type and Class 2 rated without earth pin, accepting the universal AC input voltage range. Featuring the working efficiency of level VI, low no-load power consumption below 0.075W, wall plug in Power Supply 24V is compliant with the latest USA energy regulation. Universal Ac Dc Adapter provides safety protections for over current, over voltage and short circuit.
1.Features: Double-screw fastening, safe, easy to install, portable Wide inner window, allowing clamping of big cables or bus-bars Wide range of sizes to accommodate all the existing installations 2.Application: Current measurement, monitoring and protection for electrical wiring and equipment. Current and power measurement for electric motors, lighting, air compressheating and ventilation system, air-condition equipment and automation - control system. Current, power and monitoring device. Relay protection device. Company introduction 1.certification We have passed ISO9001:2015,CE,SGS approval and IEC report 2.Company profile Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future. 3.Shipping: (1)Products are shipped via UPS / DHL / EMS / HK EMS / FedEx / TNT and so on expresses (door to door). (2)We Provide Drop shipping Service. (3)20 days around delivery upon receiving payment if the qty is lower than 1000PCS and it is not customized products. (4)Shipping via EMS. UPS. FedEx and TNT express usually takes 3~7days dependent on the destination country. 4.Payment terms: (1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before delivery. (2) By irrevocable L/C at sight, to be issued immediately against confirmed order. (3)Payment by T/T, if order amount is less than USD 20,000. 5.Warranty: (1)We provide 1 year warranty. (2)If the product is defective, please notify us within 3 days of delivery. (3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods
ISI marked, High Quality, Energy Efficient and Reliable Distribution Transformers upto 33 kV class; ranging from 10 kVA to 5000 kVA.
We manufacture transformer bushings for outdoor and indoor applications and our manufacturing program includes the following ranges : 1. Low voltage bushings in accordance with DIN 42539 - 1 kV , 250 A Low voltage bushing AB-250 - 1 kV ,630 A Low voltage bushing AB-630 - 1 kV ,1000 A Low voltage bushing AB-1000 - 1kV, 2000 A Low voltage bushing AB-2000 - 1 kV,3150 A Low voltage bushing AB-3150 2. Medium voltage Bushings in accordance with EN50180 & DIN42531 - 12.5kV,250A Indoor type transformer bushing 10Ni-250A - 12.5 kV,250A Outdoor type transformer bushing 10Nf -250A - 24 kV ,250A Outdoor type transformer bushing 20NF-250A - 36 kV,250A Outdoor type transformer bushing 30NF-250A
The Iron Based Amorphous Ribbon is made by the composition of 80%Fe, 20%Sic and B-metal elements materials and formed by strip-casting technology. With high permeability, low loss and ideal stability, it can meet modern electronic product's requirements in high frequency, large current, small size and energy saving, and can also replace silicon steel, perm alloy and ferrite in electricity utility and electronic products. Performance Advantages & Feature R High saturation flux density-- to reduce winding turns, minimize product size R High resistivity, low coercivity--to improve production performance R Low loss(1/3 to 1/5 of silicon sheet)--to cool temperature, improve efficiency R Low excitation--decrease no-load current, and noise R Adjustable permeability--adopt different heat treatment process according to different requirement R High temperature stability--long-term operation under 130° C
newest transformers 2018 transformers for sale Product Introduction The oil immersed amorphous transformer is an ideal replacement of the traditional silicon steel core transformers,which is widely used in outdoor power distribution system.Mass utility of this type of transformers will acquire good good energy-saving effect and reduce environmental pollution. newest transformers 2018 transformers for sale Performance Advantages & Feature R low running noise and higher reliability---adopting our invention patent technology. RFully sealed structure---applicable for humid environment,regions in short of electricity,large load fluctuation and difficult to do regular maintaining areas. RImproving impulse distribution of winding---all HV winding adopt multi-layer cylinder structure. RGood anti-short circuitability ---uniformly-distributed ampere-turns. RInstalled locating parts---avoid displacement in transportation. RBeautiful appearance,small volume and occupation for installation---ideal product with good quality and free maintenance.
Amorphous Metal transformer core Performance Advantages & Feature miniaturizing and lightening of the transformers, decreasing the direct cost, assemble easily and quickly, greatly improved the production capacity and reduce the noise at the same time. R Raw material: Zhongyue Amorphous J1K101 iron based amorphous ribbon(width:120 mm, 140 mm,170 mm,213mm� R Flux density: 1.25~1.35 Tesla R Material density: 7.18 g/cm³ R Low excitation--decrease no-load current, and noise R Lamination factor: no less than 86%
66KV series product line has found a far-flung avail not only in agricultural grid modification within urban and rural areas, but also in industrial or mineral enterprises. Till now, the corporation has formed its series and commercially scaled production and the product line runs well and thereby is highly appraised by our popular users. ã??ã??The transformer body is reliably positioned for ensuring that no dislocation occurs with the transformer and no deformation occurs with the windings during long-distance transportation or during long-term operation. Without the need of core suspension and being maintenance free, this product line may be used just via direct grid connection
