Compliance with 80 plus standard, efficiency 80%+
Support intel core i3, i5, i7, amd phenom and athlon
Dual-switch forward converter design
m load 115v ac/60hz or 230v/60hz
Dimensions: 150 x 140 x 86mm
Mtbf: 100k hours
Output rise time: 0.2 to 20ms
Pg signal rise time: less than 1ms
Dimensions: 150 x 140 x 86mm
Mtbf: 100k hours
Output rise time: 0.2 to 20ms
Advantage
Quick and easy installation in vehicles of every type.
Supports most used models too
Only short down-time (off-operation) period
Proved and tested system
Easy and accurate reading of engine fuel consumption
No extra maintenance necessary
Tamper-proof measurement
Low installation costs
Quick and easy installation
Short down-time of vehicle only
Quick pay-back period
We are trading in product of power transmission line hardware fittings. Manufacturing/ forged department is our sister concern part that is why we are able to give you best quality and competitive rate.
Our product ranges are 33kv to 400kv. But we are able to provide you all hardware as per your requirement (product load, map-size, drawing, etc…)
We are able to provide you our entire product with all standard testing and/ or as per your requirement.
.
Our products size are depend on particular requirement. It is 33kv to 400kv. That is why size is different.
Rbcm coriolis masas consisted of a pair of bended tubes. The principle is to detect coriolis force forced a pair of tubes from inner mass flow by fluid. Rbcm coriolis mass flow meters offer direct mass flow, volume flow, density, and temperature measurement of liquids and slurries ¡ª without the need for additional equipment, manual calculations, or estimations.
Features
Measurement medium: liquid, gas, solid, or two phases and three phases mixed fluid
No moving parts, high reliability and durability
Measurement of mass flow, density, temperature and volume flow
Free of dead spots
Temperatures up to +350
Work pressure º(0~32) mpa main technical parameters
Inverter system - high quality output 6.5kw, split style
Can run any electronic equipment directly
Rare earth permanent-magnet alternator
6.0 hrs. At rated load per tankful ( 19l )
Compact & lighter weight only 66kg
Recoil & electric starter with battery
Load 2x3p air conditioner working
Genset model lg10000i-s
Rated output power ( kw ) 6.5
Rated current ( a ) 28.26
Ac output 230v, 50hz, single phase, pf=1.0
Dc output 12v-8a
Alternator type rare earth permanent-magnet, 100% copper winding dual-alternators system
Voltage regulator inverter
Intelligent protection system overload, short circuit, low voltage, high-temp.
Engine model lg190fe ( 13hp )
Engine type 4-stroke, single-cylinder, ohv gasoline engine
Displacement ( cc ) 420
Fuel consumption ( l / h at 80% load ) 1.2
Starting system recoil & electric start with battery
Packing size ( lxwxh ) ( mm ) 585 x 510 x 590 ( brown carton packaging )
Net / gross weight ( kg ) genset: 55 / 58 ( inverter unit: 11.5 / 12 )
Qty 20 gp / 40 gp ( sets ) 150 / 320
Contact via: ligerpower(at)foxmail, com
21422 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
Inverter system - high quality output 6.5kw, +ats
Can run any electronic equipment directly
Rare earth permanent-magnet alternator
6.0 hrs. At rated load per tankful ( 19l )
Compact & lighter weight only 70kg
Recoil & electric starter with battery
Load 2x3p air conditioner working
Automatic transfer system ( ats )
Manual & automatic start & stop the generator
Automatic transfer between main power & generator power
Automatic protection:
Fail to start
Under generator voltage
Low oil pressure
Low battery voltage
Both manual & automatic operation
Genset model lg10000i-acts
Rated output power ( kw ) 6.5
Rated current ( a ) 28.26
Ac output 230v, 50hz, single phase, pf=1.0
Dc output 12v-8a
Alternator type rare earth permanent-magnet, 100% copper winding dual-alternators system
Voltage regulator inverter
Intelligent protection system overload, short circuit, low voltage, high-temp.
Engine model lg190fe ( 13hp )
Engine type 4-stroke, single-cylinder, ohv gasoline engine
Displacement ( cc ) 420
Fuel consumption ( l / h at 80% load ) 1.2
Starting system recoil & electric start with battery
Packing size ( lxwxh ) ( mm ) 585 x 510 x 590 (colorful carton packaging )
Net / gross weight ( kg ) genset: 55 / 58 ( control box: 15 / 17 )
Qty 20 gp / 40 gp ( sets ) 135 / 320
Runner diameters: 0.35-2.5m
Suitable water head: h=10-300m
Capacity of the generator unit: 160-20000kw
The speed range of the turbine: 150-1000rpm
The power output ranges from 160kw to 20000kw, runner diameters are between 0.5 and 2.5 meters.
The speed range of the turbine is from 150 to 1000 rpm.
excellent peak efficiency.
high efficiency also at partial water flow down to about 50%.
2 or 4 bearing gen-set arrangements.
bearings rated for more than 100 000 hours of operation.
guide vane control electrically or hydraulically.
complete range of specific speeds for runner design allows optimized matching to synchronous speed.
Nitrogen generator produce high purity n2 for inflating tyres, with inflating with n2, you can get:
1, longer term stability of the tyre pressure
2, better grip and handling
3, reduced fuel consumption about 2-10%
4, longer tyre life about 25%
5, enhanced safety
6, more economy
Pro user 2 stroke generator with electronic ignition and recoil start:-
A versatile generator for general use. Perfect for low watt power tools, lighting, caravanning and camping.
This compact generator weighs 18kgs to help show its quality and durability yet still light enough and easy to carry.
Being a 2 stroke engine means you have to mix the petrol with 2 stroke oil. Ordinary unleaded petrol you get from any petrol station and 2 stroke either from motorbike shops, garden machinery centres or good motor factors.
The mixture is 50 to 1. That's 50 parts petrol and 1 part of 2 stroke oil. So the measurement is for 1000ml (1 litre) of petrol you have to mix 20ml of 2 stroke oil.
Specification
• 850w(max) output
• single phase
• 2 stroke easy start engine
• 240 volt ac
• recoil cord starting
• on/off switch
• re-set button
• ac output socket uk socket
• carrying handle
• 4 litre fuel tank
• 2 stroke oil measuring cap
• noise level 65db @ 7 metres
• 13 amp socket
• 5.8 hours approx running time
• dimensions: 390mm l x 330mm w x 330mm h
• weight: 18kgs
Compact, Efficient and Versatile with the Following Specification
This generator in dry form with no oil or fuel weighs nearly 45 kgs to help substantiate its quality and durability.
These are used for camping, building sites, marinas, on boats, motor homes, caravans, back up for houses, the list is endless.
With a running time of between 9 to 11 hours from a full tank makes this a very efficient way to produce electricity.
Please note that the three phase and single phase cannot be run at the same. It can only be 415v or 240v and not both. To change phases simply move the change over switch to the correct voltage. It is to be used for domestic purposes only. Yes it can be used commercially but has no commercial warranty.
Specification:
• Brushed Single Phase & Three Phase
• 50Hz
• Air Cooled Single Cylinder OHV 4/Stroke Engine
• Rated Power 3Kva on 3 phase
• Rated Power 1Kva on 1 phase 2.8
• 16 amp 240 Volt AC socket (blue socket round 3 pin)
• 16 amp 380 Volt AC socket (red socket round 6 pin)
• 12 Volt DC connection @ 8.6amp
• Power Factor 1.0
• Displacement 196cc
• Speed 3000 rpm
• Maximum Output 6.5 hp
• Recoil Starting System
• Power: 7.8 amp @ 380v, 4.2 amp @ 240v
• 15 Litre Fuel Tank Capacity
• Working Time Per15 Litres 11 to 9 hours
• Dimensions: 595 x 425 x 435mm approx
• Weight 45kgs approx
• Noise (7 meters away) < 67 (db) (0 meters) < 95(db)
We may supply the machinery the some models (mini water pump, gasoline engien and generator, as well as farmer tools) of farmer machinery (reap machine, mobile sprayer, multi-function power tiller, bar of shaking and milling, movable paddy and wheat thresher)
Technology of okay energy
1) patentedintegration ofwater electrolysis cellforming
2) patented electrolysis power supply based scm
2.1 constant current controlby temperature feedback control
2.2 current adjust byuser to meet the constant flux ofoxy-hydrogen gas
2.3 efficient energy conversion (ac to dc) based igbt
2.4 specialcooling design forworking24hours continues.
3) patented multi-layer anti-firewater seal technology
4) automatic water level detection technology
5) water automatic replenishmenttechnology
6) high-efficiencygaswater separatortechnology
7) electrolyte-automatic cycletechnology.
Model number Oh60
Ac voltage requirement (v)220/110
PhaseSingle
Dc voltage 24v
Max gas output60l/h
Max. Working pressure (kg/cm2)1.3
Max. Water consumption (l/h)0.06
Water feedManual
Max. Flame modifier consumption (l/h)0.05
Flame modifier feedManual
Dimensions - l*w*h (mm)530*330*430
Gross weight (kg)15
Ventilation space requirement (mm)200 in each direction
Packing:1 set / wooden case
Technology of okay energy
1) patentedintegration ofwater electrolysis cellforming
2) patented electrolysis power supply based scm
2.1 constant current controlby temperature feedback control
2.2 current adjust byuser to meet the constant flux ofoxy-hydrogen gas
2.3 efficient energy conversion (ac to dc) based igbt
2.4 specialcooling design forworking24hours continues.
3) patented multi-layer anti-firewater seal technology
4) automatic water level detection technology
5) water automatic replenishmenttechnology
6) high-efficiencygaswater separatortechnology
7) electrolyte-automatic cycletechnology
3.Application of okay energy oxyhydrogen generatorokay oxy-hydrogen generator has successfully applied in ampoules melt sealing, platinum resistor welding, air-condition welding, musical instrument welding, varnished wire welding, steel plate cutting, thermocouple welding, quartz glass tube sealing, water injection wiredrawing sealing, storage battery welding, pharmaceutical glass tubes sealing, automobile engine carbon removal and other fields.At the same time, it is often used in jewelry welding, acrylic polish , hook welding, spectacle frame welding, waxy film repair, mould repair, etc.
Model numberOh300
Ac voltage requirement (v)220/110
PhaseSingle
Dc voltage ¤t (a)5v 60a
Max gas output300l/h
Max. Working pressure (kg/cm2)1.3
Max. Water consumption (l/h)0.17
Water feedManual
Max. Flame modifier consumption (l/h)0.15
Flame modifier feedManual
Dimensions - l*w*h (mm)780*280*520
Gross weight (kg)38
Ventilation space requirement (mm)200 in each direction
Packing 1 set / wooden case
Technology of okay energy
1) patentedintegration ofwater electrolysis cellforming
2) patented electrolysis power supply based scm
2.1 constant current controlby temperature feedback control
2.2 current adjust byuser to meet the constant flux ofoxy-hydrogen gas
2.3 efficient energy conversion (ac to dc) based igbt
2.4 specialcooling design forworking24hours continues.
3) patented multi-layer anti-firewater seal technology
4) automatic water level detection technology
5) water automatic replenishmenttechnology
6) high-efficiencygaswater separatortechnology
7) electrolyte-automatic cycletechnology.
Model numberOh200
Ac voltage requirement (v)220/110
PhaseSingle
Dc voltage ¤t (a)5v 60a
Max gas output200l/h
Max. Working pressure (kg/cm2)1.3
Max. Water consumption (l/h)0.11
Water feedManual
Max. Flame modifier consumption (l/h)0.1
Flame modifier feedManual
Dimensions - l*w*h (mm)620*280*360
Gross weight (kg)33
Ventilation space requirement (mm)200 in each direction
1 set /wooden case
Oxy-hydrogen gas Generator consumes water and electricity, electrolyze water into H2 and O2, we can use H2 and O2 as source of flame replacing acetylene or natural gas or other fuel. It can be used for welding, cutting, polishing, brazing, glass processing and jewelry processing. Also can burst with other fuel together for heating.
Multi-functions application:
1. Gas welding and flame spray painting.
2. Welding, mending, repairing, kinds of jewelry made of platinum, gold, silver, copper, stainless steel etc of Jewelry Industry.
3. Direct fusion and welding, enameled wire, computer wire peeling, welding LED wafer, flame-treating circuit board of Electronic Industry.
4. The thermal processing of glass and quartz glass.
5. Organic glass Polishing.
6. Welding metal fittings and mending sand holes in dentistry, no-carbon flame disinfection.
7. Quartz glass tube Sealing and etc. Ampoules bottles Sealing.
8. Welding or heat treating small metal parts.
9. Carbon Steel Cutting, continuous casting slab cutting.
10. Removals of carbon deposit in the combustion chamber of internal combustion engine such as cars.
11. Catalytic combustion: Burn with other fuels together as for boilers, cooking stoves, melting metals.
TECHNICAL PARAMETER
OH300
AC Voltage Requirement :220/110 V
Phase :single
Power Consumption : 1.2 kw/h
Max Gas Output :300L/h
Max. Working Pressure: 1.3kg/cm2
Max. Water Consumption : 0.17 L/h
Water Feed: manual
Max. Flame Modifier Consumption: 0.15L/h
Flame Modifier Feed: manual
Dimensions - L*W*H :780*280*520mm
Gross Weight: 38 kg
Ventilation Space Requirement : 200mm in each direction
Competitive Advantages:
Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Customer's Design and Logo are Welcome ,
Competitive Prices ,
Earth-friendly Products ,
Small Order Acceptable
Unique Patented Features of Okay Energy Oxy-hydrogen Generators:
1. Electrolytic Cell adopts precise mould to integrated formed, prevent from explosion and leakage and it is insulation shell, won't charged.
2. Polar plate adopts special activity alloy material surface treatment, low overpotential and no leakage.
3. All internal pipeline is seamless stainless steel tube, no any rubber hoses, ensures the safety and reliability.
4.Perfect conbination by Multilevel wet-type flashback arrestor technology, automatic safety valve technology and dry-type fire resistance technology, ensure safety and reliability.
5. Full automatic water degree detection technology, achieves the functions of early warning of water level, complement water auto and protection when water shortage without machine shutdown.
What is oxy-hydrogen generator:
Oxy-hydrogen gas Generator consumes water and electricity, electrolyze water into H2 and O2, we can use H2 and O2 as source of flame replacing acetylene or natural gas or other fuel. It can be used for welding, cutting, polishing, brazing, glass processing and jewelry processing. Also can burst with other fuel together for heating.
Multi-functions application:
1. Gas welding and flame spray painting.
2. Welding, mending, repairing, kinds of jewelry made of platinum, gold, silver, copper, stainless steel etc of Jewelry Industry.
3. Direct fusion and welding, enameled wire, computer wire peeling, welding LED wafer, flame-treating circuit board of Electronic Industry.
4. The thermal processing of glass and quartz glass.
5. Organic glass Polishing.
6. Welding metal fittings and mending sand holes in dentistry, no-carbon flame disinfection.
7. Quartz glass tube Sealing and etc. Ampoules bottles Sealing.
8. Welding or heat treating small metal parts.
9. Carbon Steel Cutting, continuous casting slab cutting.
10. Removals of carbon deposit in the combustion chamber of internal combustion engine such as cars.
11. Catalytic combustion: Burn with other fuels together as for boilers, cooking stoves, melting metals.
TECHNICAL PARAMETER:
OH5500
AC Voltage Requirement: 380 V
Phase : three phase
Power Consumption: 17 kw/h (adjustable)
Max Gas Output : 5000L/h
Max. Working Pressure: 1.9kg/cm2
Max. Water Consumption: 2.8L/h
Water Feed: Auto
Dimensions - L*W*H : 1500*800*1450mm
Gross Weight : 396 kg
Ventilation Space Requirement : 400mm in each direction
Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Competitive Prices ,
Earth-friendly Products ,
Small Order Acceptable
Unique Patented Features of Okay Energy Oxy-hydrogen Generators:
1. Electrolytic Cell adopts precise mould to integrated formed, prevent from explosion and leakage and it is insulation shell, won't charged.
2. Polar plate adopts special activity alloy material surface treatment, low overpotential and no leakage.
3. All internal pipeline is seamless stainless steel tube, no any rubber hoses, ensures the safety and reliability.
4.Perfect conbination by Multilevel wet-type flashback arrestor technology, automatic safety valve technology and dry-type fire resistance technology, ensure safety and reliability.
5. Full automatic water degree detection technology, achieves the functions of early warning of water level, complement water auto and protection when water shortage without machine shutdown.
Dimensions - L*W*H : 1500*800*1450mm
Gross Weight : 396 kg
21422 Electric Power Suppliers
Short on time? Let Electric Power sellers contact you.
