Advantage Quick and easy installation in vehicles of every type. Supports most used models too Only short down-time (off-operation) period Proved and tested system Easy and accurate reading of engine fuel consumption No extra maintenance necessary Tamper-proof measurement Low installation costs Quick and easy installation Short down-time of vehicle only Quick pay-back period 0.8kg, 19*11*11cm
Supplier: Flow meter, density meter, pressure transmitter, level meter
Supplier: Dm72c wifi co2 meter
Buyer: Dm72c wifi co2 meter
SF800 - Low Pressure Flow Meter The patented SF800 is an all purpose flow meter with an excellent price-performance ratio. It is suitable for a wide range of applications and large variety of fluids, and covers flow velocities of 0.5 to 20 liter per minute at temperatures of -20 to +90'C and an operating pressure of 16 bar (max 40 bar). The SF800 is entirely made of high-quality plastics and composites with great chemical and thermal resilience. The housing is made of PVDF, a high grade PVC, while the internal rotor of only 0.04 gram is made of Vectra, a liquid crystal polymer of very low weight. Both material are not susceptible to limescale. An integrated PCB emits the infrared signal, which is interrupted by the three blades of the rotor. SMD components transform the interrupted signal into a pulse. SF800 Low Pressure Flow Meter Specifications * Flow velocity: 0.5 ~ 20 litre per minute * Temperature: -20 ~ +90'C * Operating pressure: 16 bar * Max. pressure: 40 bar * Power consumption: 12 - 36 mA/s * Material: PVDF, Vectra (rotor), Viton or EPDM * Output: frequencyPower consumption: 12 - 36 mA/s
SF800 - Low Pressure Flow Meter The patented SF800 is an all purpose flow meter with an excellent price-performance ratio. It is suitable for a wide range of applications and large variety of fluids, and covers flow velocities of 0.5 to 20 liter per minute at temperatures of -20 to +90°C and an operating pressure of 16 bar (max 40 bar). The SF800 is entirely made of high-quality plastics and composites with great chemical and thermal resilience. The housing is made of PVDF, a high grade PVC, while the internal rotor of only 0.04 gram is made of Vectra, a liquid crystal polymer of very low weight. Both material are not susceptible to limescale. An integrated PCB emits the infrared signal, which is interrupted by the three blades of the rotor. SMD components transform the interrupted signal into a pulse. SF800 Low Pressure Flow Meter Specifications * Flow velocity: 0.5 ~ 20 litre per minute * Temperature: -20 ~ +90 deg C * Operating pressure: 16 bar * Max. pressure: 40 bar * Power consumption: 12 - 36 mA/s * Material: PVDF, Vectra (rotor), Viton or EPDM * Output: frequencyPower consumption: 12 - 36 mA/s
PUTF201 clamp-on transit-time ultrasonic flow meter utilizes transit-time principle.The transducer is mounted outside surface of the pipe without requirements of flow stop or pipe cutting.It is very simple,convenient for installation,calibration and maintenance. Small,media,large three pairs of transducers meet different size pipeline measurement demand.Plus,select thermal energy measuring function to achieve completely energy analysis.Widely applied for processing monitoring water balance test district heating balance test energy efficiency monitoring as easy installation and simple operation advantages.
Water meter flow meters Porter:sales9@gnflowmeter.com Site:www.microflowmeter.com Skype:shcixi_ru water meter flow meters(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display of water meter flow meters together with electrical instrument can achieve remote only instantaneous flow or accumulated flow. The water meter flow meters with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum. Model Flow range Connection CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread CX-M3-SS/AL 1-300 ml/min G1/8 female thread CX-M5-SS/AL 5-1000 ml/min G1/8 female thread CX-M6-SS/AL 0.5-100 l/H G1/4 female thread CX-M9-SS/AL 5-550 l/H G1/4 female thread CX-M12-SS/AL 1~30 L/min G1/2 female thread CX-M25-SS/AL 5-110 l/min G1 female thread CX-M40-SS/AL 10-250L/min G1 1/2 female thread CX-M50-SS/AL 10-500L/min G2 female thread Feature 1) Compact and economical design suited for OEM 2) High accuracy and repeatability 3) No requirement for flow conditioning 4)Stainless steel rotors 5) Measures high and low viscosity liquids 6)Original Equipment Manufacturers Select the JSN and select the water meter flow meters,we will provide the professional service for you.