Find Verified Electric Power Suppliers, Manufacturers and Wholesalers

small camping power generators 300W laptop solar battery portable power station

We are distributors of Phase Scientific covid-19 test kits.

1. Phasify Viral RNA extraction kits - $600/ 100 reactions.
2. INDICAID - RAPID ANTIBODY TEST - $300/25 KITS PER BOX

2 in 1 meters measure average values of DC Voltage or DC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Analog Meters measure AC/DC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

ML14xx is Multiload Monitor with 12 single phase load or 4 three phase load option. It measures important electrical parameters of multiple loads simultaneously in a single unit, eliminating the need and cost of multiple panel meters. It provides quick, easy and error free current connections with plug and play connectors. It measures real time electrical parameters like Active / Reactive / Apparent energy and power, current, THD, demand, max demand for each load. The instrument has 4 configurable relay outputs, which can be used for Limit / Pulse / Residual Current / 3Phase Load Health Monitoring / Tariff / RTC / Timer tripping or alarms. This instrument communicates with either MODBUS or Ethernet connection

AC DC Power Supplys. Different types.

Description
UT200+ series handheld automatic range true RMS clamp meter, designed according to safety standard EN61010-2010 CAT II600V/CAT III 300V grade, with full-function gear anti-burn protection, can meet high reliability and high safety operation requirements; It contains the basic functions of electrical measurement, with high precision measurement, and expands the current frequency (UT201+ / UT202+ only), high voltage frequency function, UT202+ has temperature measurement function, UT203+ has DC current measurement function, and the new design makes it An excellent measurement tool for electronic and electricians with superior performance
Features:
Large screen LCD display, fast ADC / analog to digital converter Full-featured false detection protection,
overvoltage, overcurrent alarm prompt True RMS;
voltage measurement 600V With high voltage frequency measurement AC current measurement function With current frequency measurement function (UT201+/UT202+UT202A+ only)
Temperature measurement function (UT202+/UT204+ only)
Capacitance measurement function (UT202+max 4mF/UT203+max 40mF/UT202A+/UT204+max 60mF) NCV electric field detection with sound and light alarm prompt;
LIVE live line measurement (UT202A+/UT204+ only)
Specification Range UT201+ UT202+ UT202A+ UT203+ UT204+
AC current (A) 400A (2%+10) (2%+10) (2.5%+5)
600A (2%+10) (2.5%+5)
AC current frequency (Hz) 50Hz~100Hz (1%+5) (1%+5) (1%+5)
DC current (A) 400A (2.5%+5)
600A (2.5%+5)
AC voltage (V) 600V  (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5) (0.8%+5)
AC voltage frequency(Hz) 10Hz~10kHz (1%+5) (1%+5) (1%+5)
10Hz~60kHz (0.5%+2) (0.5%+2)
DC voltage (A) 600V  (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2) (0.5%+2)
Resistance (�©) 40M�© (0.8%+2) (0.8%+2) (0.8%+2)
60M�© (0.8%+2) (0.8%+2)
Capacitance (F) 4mF (4%+5)
40mF (4%+5)
60mF (4%+5) (4%+5)
Temperature () -40~1000 (1.5%+5) (1.5%+5)
Frequency (Hz) 10Hz~10MHz (0.1%+4) (0.1%+4) (0.1%+4)
Features
Display count 4000 4000 6000 4000 6000
Auto range
Jaw opening 28mm 28mm 28mm 28mm 28mm
True RMS
NCV
Live wire test
Continuity test
Diode
MAX/MIN
Relative mode
Zero mode
Data hold
Low battery indication
Auto power off
General Characterisitics
Power 1.5V battery (R03) x 2(Not included for air shipping)
Display 37mm x 25mm
Product color Red and grey
Product net weight UT203+:235g
Product size 215mm x 63mm x 36mm
Standard accessories UT203+: test leads,
Standard individual packing Gift box, Carring bag, English manual

UNI T True RMS Digital Multimeter 6000Counts Auto/ Manual Range AC/DC Tester
UNI T True RMS Digital Multimeter UT15B /UT17B PRO 6000Counts Auto/ Manual Range AC/DC 1000V/10A Resistance Frequency Diode Frequency Diode Temperature VFC Tester Backlight Data hold Flashlight
UT15B PRO / UT17B PRO is a high-reliability true RMS digital multimeter.The product has a built-in VFC anti-jamming start mode, which can filter out the carrier frequency interference or distortion voltage signal superimposed by the sine wave, and stably measure the output voltage of the inverter. And equipped with a hand-automatic backlight induction self-starting function.
UT17B PRO has added frequency and duty cycle modes, which can switch frequency and duty measurement arbitrarily between DC / AC. It is also equipped with a temperature measurement function with a resolution of 0.1

The full range of functions of this series of products realizes the misdetection protection of up to 30KVA energy,
ensuring users are safer and more reliable in operation,and obtained CETLus certification according to the CAT III 1000V / CAT IV 600V safety level.

Features
1.6000 display digits / true effective value measurement range is wider

2. Large screen LCD display, easy to read data;

3.1000V AC / DC voltage measurement

4. VFC frequency conversion voltage measurement 600V (low pass) strong anti-interference;

5.LED flashlight, automatic induction backlight, to deal with dark environment

6.60M resistance measurement / 6000uF capacitance measurement

7.100kHz frequency / duty cycle (UT17B PRO only)
8. Temperature measurement (UT17B PRO only)

9. Diode / on / off beep

10. Manual / automatic range

11. Max / Min / Relative

12. Current gear protection: equipped with fused fuse 440mA / 11A 1000V fuse

13. Dangerous voltage warning function, easier to use

14. CAT III1000V / CAT IV600V safety level double insulation design.

Product overview
Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a -type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, low starting flow, high measurement accuracy, and no pressure loss.
The main unit can be installed in the wall, instrument box, and distribution box with a protection level of IP67. The external clip sensor is installed on the surface of the pipe and selects different sensors. The applicable diameter is DN15~DN6000mm.

Product features
1. Simple installation, no need for professional workers
2. High precision and low price
3. Can work in humid and water-immersed environment

GMF200 Series Ultrasonic Flowmeter
Model GMF200-D
Principle Ultrasonic time difference principle
Precision ±1%
Display 4x8 Chinese or 4x16 Western dot matrix backlit LCD, supporting Chinese, English, Italian and French languages
Output 1 channel OCT pulse output (pulse width 6-1000ms, default 200ms)
Data interface Isolating the RS-232 application interface, the flow meter can be upgraded through a PC
Pipe Steel, stainless steel, cast iron, copper, PVC, aluminum, fiberglass, and other dense pipes, allowing lining
Pipe inner diameter 15-6000mm
Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, from the pump outlet 30D (D is the pipe diameter)
Medium Water, sea water, sewage, acid and alkali, alcohol, beer, various oils, etc.
Fluid temperature -30~+160�°C
Turbidity 1000pmm bubble content is small
Flow rate 0±10m/s
Working environment Host: -20 ~ +60 C; flow sensor: -30 ~ +160 C
Host: 85% RH; sensor protection grade: IP67
Power supply 3-cell rechargeable Ni-MH battery with 1.2V capacity of 2000mAH, which can work continuously for more than 12 hours every time.
Power consumption 1W
Housing material Flame retardant ABS
Host weight 390g

GMF200-H series hand-held ultrasonic flowmeter realizes non-contact measurement of liquid flow. Install the sensor on the outer wall of the pipe to complete the flow measurement. With small size, easy to carry, accurate measurement and so on.
Widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow calibration, temporary detection, flow inspection, water meter balance debugging, heating network balance debugging, and energy saving monitoring. It is a necessary tool for timely flow detection.

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Product Description
ADL10-E Single Phase Electric Energy Meter
General
ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard.
Technical Parameters
Voltage Reference voltage AC 220V
Reference frequency 45-65 Hz
Consumption

Input Voltage240 V: 415 V
Input Phase: 3 No
Input Frequency: 60 Hz
Output Open Circuit Voltage: 89 V
Welding Current Range: 20- 500Amp