Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: Model Prod capacity (Nm3/h) O2 purity (%) Outlet pressure (bar) Compressed air Min. (m3/min) Working pressure (bar) Power consumption (KW) STPO-4 4 93+/-3% 1-5 0.86 5.5-7.5 5.43 STPO-5 5 93+/-3% 1-5 1.17 5.5-7.5 7.60 STPO-8 8 93+/-3% 1-5 1.87 5.5-7.5 11.75 STPO-10 10 93+/-3% 1-5 2.33 5.5-7.5 15.75 STPO-15 15 93+/-3% 1-5 3.25 5.5-7.5 19.05 STPO-20 20 93+/-3% 1-5 4.30 5.5-7.5 31.59 STPO-25 25 93+/-3% 1-5 5.80 5.5-7.5 31.59 STPO-30 30 93+/-3% 1-5 7.00 5.5-7.5 39.04 STPO-35 35 93+/-3% 1-5 7.58 5.5-7.5 47.00 STPO-40 40 93+/-3% 1-5 9.30 5.5-7.5 57.70 STPO-45 45 93+/-3% 1-5 10.5 5.5-7.5 57.70 STPO-50 50 93+/-3% 1-5 10.6 5.5-7.5 57.70 STPO-60 60 93+/-3% 1-5 14.0 5.5-7.5 77.70 STPO-65 65 93+/-3% 1-5 15.2 5.5-7.5 92.70 STPO-70 70 93+/-3% 1-5 16.2 5.5-7.5 92.70 STPO-80 80 93+/-3% 1-5 18.7 5.5-7.5 114.5 STPO-90 90 93+/-3% 1-5 20.0 5.5-7.5 114.5 STPO-100 100 93+/-3% 1-5 23.3 5.5-7.5 137.0 STPO-160 160 93+/-3% 1-5 37.4 5.5-7.5 229.0 STPO-200 200 93+/-3% 1-5 46.7 5.5-7.5 274.0 Remark: Above standard model Oxygen Plant is based on an altitude of
Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Mobile Oxygen Generator Introduction: The Mobile Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (ZMS) to separate the Oxygen gas from the air. It is more and more popular used for on-site Oxygen supply, or even for some specific gas station which has to move frequently. ShinTek Mobile Oxygen Generator consists of air compressor, air dryer, air filters, PSA Oxygen generator, optional cylinder filling system and related control system. There are three types for choose: skid-mounted, container mounted or vehicle mounted. Mobile Oxygen Generator specifications: 1. Oxygen production capacity: 5 ~ 100 Nm3/h 2. Oxygen purity: 93+/-3%; 3. Oxygen pressure from the Oxygen Generator: 1-5bar 4. Oxygen pressure can be boosted to be as higher as 150bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Oxygen Generator Features: (1) Three types for choose: skid-mounted or container-mounted or vehicle-mounted; (2) The Mobile Oxygen Generator is equipped with a stable screw air compressor; (3) The Mobile Oxygen Generator use Siemens PLC and SMC valves; (4) Fewer moving parts enable the Mobile Oxygen Generator more reliable, and less maintenance jobs; (5) The Mobile Oxygen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Oxygen Generator is energy efficient (0.3 KWH/m3 Oxygen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Plant is based on an altitude of
Nitrogen Generator Introduction: The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders. Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency. Nitrogen Generator specifications: 1. Nitrogen production capacity: 2~2000Nm3/h 2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%... 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Skid-mounted enable an easy installation and transportation. Nitrogen Generator Features: (1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor; (2) The Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs; (4) The Nitrogen Generator does not need foundation base; (5) The Nitrogen Generator does not need cooling water; (6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed; (7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders. (10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Generator Introduction: The Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Generator consists of air compressor, air dryer, air filters, PSA oxygen generator, and related control system. The patented design enable our PSA Oxygen Generator a lowest energy consumption and best efficiency. Oxygen Generator specifications: 1. Oxygen Production capacity: 2~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Generator: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Generator is based on an altitude of
Tide Power System China TPS Series Gas generator set was powered by Cummins, Deutz, and TPS gas engine, these engines are equipped with Advanced Gas Egnine ECU, USA Altronic/Bosch/NGK Ignition System, Woodward speed governor system, Woodward/Heinzmann/Impco Air-Gas Mixing System to achieve lean-burn technology which is same as CPG CUMMINS gas generator set. Gas Genset Output: 25kw-500kw Gas Engine Series: CG / DG / TPG series. Alternator: TPS, Leroy Somer, Marathon, Siemens Control Panel: Comap, Deepsea, Harsen Gas Train: ball valve, gas filter, gas pressure regulator, pressure gauge, electromagnetic valve; (Germany DUNGS brand optional ) HZ&RPM: 50HZ&60HZ, 1500/1000RPM& 1800/1200RPM Acceptable Gas: Natural gas, LPG, CNG, Biogas, colliery gas, landfill gas, sewage gas etc.
Tide Power System Co.,Ltd. is a professional gas & diesel generator set manufacturer since 2006.In the past ten years we have committed ourselves to research and design in eco-friendly power solution which is of rapid demand around the world. As a leading gas generator supplier, we have experience in assemble gensets using different fuel source which includes natural gas, biogas, syngas/biomass gas and also systems that can maximize the use of heat like CHP and CCHP. Welcome your enquiry and visits. Applicable Gas : Natural gas generator set, Biogas generator set, LPG generator set ,Landfill gas power plant, Coal mine gas generator, coke oven gas generator, low calorie gas generator, Oil field gas genset, Shale gas generator, Syngas generator, biomass gas generator, wood gas generator, rice husk gas generator set, Pyrolysis Gas generator set, Hydrogen gas generator set, Hydrogen power gas generator, palm kernel shell syngas generator set, PKS gas generator set Gas Engine Brand and Output: 1.Germany MWM gas generator set : 0.4MW to 4.3MW, TCG2016 (CG-132 ), TCG2020 (CG-170), TCG2032 (CG-260), 2.South Korea DOOSAN PSI Gas generator set : 100KW to 350KW, 8.1LT / GE08TI, 11.1L / GE12TI, 14.6L / GV158TI, 18.3L / GV180TI, 21.9L / GV222TI, 3.UK Perkins gas generator set : 10KW to 1000KW, KVT-E gas engine, 4006-23TRS, 4008-30TRS, 4016-61TRS, 4.Switzerland Liebherr Biogas generator set : 132KW-560KW, G934, G944, G946, G9508, G9512 5.Cummins, Deutz, Lovol gas generator set and JDEC gas generator: 25KW-1200KW, 1000RPM and 1500RPM, 6.TBG Series Syngas generator/Biomass gas generator/Pyrolysis gas power generator set: 120KW to 1000KW 7.TH2 Series hydrogen gas generator set, Hydrogen power generator set, HHO power generator set, H2 gas generator set : 10KW to 500KW Applicable Range: gas power plant, BOO power plant, BOT power plant, EPC power plant, POME power plant, CHP / Cogeneration of Heat and Power with Heat Exchanger to generate hot water or vapor, CCHP/Trigeneration of cold, heat and power, CCHP system with Broad Chiller---lithium bromide chiller (absorption-type Chiller ). Consumable parts for Gas generator: MWM spare parts /spark plug, CAT spark plug, MTU spark plug, GE Jenbacher spark plug, GE Waukesha spark plug, Guscor spark plug, Pls visit our website and send us emails if any question. Hydrogen fuel generator set,Hydrogen gas generator set,Hydrogen power generator set,Hydrogen powered electricity generator H2 gas generator set,H2 fuel generator set,H2 power generator set,H2 powered electricity generator set HHO hydrogen gas generator set,HHO generator set,HHO power generator set,Dual fuel gas generator,BOO power plant BOT power plant,EPC power plant,2G cogeneration,2G CHP,Tedom cogeneration,Tedom CHP,CHP system,CCHP system Cogeneration of heat and power,Broad Chiller CCHP system,Trigeneration of cold heat and power
Tide Power System China TPS Series Gas generator set was powered by Cummins, Deutz, and TPS gas engine, these engines are equipped with Advanced Gas Egnine ECU, USA Altronic/Bosch/NGK Ignition System, Woodward speed governor system, Woodward/Heinzmann/Impco Air-Gas Mixing System to achieve lean-burn technology which is same as CPG CUMMINS gas generator set. Gas Genset Output: 25kw-500kw Gas Engine Series: CG / DG / TPG series. Alternator: TPS, Leroy Somer, Marathon, Siemens Control Panel: Comap, Deepsea, Harsen Gas Train: ball valve, gas filter, gas pressure regulator, pressure gauge, electromagnetic valve; (Germany DUNGS brand optional ) HZ&RPM: 50HZ&60HZ, 1500/1000RPM& 1800/1200RPM Acceptable Gas: Natural gas, LPG, CNG, Biogas, colliery gas, landfill gas, sewage gas etc.
TPS ( Tide Power System,China ) TDA Series Gas generator set was powered by Doosan Daewoo gas engine from South-Korea. Due to proven heavy-duty and advanced fuel system-electric controlled air-gas mixture throttling and ignition system, Doosan Natural gas Engine meet the best-level performance even under harsh conditions, and can meet the stringent US EPA and CARB regulations. Gas Genset Output: 100kw-342kw Gas Engine Series: GE08TI, GE12TI, GV158TI, GV180TI, GV222TI Alternator: Leroy Somer, Marathon, Siemens Control Panel: Comap, Deepsea, Harsen HZ&RPM: 50HZ&60HZ, 1500RPM& 1800RPM Acceptable Gas: Natural gas Doosan PSI GE08TI 8.1L gas generator Doosan PSI GE12TI 11.1L gas generator Doosan PSI GV158TI 14.6L gas generator Doosan PSI GV180TI 18.3L gas generator Doosan PSI GV222TI 21.9L gas generator
Tide Power System Co.,Ltd. is a professional gas & diesel generator set manufacturer since 2006.In the past ten years we have committed ourselves to research and design in eco-friendly power solution which is of rapid demand around the world. As a leading gas generator supplier, we have experience in assemble gensets using different fuel source which includes natural gas, biogas, syngas/biomass gas and also systems that can maximize the use of heat like CHP and CCHP. Welcome your enquiry and visits. Applicable Gas : Natural gas generator set, Biogas generator set, LPG generator set ,Landfill gas power plant, Coal mine gas generator, coke oven gas generator, low calorie gas generator, Oil field gas genset, Shale gas generator, Syngas generator, biomass gas generator, wood gas generator, rice husk gas generator set, Pyrolysis Gas generator set, Hydrogen gas generator set, Hydrogen power gas generator, palm kernel shell syngas generator set, PKS gas generator set Gas Engine Brand and Output: 1.Germany MWM gas generator set : 0.4MW to 4.3MW, TCG2016 (CG-132 ), TCG2020 (CG-170), TCG2032 (CG-260), 2.South Korea DOOSAN PSI Gas generator set : 100KW to 350KW, 8.1LT / GE08TI, 11.1L / GE12TI, 14.6L / GV158TI, 18.3L / GV180TI, 21.9L / GV222TI, 3.UK Perkins gas generator set : 10KW to 1000KW, KVT-E gas engine, 4006-23TRS, 4008-30TRS, 4016-61TRS, 4.Switzerland Liebherr Biogas generator set : 132KW-560KW, G934, G944, G946, G9508, G9512 5.Cummins, Deutz, Lovol gas generator set and JDEC gas generator: 25KW-1200KW, 1000RPM and 1500RPM, 6.TBG Series Syngas generator/Biomass gas generator/Pyrolysis gas power generator set: 120KW to 1000KW 7.TH2 Series hydrogen gas generator set, Hydrogen power generator set, HHO power generator set, H2 gas generator set : 10KW to 500KW Applicable Range: gas power plant, BOO power plant, BOT power plant, EPC power plant, POME power plant, CHP / Cogeneration of Heat and Power with Heat Exchanger to generate hot water or vapor, CCHP/Trigeneration of cold, heat and power, CCHP system with Broad Chiller---lithium bromide chiller (absorption-type Chiller ). Consumable parts for Gas generator: MWM spare parts /spark plug, CAT spark plug, MTU spark plug, GE Jenbacher spark plug, GE Waukesha spark plug, Guscor spark plug, Pls visit our website and send us emails if any question.
Gas Generators Common features are gas generator sets: Environment friendly Low noise level Greater load bearing capacity Proven reliability and durability Nation-wide service network Unmatched warranty: 2 years/5000 hours Single window after-sale support round the clock Extended oil change period (1000 hrs) Lower operating cost Application: Generators are used in IT & Telecommunication Companies, Industrial, Agricultural, Infrastructure, Electricity Board etc.
medium:diesel oil flow range:1-80L/H scene display accuracy:1% material:brass calculate cavity temperature:-40-80C pressure:30bar carton case/wooden case/plywood case
flow range:0.5-100 ml/min (suitable for various chemical liquid) accuracy:0.5% Temperature:-30~80 pressure:32bar (customized for high pressure) output:square-wave pulse supply:4-26VDC wetted material:316L carton case/wooden case/plywood case
flow range:1-250 ml/min (suitable for liquid and viscosity less 25CP) accuracy:1% Temperature:-30~80 pressure:32bar (customized for high pressure) output:5Vsquare-wave pulse supply:12VDC wetted material:316L carton case/wooden case/plywood case
Size:DN6 Flow range:0.1-0.6m3/h Without display, 2 wire Output:4-20mA Connection:screw Body material:SS304 Power supply:24V Accuracy1% Temperature:-20-+120C carton case/wooden case/plywood case
1. Caliber: DN3~DN3000 2. Color: White, blue 3. Display: High visible backlight LCD 4. Nominal pressure: 0.6 ~ 4.0 MPa 5. Ambient Temp: -25 Deg C~+ 60 Deg C 6. Accuracy: 0.5%, 0.3%, 0.2 (selectable) 7. Voltage Supply: 12 ~ 36V DC, 85 ~ 265V AC 8. Protection Class: IP65, IP67, IP68 9. high definition of background LCD display Output: 4-20mA, pulse Lining material: Rubber, PTFE (also called F4) Connection: Flanged, clamp-on, threaded Type: Comapt type, remote type Communication: MODBUS, RS485, HART Package: carton and wooden box
CP200C: 50/60HZ,1500RMP Power factor:0.8,400/230V 3phases 4wires. Standby output:200KVA, Prime output:180KVA. Engine Model:6CTA8.3-G2. Cylinder No.:6L. Length/Width/Height(mm):2400/900/1650 Weight(kg):1550 Carton and foam,export packaging.
hy-22 1m©ø£¬10kg
