Transformers.
Dg generators, electronic generating set, wind turbines, dg generator spare parts.
Generators.
Generator parts namely, Qumins, bmw, kater pillar.
Generator set.
Burst generators, voltage dips.Transportation and shipping
Wind energy generators.
These power units are designed to operate in continuous mode and are intended to supply cheap and high-quality energy to any consumer. These power units are ideal for: - placement in remote and hard-to-reach places; - when used on islands, autonomous platforms and/or ships; - when used to provide electricity for cryptocurrency mining; - in case of connecting electric generators - to supply electricity to the network with consumers; - in case of connecting hydraulic pumps - ensure operation of the hydraulic system and/or movement, which is based on the rotation of hydraulic motors. The Power Unit is initially designed and intended for autonomous power supply (supplying electricity to a local set of electrical appliances). You need to carefully calculate your installed power (the total power of all your electrical appliances) and then determine the actual power consumption (usually 25% of the installed power). The actual power should correspond to 75% of the Power Unit. The Power Unit can also supply electricity to a local or national power grid, for this you need to provide us with the parameters of the connection to the grid and we will provide you with an interconnector. The Power Unit can supply electricity to cryptocurrency mining devices or to charge electric vehicles (batteries). To do this, you need to contact us (see the last page) and we will provide a solution suitable for your case.
Use and scope of application This standard conforms to GB/T12173-2008 "General Electrical equipment for mining", JB 8739-2015 "Flameproof high voltage distribution device for mining", GB3836.1-2010 "Explosive environment Part 1: General requirements for equipment", GB3836.3-2010 "Explosive environment Part 3: Developed by the relevant requirements of the increased safety type "E" protected equipment "and other standards, the technical parameters and requirements of this standard are more specific, detailed and more operational. This standard specifies the type specifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage of GKG mining general high voltage switchgear. This standard is applicable to GKG type general high voltage switch cabinet used in coal mine without gas, coal dust explosion danger places and other similar underground industrial production departments such as non-coal mine mountains. Manufacture and inspection of (hereinafter referred to as switchgear). Normative reference document The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendment orders) applies to this document. GB 3636.1-2010 Explosive atmospheres - Part 1: General requirements for equipment GB 3836.3-2010 Explosive atmospheres - Part 3: Equipment protected by increased safety type "E" GB/T11022-2011 Common technical requirements for high voltage switchgear and control equipment standards GB1984-2003 High voltage AC vacuum circuit breaker GB 4208â??2008 Enclosure protection Class (IP code) GB/T 12173-2008 General electrical equipment for mining GB/T 156â??2007 Standard voltage GB/T 191â??2008 Pictorial signs for packaging storage and transportation GB/T 2423.4-2008 Environmental testing for electrical and electronic products -- Part 2: Test methods -- Test DB: Alternating humid heat (12H+12H cycle) JB-2015 flameproof high voltage distribution devices for mining AQ1043-2007 Safety marks for mining products GB3906-2006 3.6KV~40.5KV Ac metal enclosed switchgear and control equipment
2MW HFO Generating Sets for Sale MAN 9L21/31 1980Kw x 1000rpm x 6.6kv x 50Hz 0-hour running
3KW Gasoline Generator Ideal for: Smaller applications like powering home appliances, tools, or camping equipment.  Typical Features: Compact and portable design  Easy to start and operate Quieter operation than larger models Lower fuel consumption Common Applications: Home backup power, camping, construction sites, outdoor events 5KW Gasoline Generator Ideal for: Larger applications like powering entire homes, workshops, or construction sites. Typical Features: More powerful engine for heavy-duty tasks Longer run time on a full tank of fuel Built-in circuit breaker for protection May have additional features like remote start or parallel capability
he wind power generator constitutes an upright rigid, pendulous mast that swing on a horizontal shaft and held in equilibrium, with counter weight suspended at bottom.
INMESOL generator sets, new, EXW Lithuania, possible delivery: (1) IRR-066, 52kW/66kVA, rental range, silent canopy, sockets panel, trailer - 26.397,32 EUR (2) IRR-044, 36kW/44 kVA, rental range, silent canopy, sockets panel - 18.849,92 EUR (3) IV-110, 88kW/110 kVA, stand-by range, silent canopy, ATS, pre-heating - 22.143,92 EUR (4) AI-140, 111kW/140 kVA, open, stand-by, ATS, pre-heating - 19.855,50 EUR more info in web-site, by e-mail As agent on behalf of Vilniaus Spedicija UAB
The Senwart gasoline generator UG6500G is a must have for reliable power generation. Features: A sturdy frame ensures reliability during transportation, making it trustworthy in a variety of environments. High output power capability makes it suitable for demanding power generation needs. Rugged motor utilizes 100% copper wire for efficient power generation and long-term reliability. Easy and quick start options allow for manual or electric start for convenience and flexibility. Multiple voltage options: 100V, 220V and 380V provide versatility to meet different power requirements. Efficient 4 stroke OHV engine provides reliable performance for continuous power generation. Innovative panel design enhances airflow to extend the life of the machine and ensure optimal performance. The advanced ventilation system allows for low-temperature operation for increased durability and efficiency. Low oil level protection with alarm prevents generator damage and ensures longevity. Overload and short circuit protection prevents motor burnout and ensures safe operation. IP23 rating adds an extra layer of safety and ensures long-lasting performance. MODEL: UG6500G Frequency : 50(Hz)/60(Hz) Engine model : 190F Engine type : 4 stroke/Air cooling/OHV Rated output : 5.5kW Max output : 6.5kW AC output : 220V/110V Power : 13 HP Displacement : 389cc Fuel tank 25L Run time : 12 Hours Starting model : Recoil/Electric Package : 710x540x570mm N.W./G.W. : 80kg/86kg
Perkins Diesel Engine, Diesel Generator set 50HZ/1500RPM, 380/220V, 400/230V, 415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM, voltage is 220/127V, 380/220V, 440/254V can be option There are Perkins from China, UK, USA and india, all depend on the required model. ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank Documents and Manuals Generator set Genset Model AP1100 Rating Power (KW/KVA) 800/1000 Standby Power(KW/KVA) 880/1100 Rating Ammeter(A) 1519 Diesel Engine Engine Model 4008TAG2 Prime Power(KW) 899 Standby Power(KW) 985 Bore X Stroke (mm) 160X190 Number of Cylinder & Configuration 8 in line Displacement (l) 30.6 Compression Ratio 13.6:1 Aspiration Turbocharged & After-cooled Max. intake depression(kPa) 6 Combustion air Volume(m³/min) 70 Max. Exhaust back Pressure(kPa) 10 Exhaust Gas Flow(m³/min) 201 Max. Exhaust Gas Temperature() 485 Cooling Water cooled with Radiator Fan cooling air flow(m³/min) 1074 Total Coolant capacity(l) 188 Max. temperature of coolant() 93 Max. permissible oil temp.() 105 Total oil capacity(l) 166 Rating Fuel Consumption(l/h) 215 Governing Type Electrics Governor Alternator Rating Voltage(V) 380/220 (adjustment) Alternator Model TAL-A49-E Rating Capacity(KW/KVA) 800/1000 Eff.% 94.2% Power Factor 0.8 lagged Exciting type Brushless PMG exciter, AVR Voltage regulation ±0.5% No. of Phase 3 phase 4 wire Enclosure Class IP23 Class of Insulation H Battery Rating Capacity(AH) 4X150AH 12V Generator set dimension (LXWXH) 5300X1870X2500 mm Weight (kg) 7900 FAQ Q: Do you offer OEM service? A: Yes Q: What is your payment term? A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight. Q: What is your lead time? A: About 15-25 days after receiving advance deposit or original L/C. Q: What certificates do you have? A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc. Q: What warranty do you provide? A: One year or 1200hours running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.
AP4000 - 4000 Watt Portable Generator A-IPOWER | SKU: AP4000 Features: Performance Series Engine: 223cc OHV engine with Cast Iron Sleeve & Low Oil Shutdown High Output: 4,000 starting watts - 3,000 running watts Run Time: 4 - gallon fuel tank for extended runtime of 14.5 hours at 25% load Digital Hour Meter: For quick and easy run time reading AC Outlets: Complete with standard 20A - 120V house hold (5-20R), 30A - 120V Twist lock (L5-30R) and 30A - 120V RV Outlet (TT-30R) Heavy Duty Frame Construction: Built tough with durable powder coat finish Portable Design: Easy to transport with folding handle and wheels Description
Item number: FW1000 Input power:8.7KWH Supply Power:380V 50Hz,three phase voltage Production Capacity:upto 1000Liter/day @ 30�º C & 80% RH Working Conditions:15�º C - 45�º C and 30% - 100% RH Filters: G3 Non-woven filter+PPF+GAC(pre carbon)+ PPF+RO+UV Compressor:Enclosed vortex compressor, 2qty - Phase-sequence Protection, - Delay Protection, - Hi & Low Pressure Protection, - Overheat & Overload Protection Control Type: Thermal expansion valve Recycle Fan:High efficient centrifugal fan,2pcs Heat Removal Fan:Efficient axial flow fan,2pcs Refrigerent:R410A Net Weight:850Kgs Machine Size (LxWxH):1895*1557*1630mm
Power supply:AC220V/50Hz , 110V/60Hz Power consumption:0.5KWH Water produced:upto 25 Liter/day @ 30�º C & 80% RH Function: making water from air, heating and cooling Working condition:ï¼?20% humidity Compressor:HUAYI/ Cubigel, R134a Cold water:6-10�°C, R134a Hot water:92�°C, 5L/H Dispensing:1.2-1.3L dispensing per min Filter:air filter +PPF+GAC(pre carbon)+UF+BIO filter+T33+LED-UV Machine: 375*307*1138mm/42kgs Cartoon box: 430*360*1175mm/46kgs Sample wooden box: 450*380*1360mm/52kgs Loading qty:168/348units(20GP/40HQ) Display shows: water level, temperature, humidity CE, CB, UL, IEC well r
This series of power supplies have been designed and developed for OEM application requiring continuous operation for NDT inspection in various fields. Non -destructive testing is extremely valuable for evaluation, troubleshooting, research, and quality control in science and industry. These compact high frequency units have to be connected to an X-Ray tube to generate X-Rays and are available in 3 models 125kV, 5mA; 160kV, 5mA and 220kV, 5mA. The high frequency output allows for lower kV per exposure and superior imaging for better evaluation.
Turbine generator.
