Type 34HS8450-45
Phase 2
Body length 80mm
Rated voltage 2.1 V
Resistance (20 )  0.35± 0.1 / phase
Holding torque 4.5 N.cm
Rotor Torque 1400 g.cm2
Step angle 1.8± 5%
Rated current DC 6.0 A/phase
Inductance 3.6±20% mH / phase
Insulation  Class Class B
G9138 is a high-speed, high efficiency, high precision and versatile product developed by SDLG after full investigation of market demands, which can complete the ground leveling and trenching, slope scraping, bulldozing, snow discharge, loosing, compaction, material distribution, mixing, etc., and is widely used in highways, airports, defense engineering, mine construction, road construction, water conservancy construction, farmland improvement and other construction conditions.
Reliability
1. Rear drive axle: China Motor Grader uses the large speed ratio heavy drive axle to meet the low-speed finishing requirements, and is equipped with the no-spin limited-slip differential to greatly improve the dynamics and trafficability of the whole Mining Motor Grader; the heavy roller chain drive balancing box can swing by ± 15 °, to ensure that that middle and rear wheels touch the ground at the same time to significantly increase the overall traction and flatness of the blade operation.
2. Circle turn system: It uses a dual cylinder + circle turn valve structure, so that the dual drive gear is in engaged drive with the rotary gear ring; therefore, there are more meshing teeth quantity, low teeth stress and small abrasion; the cylinder has high efficiency, and the blade is circle turn under loads, so that it has high operation precision and high reliability.
3. Moveable blade control system: It is connected to the ear plate with the front frame through the composite bearing, so Motor Grader for Sale has high impact resistance, wear resistance, low friction coefficient and high reliability; the moving part applies the imported lubrication-free and maintenance-free composite bearing and high reliabilityï¼?
4. Gearbox: It is equipped with a yd13 power shift gearbox, which can change the speed in six-forward and three-reverse to adapt to the complex conditions.
5. Braking system: The standard single-loop fully hydraulic braking system,brake valve,charge valve and other key elements apply the mico products, which is safe and reliable, and the dual-loop fully hydraulic braking system moduleis optional.
6. Frame: The front frame is in a box-type frame structure, so it has high strength and high reliability; the rear frame is in a frame structure made by welding of the box-type beam, and the attachment device is easy to assemble so it has high reliability.
Energy-efficient
Hydraulic Motor Grader is equipped with a weichai engine, which is in good match with the advance yd13 gearbox to achieve optimum performance and fuel efficiency, so it is energy-saving and efficient.
Convenient
1. Instrument panel: China Road Grader uses the digital stepping instrument panel, so it has high man-machine interaction and easy detection and maintenance.
2. Multi-way valve: The multi-way valve is arranged in front of the cab, which is easy to maintain.
25mm robot 12v dc gear motor with gearbox and gear reduction
Small size dc gear motor with low speed and big torque
37mm 25mm gear motor provides 1.0N.m torque and more reliable
Suitable to small diameter. Low noise and big torque application
DC gear motor can match encoder, 11ppr
Product description:
6mm planetary gearbox is widely used in
1. Toy,Remote control, Robot, amera, Robotic hand, Toy, Remote control device, and etc.
2.Low noise,low current,no vibration,and long service life
5.Reduction Ratio:136:1
4.Size:6.0*18.7 mm,just 9.3 mm length mini motor
5.We can offer the samples first,the MOQ is 1000 pieces,the delivery time is 20-40 days
M10 DC motor plastic gear 12v electric motor for door-lock
SPECIFICATION:
1. Voltage: DC 1.5V
2. No load speed: 45�±10%rpm
3. No load current: 0.032A
4. Diameter 10mm, length 20mm, shaft dia 1.5mm
5. Material: plastic gear and metal DC motor
6. Weight: 10g Approx
7. Application:Robot, Bike lock, Home Appliance, Door Lock etc
8. Customized,Adjust the performance at free(voltage, speed, torque)
M10 DC motor plastic gear 12v electric motor for door-lock
SPECIFICATION:
1. Voltage: DC 1.5V
2. No load speed: 45�±10%rpm
3. No load current: 0.032A
4. Diameter 10mm, length 20mm, shaft dia 1.5mm
5. Material: plastic gear and metal DC motor
6. Weight: 10g Approx
7. Application:Robot, Bike lock, Home Appliance, Door Lock etc
8. Customized,Adjust the performance at free(voltage, speed, torque)
Low voltage motors are classified primarily according to their fundamental physical differences, and secondarily, according to their purpose of use. Accordingly, we divide motors into two ranges of induction motors, four types of motors for explosive atmospheres, frequency controlled motors, most notable of which are synchronous motors, and special application motors. The last category of motors include, for example, marine motors, brake motors, and smoke extraction motors, which are based on the basic induction motor but have modifications that vary according to the purpose of use.
Their features are not further described here.
(A) Standard induction motors:
We supply two types of low voltage induction motor series: Process performance and General performance motors. The first are the most commonly chosen induction motors for demanding industrial uses. General performance motors form the basic motor series in the IE2 efficiency class.
(B) Motors for explosive atmospheres:
The low voltage motors for explosive atmospheres, or so called Ex-motors, comply fully with the ATEX directive 94/9/EC, which sets forth the mandatory duties and responsibilities of the supplier of products.
Motors for explosive atmospheres are available from the range of 0.25 kW up to 1000 kW.
(C)Frequency controlled motors:
Frequency controlled motors refer to motor series that are invariably used together with a frequency converter. This category of motors includes two types of synchronous motors, namely synchronous reluctance motors and permanent magnet motors, as well as roller table motors, high speed motors and servomotors.
We supply three types of Medium Voltage Motors: Standard, Engineered and Motors with Variable Speed Drive.
Standard motors are available of up to 750 kW
Medium voltage engineered induction motor range of up to 2800 kW. Engineered motors are made according to customers' specifications. All the engineered motors are configured and optimized for each order and application.
Motors for low voltage Variable Speed Drives range of up to 2240 kW. The basic mechanical construction is the same as engineered motors. As with the engineered motors all the motors with Variable Speed Drives are configured and optimized for each order and application.
We supply three types of Medium Voltage Motors: Standard, Engineered and Motors with Variable Speed Drive.
Standard motors are available of up to 750 kW
Medium voltage engineered induction motor range of up to 2800 kW. Engineered motors are made according to customers' specifications. All the engineered motors are configured and optimized for each order and application.
Motors for low voltage Variable Speed Drives range of up to 2240 kW. The basic mechanical construction is the same as engineered motors. As with the engineered motors all the motors with Variable Speed Drives are configured and optimized for each order and application.
