Pink salt lamp and glass.Export
Bonny Light Crude Oil
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.25-7.5mm Item: Single-Layer Corrugated Pipes Protection Rating: IP65 Structure: Bellows inside and outside Certification: ISO9001 Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Standard: OHSAS 18001 Specification: AD7.0MM-AD106.0MM OD: 7.0-106.0mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines. Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material. Advantages and properties: - They do not rot and corrosion; - Resistant to chemicals; - Resistant to external loads and shock resistance; - Waterproof and resistant to moisture; - Non-conductive, so they eliminate the risk of electric shock if cable damaged; - They provide protection against mechanical damage; - Long life of at least 50 years; - They retain their characteristics and properties during the entire lifetime; - They have a wide operating temperature range; - They can be laid open and a closed manner; - These types of cables are flexible and do not need additional coupling fittings; - These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables; - For the installation they do not require special skills and special equipment; - They are lightweight, easy to carry, for loading/unloading, handling and storage; have a low cost; - They have environmentally friendly and safe material. Material HDPE Application Areas: 1.Protection of high and low-voltage conductors from mechanical impacts 2.Protects environment from aggressive impacts when cabling under ground 3.Concealed mounting inside of concrete and installation 4.Sewage, ground and storm water disposal Working temperature: From -40ºC till+90ºC Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Pipe wall color can be changed with the consent of consumer.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor. Packaging & delivery: Depends on your order. Description: Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Item: Winding Pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black (inside yellow) Standard: OHSAS 18001 Specification: As your requirement OD: 800-3500 mm Length: 1-6 meters ( in specific order 12-18 meter) Packaging & delivery: Depends on your order. Description: Winding pipes of large diameter,high and low pressure.Standart length of this pipes: L= 6 meters.This length makes easy to package them in a raw,storage and transporting.Possibility: 1-6 meters for special targets.Some situation needs pipes with length,larger than standart,and less number of joints,so we could offer pipes of 2-3 sections with length 12 and 18 meters. Nominal diameter of the pipe corresponds to its inner diameter. Applied wall construction leads to the simplicity and strength of the pipe ring. Compared with other pipes, they dare less weight and wall structure of these pipes allows a higher tolerance to static loads. Structural rigidity depends on the type of profile. Profiles type PR: This type has a smooth inner and a ribbed outer surface. Low weight can be obtained a high hoop strength. Profiles type OP: This profile type also has a smooth inner and a ribbed outer surface. The external profile has the shape of "Olympic rings". It is also light weight and high strength ring.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 2.7-12.5 mm Item: three-layer fiber glass pprc Rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 16-75 mm Length: as your requirement Packaging & delivery: Depends on your order. Description: Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices. Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed. • Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.
Russia origin diesel gas d2 oil gost 305 82,russia origin mazut m100 gost 10585/75/99,russia origin aviation kerosene colonial grade 54 jet fuel,virgin fuel oil d6,liquefied petroleum gas. gost 20448 90,iquefied natural gas (lng) liftable quantity,fuel oil cst 180,urea 46% prilled & granular (russian origin),sulphurgranular,russia origin jet a1 fuel,diesel gas oil ultraâ??low sulphur diesel,base oil: (all types),gasoline octane (all types),light cycle oil(lco),bitumen grade60/70 and 80/100:,gasolene 89 octanes,travertine,marbel,silica sand,talc, phosphate.
We the management of ES-KINGS PROCUREMENT AGENCY BAKU would like to introduce to you our crude Offer - Sale of Bonny Light crude oil (BLCO): API grade - 34 to 37 Delivery basis - CIF and FOB (if the Buyer has a VLCC) Product loading point - NNPC Bonny Terminal, Rivers State, Nigeria Quantity - up to 10 million BBLs per month (2 million BBLS per shipment) Seller will provide 2% performance bond upon confirmation of SBLC instrument from the Buyer. Price - The price to be paid shall be based on â??Dated Brent' as published in the Platt's Oil Gram Report. The price shall be calculated on the three (3) days average mean quotation, one day before bill of lading date, bill of lading date and a day after bill of lading date. Discount - Gross 11 USD/bbl, Net to Buyer 6 USD/bbl, Commissions 5 USD/bbl split 3 USD/bbl Seller and 2 USD/bbl Buyer Facilitators. we also have AGO crude oil
Bonny light crude oil.
Glass partitions represent a very good designer solution. They visually extend the room space and improve movement of light. Fully transparent all-glass partitions and doors can be used in office, production and trading premises as well as for facade shopwindow glazing. Furthermore, translucent structures can represent different models: various degrees of mattness and tint, decorated with fretwork and logos. Stained-glass windows are most popular of them. Glass partitions are fabricated of up to 20 mm thick shutterproof tempered glass, which improves the light flux up to 85%. Glass Partitions Provide The Following Advantages The all-glass partitions represent an advantage in that they do not visually cumber the rooms or obstruct the light flux. The all-glass office partitions and doors are secured to walls and ceiling with special fasteners; this is an advantage compared to frame-type translucent partitions as their installation takes less time and is easier, plus there is no need to use non-transparent fastening elements. A glass partition today is not only a cost effective and convenient but also a lovely item. Such partition will fit just nice into the interior. Office glass partitions installed in premises allow deploying a big number of employees due to the better noise suppression. This helps improve the psychological environment and ensure it benefits the productive teamwork. The thick shutterproof glass keeps warmth inside and creates a cozy atmosphere to each employee’s request. The glass partitions and doors are durable, heat-resistant, require no maintenance and are virtually safe.
Application: used in production of lacquer materials designed for improvement of colouring agent wet-out and dispersion, increase of sedimentation stability of pigment suspension for 20-30%, reduction of light organic pigment flotation, dispersion time reduction for 30-50%. Due to surface activity and complete compatibility with different organic solvents, copper naphthenate is adsorbed on pigments, decreases discharge of main desiccants for 25-30% at the same time possesses activity synergism with Co and Mn, increases enamel coating firmness and reduces drying time to level 3. Trade dress: calcium naphthenate as a solution in white spirit. Appearance: unclouded homogenous light yellow liquid.
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
Translucent structures represent a convenient, functional and stylish decoration of various types of buildings and facilities. They look pretty well with business centers, shopping malls, and administrative buildings. They boast a light and elegant appearance but still maintain a serious yet fine exterior. The translucent structures enable to save on artificial lighting as they let in more sunlight. These structures are built using highest quality glass panes, which renders them, even greater advantages, namely noise and heat insulation as well as power saving ability. Translucent structures are about filling both horizontal and vertical planes of a building or facility with glass panes above an aluminum façade. Glass facades from our company represent minimum costs with always-high quality and versatility of designer solutions, which is a decisive factor for most satisfied customers who have already chosen Karvan-Glass.
Mono-ethylene glycol - or MEG - is a vital ingredient for the production of polyester fibres and film, polyethylene terephthalate (PET) resins and engine coolants. End uses for MEG range from clothing and other textiles, through packaging to kitchenware, engine coolants and antifreeze. Polyester and fleece fabrics, upholstery, carpets and pillows, as well as light and sturdy polyethylene terephthalate drink and food containers originate from ethylene glycol. The humectant (water attracting) properties of MEG products also make them ideal for use in fibres treatment, paper, adhesives, printing inks, leather and cellophane. MEG is a colourless, odourless liquid with a syrup-like consistency. 55% of MEG is used to make polyester fibres. 25% of MEG is used in polyethylene terephthalate - or PET - packaging and bottles.
Proofnasteel (proof list) is one of the universal materials of zinc galvanized steel that uses in building for construction of walls and interfloor partition (pouring-in flooring). Proofnasteel also uses like a covering material or in the capacity of roof floor. What does mean this material? Profnasteel is the profiled lists, fabricated from zinc galvanized steel (from0, 4 to 0, 1), which may be with polymer coating or without it. Proofnasteel has species diversity which differs with their thickness and size. All of these make possible to choose roof covering more suitable just You. Proofnasteel uses for construction of walls, fences and in fencing (fences of proofnasteel), but often in the roof materials ( roof Proofnasteel). Proofnasteel proof even in adverse weather conditions distinguishes from durability, simplicity of assemblage and has light weight. In the production of zinc coated proofnasteel uses zinc-galvanized steel of famous Russian and world producers. It gives guaranty that Your proofnasteel will be in high quality. Shaped sheet often uses in individual and low building, for example, in the construction of cottages, small magazines, refueling stations and booth. The main advantage of proofnasteel is its durability. Besides, this building material has many positive characteristics: proofnasteel is simple in installation, convenient for transportation, also distinguishes with its external high aesthetic view.
It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds. Main functions of a glass pane: natural lighting, thermal and noise insulation. Glass panes are categorized by manufacturing process: standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing. Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology. As defined in GOST 24866, glass pane are categorized as follows: by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on. by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm By glass type: regular energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type) noise-resistant triplex sun-screening tinted or film-coated glass shutterproof glass with a high protection class.
Electrical & Mechanical Equipment, Spare Parts , Fittings, Pipes, Components Made Stainless Steel And Other Materials .
We are offering you our finest hazelnut from Azerbaijan. Please kindly note that, we are distributing only organic hazelnuts from Oguz region. We offer you products from A to Z only based on world standards, which we are proving with the following certificates. Turkish quality standards TS-3075, TS-1917 and GMO/GMM certificate, BIO certificate, Phytosanitary certificate, Health certificate, Laboratory report, Certificate of Origin and etc. Specifications: Organic, natural sorted round levant Caliber: 11- 13 mm Moisture: Max 6% Rotten: Max 1 % Acid Value (FFA): 0.4% Shrivelled: 0.5% Capacity: 100 tonnes per month Packing: On request
Wet blue leather Feature: Stretch Material: Sheep Skin, leather Type: Grain Pattern: Wet Blue Use: Belt, Furniture, Handbag, Luggage, Sofa, Shoes, Lining, Curtain, Home Textile, activewear, Bags,Purses & Totes, Coat and Jacket, Costumes, craft, Home Decor Thickness: Variable Size: all sizes Place of Origin: Azerbaijan, Baku Brand Name: YES Model Number: leather Product name: Wet blue leather Features: 100% natural Usage: multi use Quality: high quality
Chicken Paws Quality: Grade A - Paws weight: Standard weight - Length: Minimum 8cm  Chicken Feet - Quality: Grade A. - Weight: 30 gr - 50 gr - Length: 7 cm to 15 cm Chicken MJW - Quality: Grade A - Weight: 40-60 grams per piece - Average length: 10-14 cm Whole Chicken  - Quality: Grade A - Weight: 900-1800 gr
