product details with these specification IP68 waterproof type, Microusb connector MicroUSB female waterproof type Vertical with screw hole to secure USB connector MICRO flat waterproof type female seat 2017 new waterproof type USB connector Waterproof / dustproof Micro connector Sealed MICTO connector Waterproof micro usb seat IPX7 super waterproof micro connector Microusb mattress board waterproof Xkb brand usb microphone usb microphone usbmicro seat Waterproof, m icro usb waterproof interface micro 5pab-type Female with screw hole all-inclusive waterproof. A-type waterproof micro 5p female usb waterproof ip67 with screw Hole + waterproof apron, 1394 side socket 6p pin 90 side insert 1394 female socket, 0.8 plywood micro usb female 5p plywood Copper case waterproof straight edge crimping, v8 smd male Micro usb 5p paopai smt / 3.0 board ultra-thin models, c-type 3.1 Mother usb 14p charge type-c mobile power 3.1 on-board type, 8p Positive and negative insert mother board af usb two-way straight Side 8p single row of double row of vinyl. The main products include: micro-usb connector, usb 2.0, Usb3.0, usb 3.1 connector, mini usb connector, hdmi (usb), Usb cable, connectors, phone connectors and various types of Connectors, terminal materials: brass (c2680), phosphor bronze (c5191). Shell material: brass (c2680), phosphor bronze (c5191), iron shell (spcc) Material: lcp / pbt can add 30% temperature agent Shell plating: nickel, tin plating tin, gold-plated Terminal plating: plated gold, plated half gold tin (contact point Plating gold): (1u, 3u, 5u, etc.)
1. It's made of high performance engineering plastic. 2.Locking 3-pin cinnector of the device,like middle,straight & pre-adaptation. 3.Unique blue-gray separable power input and output. 4.Fast and easy locking system. 5.Widely used in Audio,Video & Power equipment.
1. It's made of high performance engineering plastic. 2.Locking 3-pin cinnector of the device,like middle,straight & pre-adaptation. 3.Unique blue-gray separable power input and output. 4.Fast and easy locking system. 5.Widely used in Audio,Video & Power equipment.
1. It's made of high performance engineering plastic. 2.Locking 3-pin cinnector of the device,like middle,straight & pre-adaptation. 3.Unique blue-gray separable power input and output. 4.Fast and easy locking system. 5.Widely used in Audio,Video & Power equipment.
The Global components brand enterprise XKB Connector (XKB) today announced the TYPE - C mother bridge 14 pin and USB 2.0 mother seal interface, for the auto display car charger and the charger system designed to provide higher data transmission rates and flexibility. The type-c parent 14PIN and USB 2.0 mother-seat two-in-one interface product combination is one of the convenient combination connectors for ports and reliable performance on the market.The product has A TYPE - C port and usb dual function data communication channel, the data transmission rate of each channel can achieve highest TYPE - C at 8.0 A usb 5.0 A, so as to realize the transmission of high speed, can quickly meet the constantly promoting demand of quick charge data communication on the market.The simple two-for-one one-piece divided into/epoxy resin double-sided, and combined the single side, satisfy the customers have more flexibility and standard design, suitable for routing communication equipment, car navigation systems, charging fast filling in areas such as equipment, such as high speed network applications.At the same time, its compact design can further improve the space utilization. Product profile dimension :13.6*13.1mm life :10,000 features: two-in-one double-sided insert/single side insert optional. 1. Rated load: TYPT-C 8.0A USB2.0 5.0A. 2. Contact resistance: Ω 20 m or less 3. The insulation resistance: 100 m or more Ω DC250V 4. Resistance welding temperature: 250 �?? + 5 �?? 5. Humidity: less than 85%RH. 6. Plug life :10,000 Cycles. -
POLYMER INSULATOR EXTERNAL TYPE MEDIUM VOLTAGE SEPARATORS Polymer Insulator External type medium voltage separators are manufactured with fuse and grounded with fuse. They are designed for working at medium voltage networks up to 36 kV. They are manufactured according to TSE standards and TEDAÅ? Specifications. Separators are three phased and they can be manufactured as double poled monophase upon request. Separators are used for separating transmission lines in order to perform repair and revision works at certain parts of medium voltage networks. Therefore separated line can be seen easily. Separation mechanism can be delivered as manual controlled or drive controlled.
JCD type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. it is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing). It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection. JCD-0main wire: 10~25Branch wire: 1.5-16 Pull force:0.8Rated Current: 80 JCD-1 main wire: 35~50 Branch wire: 1.5-16 Pull force:0.8Rated Current: 80
Jcd type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. It is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing). It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection. Jcd-0main wire: 10~25branch wire: 1.5-16 pull force:0.8rated current: 80 Jcd-1 main wire: 35~50 branch wire: 1.5-16 pull force:0.8rated current: 80
JCD type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. it is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing). It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection. JCD-WX main wire: 16~240 branch wire: 1.5-16 Pull force: 1.2 Rated Current: 270
â?? Puncture structure, torque nut, to ensure the puncture pressure and it easy to fix â??Pressurized structure, corrosion protection and have a longevity of service â?? Small contact resistance, and connector temperature rise low â??Connect different diamater conductor, extensive application â?? Good insulation, 1KV withstand voltage is bigger than 4KV, 10KVwithstand voltage is bigger than 18KV JBC-2 Suitable conductor: Cu/Al wire Main Conductor Range: 35-50(mm2) Tap Conductor Range: 35-50(mm2) Bolt: 1 Color: Black
JBC-1 Main wire Range: : 35-70mm2 Tap wire range: 6-35mm2 Color: Black Bolt: 1
JBC-50-240 Main wire range: 50-240 Branch wire range: 50-240 Bolt: 2 Color: Black
TTD Insulation piercing connectors Model no. IPC3.1 main wire range: 95-16 Branch wire range: 25-10 Bolt: 1
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. Model No.: BLMT-25/95-13 Cross section range: 25-95 Bolt: M13
Description: blmt shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, acsr and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kv. Installation description: no need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command.
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire. The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot. This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor. The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications. Characteristics: Wide range of applications; Compact design; Can be used with almost all types of conductors and materials; Fixed torque and double shear head bolt ensure good electrical contact performance; Can be easily installed by using standard socket wrenches; Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV. Installation description: No need specialized tools to install; Only need a socket wrench to complete the installation; Including the provision of inserts; Double shear head bolt design with gradable torque to ensure reliable and firm contact; We recommend the use of a support tool to prevent the conductor from bending; Each connector or cable lug has a separate mounting command. BLMT-185/400-17 Cross section range: 185-400 Diameter of mounting hole: 17 Bolt: M22
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line. JXD-1 Main wire: 35-50 Branch wire: 35-50
JXLD series wedge clamp grounding clamp and insulation cover Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line. Main wire range: 35-95mm2 Branch wire range: 35-95mm2
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line. JXL-2 Main wire range: 120-150 Branch wire range: 120-150
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line. JXD-8 wedge clamp Main wire range: 185-240 Branch wire range: 70-95
