Flatpack2 380/3000 HE UI 380V Rectifier 241119.825
HE rectifier for 380VDC in data centers
The Flatpack2 380/3000 HE UI rectifier has high efficiency, ORing protection on output, and high output power.
Distribute pure battery backup DC voltage with a minimum of loss. Remove the low reliable DC-AC step in the central backup power system and maximize its reliability and efficiency.
Stack cabinets with up to 72 rectifiers to build large power systems monitored by the Smartpack2 controller.
The rectifier's Universal Input also allows it to be powered from the 380Vdc bus. Static voltage outputs (300-400Vdc) can be realized for 400Vdc remote powering and other applications.
Retrofit controller
Future fit power. It is a simple idea with tremendous effect: Replace your old first-generation Smartpack controller with the Smartpack R to make your power system ready for a high-speed, high-capacity, and connected tomorrow. This retrofit will bring your existing power system in line with current requirements, prolong its lifetime and thereby reduce both the lifetime operating costs and the need for
new investments in power.
Applications in these markets demand state-of-the-art, reliable, and safe DC power systems. Flatpack S delivers an industry-leading power density in its segment, many safety functions, a wide operating temperature range, and superb reliability in its small 217mm deep housing.
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.
ELTEK Flatpack2 HVDC/DC Converter DCDC 380/48 3000 SHE
INPUT DATA
Voltage (nominal) 381 VDC
Voltage (operating range) 260 - 400 VDC
Maximum current 12.3 ADC
Protection Fuse, shutdown when VIN is out of range
OUTPUT DATA
Voltage (default) 54.5 VDC
Voltage (adjustable range) 50 - 55 VDC
Max power, nominal input 3000 W
Max current, @VOUT = 50 VDC 60 A
Current sharing �±5% of maximum current from 10 to 100% load
Static voltage regulation �±0.5% from 0 - 100% load and nominal input
Dynamic voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Ripple < 150 mVPP , 30 MHz bandwidth
Protection Overvoltage shutdown, short circuit proof, high temperature, hot plug-in
inrush current limiting, OR-ing FET
ELTEK FLATPACK2 48V/3000W HE Rectifier Module 241119.903
INPUT DATA
Voltage (nominal) 176 - 275 VAC
Voltage (operating range) 85 - 300 VAC
Frequency 45 - 66 Hz
Current (maximum) 19 ARMS
Power Factor > 0.99 at 50-100% load
Protection Fuse in L & N, Varistor, Shutdown above 300 VAC
OUTPUT DATA
Voltage (default) 53.5 VDC
Voltage (adjustable range) 43.2 - 57.6 VDC
Power @ 230 VAC 3000 W
Power @ 85 VAC 1380 W
Current 62.5 A (@ 48 VDC)
Current sharing (10 - 100% load) �±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Hold up time, 1500 W / 3000 W output power >20ms / >10ms ; output voltage > 43 VDC
Ripple < 150 mV peak to peak, 30 MHz bandwidth
Protection
Fuse, Short circuit proof, High temperature protection, Overvoltage shutdown,
Hot plug-in inrush current limiting
87244 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
INPUT DATA
Voltage (nominal range) 206 - 264 VAC
Voltage (operating range) 85 - 264 VAC
Frequency 45 - 66 Hz
Maximum current 16 ARMS
Protection Fuse in Live, varistor for transient protection, shutdown when VIN is out of range
OUTPUT DATA
Voltage (default) 67 VDC
Voltage (adjustable range) 54 - 72 VDC
Max power, nominal input 3000 W
Max power, de-rated @VIN = 85 VAC 1000 W
Max current, @VOUT = 60 VDC 50 A
Current sharing �±5.0% of max current
Static voltage regulation (10-100% load) �±0.5%
Dynamic voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Hold up time (3000W load) >10ms; output voltage > 52.5 VDC
Ripple < 150 mVPP , 30 MHz bandwidth
Protection Overvoltage shutdown, short circuit proof, high temperature, hot plug-in inrush
current limiting, fuse
ELTEK FLATPACK S 2U HIGH-EFFICIENCY DC POWER SYSTEM
The Eltek Flatpack S 2U system is a high-efficiency power solution with an optimal footprint for up to 200A applications where space is limited â?? both in racks and various cabinet installations.
The Flatpack S 2U is a two rack-unit high system that delivers 24V and 48V DC power to telecom infrastructure that includes: 4G/LTE, FTTX, distributed antenna systems (DAS), microwave broadband, cable broadband, telephony servers and switches, and fiber-optics.
RECTIFIER PART NUMBERS (SOLD SEPARATELY)
241122.105.VC Flatpack S 48/1000 HE with CLEI
241122.125.VC Flatpack S 48/1800 HE with CLEI
241122.205 Flatpack S 24/1000 HE
241122.930 Flatpack S Blind Panel
Flatpack2, 2U Integrated DC Power supply system, 150A
Eltek Flatpack2 2U Integrated has been specifically designed to meet the demand for higher density and more compact power solutions. It is suitable for applications needing an expandable, easily serviceable, and reliable power supply, fitting within a minimal space.
Eltek Flatpack2 48/3000 SHE 241119.106
The Flatpack2 48V Super HE rectifiers are contributing to setting the new industry standard for efficiency in the DC power market.
With an efficiency of 97.8%, the Super HE is a premium rectifier particularly suitable for markets and applications where the energy is costly. In grid-connected applications, the payback time is down to 2 years compared to standard HE rectifiers, and in hybrid applications even faster.
The Flatpack2 Super HE is fully compatible with Flatpack2 and Flatpack2 HE systems and can replace any Flatpack2 48V rectifier module.
Flatpack2 48V SHE Rectifiers
Flatpack2 48V Super HE
48/2000 SHE
Eltek Flatpack2 48V Super HE rectifiers are contributing to setting the new industry standard for efficiency in the DC power market.
With an efficiency of 97.8%, the Super HE is a premium rectifier particularly suitable for markets and applications where the energy is costly. In grid-connected applications, the payback time is down to 2 years compared to standard HE rectifiers, and in hybrid applications even faster.
Eltek Flatpack2 Super HE is fully compatible with Flatpack2 and Flatpack2 HE systems and can replace any Flatpack2 48V rectifier module.
Eltek Scalable System 54kVA
MODEL 72 KW
Part number CTER3642.xxxx
INPUT DATA
Voltage range AC (3 phase Y) 320-475 V
Voltage range DC 40-58 V
Maximum current AC (per phase) 84-144 A
Frequency 50 Hz / 60 Hz
Power factor > 0.99
OUTPUT DATA
Adjustable range AC (3 phase Y) 346-415 V
Adjustable range DC 43-58 V
Max output power AC 54,0 kVA / 43,2 kW
Max output power DC 43,2 kW
Admissible load power factor 0 Ind. to 0 Cap.
Frequency 50 Hz / 60 Hz
Battery breaker (1-pole) 2*1600 or 4*600 A
OTHER SPECIFICATIONS
DC distribution 1 pole, 1-600 A
AC Distribution 1-3 pole 2-63 A
Manual Bypass Switch Internal
LVBD (1-pole) 1800 A
Scalable System 18-72 kVA, single input
MODEL 72 KW
Part number CTER3642.xxxx
INPUT DATA
Voltage range AC (3 phase Y) 320-475 V
Voltage range DC 40-58 V
Maximum current AC (per phase) 84-144 A
Frequency 50 Hz / 60 Hz
Power factor > 0.99
OUTPUT DATA
Adjustable range AC (3 phase Y) 346-415 V
Adjustable range DC 43-58 V
Max output power AC 54,0 kVA / 43,2 kW
Max output power DC 43,2 kW
Admissible load power factor 0 Ind. to 0 Cap.
Frequency 50 Hz / 60 Hz
Battery breaker (1-pole) 2*1600 or 4*600 A
OTHER SPECIFICATIONS
DC distribution 1 pole, 1-600 A
AC Distribution 1-3 pole 2-63 A
Manual Bypass Switch Internal
LVBD (1-pole) 1800 A
Eltek Micropack 48V/250W Rectifier
Micropack Wallbox
Power Supply System 12V/480W, 24V/960W or 48V/1000W
Compact wall-mounted power supply system
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
Power Supply System 12V/480W, 24V/960W, or 48V/1000W
Compact wall-mounted power supply system
Eltek Micropack wallbox has been designed for industrial and telecom applications with power requirements in the range of 120- 1000W. With its compact design and simple installation and optional
internal backup batteries make it a really â??microâ?? DC backup system.
Model Flatpack2 380/3000 HE (UI)
Part number 241119.825
INPUT DATA
Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1)
Voltage (range) 85 - 305 VAC / 260 - 410 VDC1)
Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1)
Current (maximum) @ nominal input, full load 18.2 ARMS
Power Factor > 0.99 at 50% load or more
Protection
Fuse in L & N
Varistor
Disconnect when VIN is out of range
OUTPUT DATA
Voltage (default) 381 VDC
Voltage (adjustable range) 300 - 400 VDC
# Pb cell supported 156 - 168 3)
Power continuous (maximum) 3000 W
Power @ 85 VAC / 85 VDC 1200 W
Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC)
Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) ±0.5%
Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5)
Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load
Ripple < 1000 mVP-P , 30 MHz bandwidth
Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short
circuit proof, High temperature protection, Overload shutdown4)
OTHER SPECIFICATIONS
Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6%
Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth,
3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary
Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage
shutdown on output, Fan failure, Low voltage alarm, CAN bus failure
Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out
of range, flashing at overvoltage
Normal (Green LED) Input and output ok
Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C
MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C)
Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing
Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F)
Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs)
DESIGN STANDARDS
Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL
60950-1:2014, CSA C22.2 No. 60950-1-07
EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010,
IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013
Environment
Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3)
Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating
conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised
2011/65/EU (RoHS) & 2012/19/EU (WEEE)
87244 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
