Sheet Metal (hrc, Crc, Gi), Metal Furniture, Metal Accessories, Enclosures, Panels And Stainless Steel Products.
Specification: Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - Fixed color â?? not dissolvable in water - Available in many colors ( Blue â?? grey â?? Red ) Application: - This rubber is used in the upper layer for paving playgrounds and other floorings - Kids Flooring. Storage: Store in dry conditions and keep away from any sources of heat and ignition. Material: SBR Relative density : 02. 0 �± 1.14 gm/cm�³ Size: - (2-1) mm - (4-1) mm
We supply standard and non-standard fasteners in different types and sizes . KG,Tons
Mechanical seals, oil seals, other types of seals, silicone sheets, o rings viton & nbr, motion transmission parts, teflon tapes, teflon bronze rods and bars, adhesives, meters, solenoids, foam, food grease.
Heavy machinery, medium machinery , brass scrap.
Aluminum & galvanized steel profiles, , Paver pedestal, , Oofing filter fabric, , Waterproofing membrane protection board, , Plastic sheetin, Fiberglass chopped strands mat (csm), , contractor clean up bags & stretch wrap.
Size: - (2-1) mm. - (4-1) mm This rubber is certified by FIFA. - Water resistant, UV resistant and Heat tolerance is 70. - Lightweight and durable. - This rubber is recommended for use in Roofing or Road Flooring. - sport Flooring, - Automotive industry, construction and Geotechnical/Asphalt Applications Material: automotive and truck scrap tire Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³ Color: Black
Dimensions: Width: 300*400 & 350*450 & 250*400 & 600*700 mm According to loads and customer needs. Height: 8 - 200 mm According to loads and customer needs. Types: - Type (C2): laminated bearing with elastomer comprising steel reinforcing plates in layers and with smooth steel plates in top and bottom. - Type (C4): laminated bearing with elastomer comprising steel reinforcing plates in layers and with shaped steel plates in top and bottom. - Type (B): laminated bearing fully covered with elastomer comprising steel reinforcing plates. - Type (F): Plain Pad bearing, Block from Neoprene Rubber Description: Neoprene Bearing Rubber Pads provide a uniform transfer of load from beam to structure. They permit rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound transfer, while reducing the destructive action of vibration between movable and stationary members. They also provide for movement caused by normal expansion and contraction. Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25- Elastomeric Bearings, and EN13373-, and AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Seventeenth Edition, M251. Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete buildings. Also used in industrial machinery and heavy equipment applications
Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
Dimensions: - MC001AVM: Dia: 44* Height: 41 mm - MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm) Features: Easy-to-install Universal Mounts - Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment. - Designed for shock load damping. - It withstands up to 50 kg per piece and must be installed on a circular fitting base. Physical Specification: - Hardness (Shore A): 40 - 80 - Tensile Strength (MPa): 4 min. - Elongation at break (%): 280 min. Color: Standard: Black Applications: - Anti-vibration Rubber. - Noise Absorption Rubber. - Engine, Generator, Motor, Compressor, etc
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Aluminum & galvanized steel profiles, paver pedestal, roofing filter fabric, waterproofing membrane protection board, plastic sheeting for roofing and dry walls, fiberglass chopped strands mat (csm), contractor clean up bags & stretch wrap.
Pvb scrap.
Aluminum & galvanized steel profiles, Paver pedestal, Roofing filter fabric, Waterproofing membrane protection board, Plastic sheeting for roofing and dry walls, Fiberglass chopped strands mat (csm), Contractor clean up bags & stretch wrap.
