This rubber is certified by FIFA.
- Water resistant, UV resistant and Heat tolerance is 70.
- Lightweight and durable.
- This rubber is recommended for use in Roofing or Road Flooring.
- sport Flooring,
- Automotive industry, construction and Geotechnical/Asphalt Applications
Material: automotive and truck scrap tire
Relative density @ 15 : 02. 0 �± 1.14 gm/cm�³
Color: Black
Description:
These Rubber Bumpers are made from a hardwearing blend of EPDM and
available in various sizes. The rubber buffers protect against harsh impacts, they
can be bolted directly to the desired surface using the pre-drilled counter sunk
holes.
Size:610*210*130mm
Color: Black - Black and Yellow
Material: EPDM
Operating temperature Range: -15C to 70C
50 Automotive Batteries Suppliers
Short on time? Let Automotive Batteries sellers contact you.
1-Black Rubber Bumper
Dimensions:
50cm*50cm
Description:
- It helps align parked cars and control speed in driveways, parking lots, and roads. It
Prevents vehicles from pulling through parking spots and keep cars a safe distance from
each other in parking lots and keeps speeds low in high-traffic areas.
- The size of bolt that use to install it, is 25 mm.
- Maximum height: 5cm - 7cm.
- It has a place to pass power cables under it and place to put a night reflectors.
Applications:
It is used to make the speed slow in garage, tourist
village, places to wait, schools and club
Material: EPDM Rubber
Color: BLACK
Life Span : 5:10 years - according to how to use it
2- Black and Yellow Rubber
Dimensions: 40cm*100cm*5cm.
Weight: 18 kg
Description:
It helps align parked cars and control speed in driveways, parking lots, and roads. It
Prevents vehicles from pulling through parking spots and keep cars a safe distance from
each other in parking lots and keeps speeds low in high-traffic areas.
- The size of bolt that use to install it, is 25 mm.
- Maximum height: 5cm - 7cm.
- It has a place to pass power cables under it and place to put a night reflectors.
Application:
- It is used to make the speed slow in garage, tourist village, places to wait, schools and club
Material: Natural Rubber & SBR
Color: BLACK & Yellow
Life span: 5:10 years - according to how to use it
Dimensions:
Width: 300*400 & 350*450 & 250*400 & 600*700 mm According to loads and customer needs.
Height: 8 - 200 mm
According to loads and customer needs.
Types:
- Type (C2): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
smooth steel plates in top and bottom.
- Type (C4): laminated bearing with elastomer comprising steel reinforcing plates in layers and with
shaped steel plates in top and bottom.
- Type (B): laminated bearing fully covered with elastomer comprising steel reinforcing plates.
- Type (F): Plain Pad bearing, Block from Neoprene Rubber
Description:
Neoprene Bearing Rubber Pads provide a uniform transfer of load from beam to structure. They permit
rotation at the bearing point due to deflection or misalignment. They absorb vibration and prevent sound
transfer, while reducing the destructive action of vibration between movable and stationary members.
They also provide for movement caused by normal expansion and contraction.
Meets Standard Specifications for Highway Bridges, Fourteenth Edition 1989, Division II, Section 25-
Elastomeric Bearings, and EN13373-, and AASHTO Standard Specifications for Transportation Materials
and Methods of Sampling and Testing, Seventeenth Edition, M251.
Neoprene Bearing Pads are used extensively in bridge structures and prestressed and precast concrete
buildings. Also used in industrial machinery and heavy equipment applications
Applications:
1. Tire manufacturing and Tire retreading.
2. Car mats.
3. Extruded articles.
4. Rubber Roll and flooring.
5. Tyres
6. Hoses.
7. Shoe sole sheets
8. Conveyer belts and many rubber products.
Storage:
Store in a cool & dry place below 60�°C away from sources of heat or ignition.
Packing:
Put on wooden or PVC pallets and covered by plastic film stretched or in PVC bags 25kg.
Health & Safety:
Detailed advice on the Health & Safety aspects of this product is givin in the individual product
Safety data sheet (SDS), available upon request.
Dimensions:
- Width*Length: 36cm * 107cm
- Height: 5 cm
Purpose:
- Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron.
Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can
slide freely along the angle iron to meet the expansion deformation of main grid.
- Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion
joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear
deformation in the telescopic channel helps the whole device to realize telescopic motion.
Features :
- Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and
have a long service life.
- Wear resistance, corrosion resistance.
- Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians.
- During installation, bolt holes on the bottom and each junction are filled with adhesion
agent which makes the whole rubber bridge expansion joints be highly water-resistant.
- Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise.
Material: Rubber & Steel Plates.
Applications:
- Rubber bridge expansion joint is used in expressway.
- Rubber Bridge expansion installed in the end of bridge.
- Rubber bridge expansion joint is used flyover.
- Rubber bridge expansion joint is used in connection of bridge
- Manufactured from durable EPDM rubber.
- High UV & Ozone resistant
- Fast & easy installation.
- Maintenance Free
- Provides a permanent seal for any type of construction
- Allows exerting a continuous and uniform force against the joint walls.
Applications:
- Bridges
- Parapets
- Cark parks
- Buildings
- Tunnels
- Water treatment plants.
Dimensions:
Width: Up to 1500mm
- Length: up to 20,000mm according to thicknesses
- Thickness: 3mm - 25mm according to use and applications.
Description:
Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet
offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion.
Material : Natural Rubber and Synthetic Rubber
Physical Specification :
- Hardness (Shore A): 5 + 50
- Tensile (MPa): 3.5 min.
- Elongation at break: %300
- Abrasion max: 150mm3
- Temperature Range: 20-c to 70+c.
Color: Standard Black
Optional (Beige, Grey).
Applications:
1. Shot blasting rooms.
2. Parking areas.
3. Wall lining for workshops and factories.
Dimensions:
- MC001AVM: Dia: 44* Height: 41 mm
- MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm)
Features:
Easy-to-install Universal Mounts
- Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment.
- Designed for shock load damping.
- It withstands up to 50 kg per piece and must be installed on a circular fitting base.
Physical Specification:
- Hardness (Shore A): 40 - 80
- Tensile Strength (MPa): 4 min.
- Elongation at break (%): 280 min.
Color: Standard: Black
Applications:
- Anti-vibration Rubber.
- Noise Absorption Rubber.
- Engine, Generator, Motor, Compressor, etc
Dimensions:
450*350 mm
- Thickness: 20mm And many different sizes according to customer requirements
Purpose:
Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration
Material: Mix from SBR and Natural Rubber
Size:
- Length*Width: 150*150 cm.
- Thickness: 12mm
Advantage of this Tille:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.
Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our customer feedbacks.
- Endurance is more than 2 tons per square meter.
Color: Black.
Applications:
- It is used in sport halls and locations that need Shock absorbers and safety flooring.
- It is used in kidsâ?? areas and schools.
Specification:
Water resistant, UV resistant and Heat tolerance is 70.
- Lightweight and durable.
- Fixed color â?? not dissolvable in water
- Available in many colors ( Blue â?? grey â?? Red )
Application:
- This rubber is used in the upper layer for paving playgrounds and other floorings
- Kids Flooring.
Storage: Store in dry conditions and keep away from any sources of heat and ignition.
Material: SBR
Relative density : 02. 0 �± 1.14 gm/cm�³
Dimensions:
Width: Up to 1500mm
Length: Up to 50 m.
Thickness: 1.5 - 50 mm.
General Description:
EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance.
Features:
Chloramine resistant
Good heat and compression resistance.
Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid).
Resistant for air conditions.
Applications:
Automotive: Weather stripping and seals.
Wire and cable harnesses.
Window spacers.
Hydraulic brake systems.
Door, window and trunk seals
Roofing: Roof membrane.
Roof coating.
RV roof.
Industrial: Water system O-rings and hoses.
Tubing, grommets, and belts.
Electrical insulations and stinger covers.
Description:
MARSO CLM COL Gard is designed to protect
the edges of columns in structures.
Materials:
MARSO CLM Col Gard is made of a high impact resistance extruded rubber profile.
Standard color is black. Yellow reflective cover strips are available on request.
Range of sizes:
The gard is available with or without galvanized
metal insert clips with various dimensions.
Standard lengths:
The standard lengths of MARSO CLM Col
Gard are 1 meter and 1.2 meters.
Other sizes can be provided upon request.
Installation:
Place clip on the wall at a distance of 100 or 150 mm from the finished floor
level and
mark the holes positions on the wall.
* Drill holes in the wall by using suitable drill bits.
* Fasten the clip to the wall using M6/M8 screws and plastic plug.
* Slide the rubber gard from the sides. Clean the Corner gard using dry cloth to
clear dust.
Alternatively they can be fixed to the column surface using the BASF epoxy resin
Wing Length CLM65: A=65 , B=65
CLM: with clips AD: without clips adhesive type
Dimensions:
- Width*Length: 11cm * 3.2m
: 8cm * 3.2m
- Thickness: 2cm
Description:
To prevent low of water past a closed gate, seals are provided either on the gate or on the
metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Dimensions:
Width*Length: 15cm * 13m
: 2.5cm * 13m
- Thickness: 1 cm
Description:
To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Dimensions:
- Width*Length: 20cm * 12m
- Thickness: 1 cm
Description:
- To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich
