Find Verified Drilling Machines Tools Suppliers, Manufacturers and Wholesalers

Emcf face cutter

Iso inserts, selt, selw, sekt seht sehw suitable.
High metal removal.
High feed rate.
Roughing to finishing.
Over 15 kinds of grades & 5 kinds of chip breaker.


Diameter from 50 - 160 mm

Tbra

Iso insert, tcgt, tpgt suitable
Side-lock
Unique hexagon slide
Fine adjustment & high precision
Excellent internal structure without backlash



Diameter from 20 - 100 mm
The accuracy of one unit is 0.01 mm

Heavy duty pillar drill machine

Model no. 38kpt
Drilling capacity in steel 38mm
No. Of spindle speed 8
Range of speed 70-1910 rpm
Morse taper in spindle nose mt-4
Dist. Between spindle center to column face 270mm
Quill movement 250mm
Working surface of the table 440mm
Dimension of base plate 760x480mm
Working surface of base plate 500x350mm
Max. Dist. Between spindle nose to baseplate 1000
Max. Dist. Between spindle nose to table 565mm
Center dist. Between foundation bolts 620x335mm
Diameter of column 112-60
Fine feed attachment
Motor kw / speed 1.5hp / 960rpm
No. Of v.Belt b-55
Nett weight of machine 350kg
Standard accessories: motor pulley, instruction manual, drill drift.
Extra accessories: electric motor, drill chuck & arbour, v.Belt, r.F switch.



Wooden case packing, goony packing, export packing

Redial drill machine

Model: 40krdfa (all geared autofeed redial drill machine)
Capacity (m.M)
Drilling in steel 38
Drilling in c. I. 40
Tapping in steel 32
Spindle
Spindle travel 150
Spindle taper mt-4
No. Of spindle speeds 8
Range of spindle speeds 70-1190
No. Of feed 03
Feed value mm / rev. 0.1 0.2 & 0.3
Working range
Column diameter 220
Max. / minimum dist. Between spindle centre to column face 890/370
Max. / minimum dist. Between spindle nose to base plate 1150/490
Vertical movement on column of railarm 660
Size of base plate 1365 x 715
Working surface of table 350x310
General
Number / centre distance of "t" slots for base plate 2-138
Size of "t" slots for base plate m-16
Number / centre distance of "t" slots for working table 2-80
Size of "t" slots for working table m-16
Nett. Weight of the machine (approx.) 1500 kg.
Shipping dimension of the machine 2200x1530x1115
Power
Drilling head motor 1. 5 h. P. / 3ph-50hz / 1440 rpm
Arm elevating head motor 0. 5 h. P. / 3ph-50hz / 1440 rpm
Standard accessories
Electrical equipment with wiring, drilling head motor,
Arm elevating motor, instruction manual, motor pulley, drill drift.
Extra accessories
Working box table, machine lamp, coolant pump with accessories,
Reversible switch, 'v' belt (b-47 / a-23), quick chain chuck,
Drill chuck-arbour etc.
Specification may be changed without prior notice in case of design modification

Model: 32krdf
Drilling in steel 32
Drilling in c. I. 32
Tapping in steel 25
Spindle travel 150
Spindle taper mt-3
No. Of spindle speeds 10
Range of spindle speeds 55-1571
No. Of feed 03
Feed value mm / rev. 0.1 0.2 & 0.3
Column diameter 160
Max. / minimum dist. Between spindle center to column face 810/320
Max. / minimum dist. Between spindle nose to base plate 1140/295
Vertical movement on column of railarm 845
Size of base plate 1365 x 715
Working surface of table 350x310
Number / centre distance of "t" slots for base plate 2-138
Size of "t" slots for base plate m-16
Number / centre distance of "t" slots for working table 2-80
Size of "t" slots for working table m-16
Nett. Weight of the machine (approx.) 1150 kg.
Shipping dimension of the machine 2100x1430x1015
Drilling head motor 1. 5 h. P. / 3ph-50hz / 1440 rpm
Arm elevating head motor 0. 5 h. P. / 3ph-50hz / 1440 rpm
Standard accessories: electrical equipment with wiring,
Drilling head motor, arm elevating motor, instruction manual, motor pulley, drill drift.
Extra accessories: working box table, machine lamp, coolant pump,
Reversible switch, 'v' belt (b-47 / a-23) drill chuck-arbour etc.

Model no. 38kpf
Drilling capacity in steel 38mm
No. Of spindle speed 8
Range of spindle speed 100-1860 rpm
Morse taper in spindle nose mt-4
Spindle center to column face dist. 260mm
Spindle travel 150mm
Working surface of table 440mm
Dimension of baseplate 700x430mm
Working surface of base plate 460x330mm
Max. Dist. Spindle nose to base plate 1080mm
Max. Dist. Spindle nose to table 635mm
Center dist. Between foundation bolts 610x335mm
Diameter of column 112.60mm
Power required 1.5hp
Motor speed 1440 rpm
No. Of v.Belt b-56
Nett wight of machine 425kg

Wooden case packaging, goony packing, export packing

Crackag

I have learned about your company from the website. This is sara from sino-expansion co., ltd. Here i would like to take this opportunity to introduce our company and products(crackag) to you:

We are one of the largest manufacturers of non-explosive cracking agent(mortar)in china. Crackag is a kind of expansive chemical product, which is very popular in the international quarrying and demolishing market.

When it is mixed with clean and cold water to be mortar and poured into pre-drilling holes of rock and concrete, it swells and exerts expansive capabilities on the hole-wall at a unit value of more than 50mpa (500kg/cm2 .) which is strong enough to cut and crack reinforced concrete, marble and granite after a while.

Copmare to the traditional explosives, it has the following advantages:
1)non-explosive and very safe
2)very economical and cost-effective;
3)the shape is controllable

Drills

Standard: API 5D
Specification: OD: 2 3/8í¦-6 5/8í¦
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardbanding: ARNCO 100XT, 200XT, 300XT, BOTN3000, ARMACORM
Length: R1: 5.49-6.71m R2: 8.23-9.14m R3: 11.58-13.72m

Drill machine is equipped with 4 drilling heads. Drill holder is capable of drill from 3 mm. To 14 mm. Machine is equipped with duel speed motor to obtain fine results on different kinds of paper and is fitted with automatic table lift system. Drill machine is made of rigid steel to avoid any friction.
Specifications:
Required space L x w x h 2050 x 2300 x 2500mm
Working height 950 mm
Drill bit speed 1400 mm
Stroke speed 11 or 22 strokes/min.

Power supply
Voltage 400 v
Phase 3 ph
Frequency 50 hz
Connection in value 1.7 kw

25 To 38 mm Universal Radial Drill Machine
Specification Model
Drilling Capacity (in Mild Steel) 25 mm
Pillar Diameter 125 mm
Spindle nose to table distance 410 mm
Spindle nose to base distance 660 mm
Distance from Spindle centre to Pillar face 670 mm
Taper in Spindle MT.3
Number of Speed 8 Speed
Range of Speed 90 to 2300 RPM
Table Size 250 x 200 x 200 mm
Base Size (Machined Area) 500 x 600 mm
Overall Base Size 925 x 600 mm
Spindle Travel 220 mm
Pillar Length 1220 mm
Overall height with pulley Guard 1425 mm
V. Belt Section B. 43" & A. 23"
Weight (Approx) 500 Kgs
Motor 1440 RPM 3 Phase 440 Volts 1 HP & 0.5 HP

Jig Saw M1Q-MD-65
Cutting Capacity:65mm
No_Load Speed:0-3100r/min
Rated Input power:650W
Rated Volatage:110/240V
Rated Frequency:50/60Hz

2000 horse power drilling rig

Mud pump

300pcs combination drill set (7pc twist drill, 5pc super masonry drill, 5pc carpent drill, 17pcs bits and other screw nails),

Abs plastic box

D.T.H. drilling rig

Drill bits

Feature
1. ííThe spindle speed and feed change are affected by their eparate machine levers, and therefore easily and accurately conrtrolled.

2. ííThe cutting depth is controlled by the drill depth stop. Thus the drill can automatically stop.

3. ííThe spindle head and the arm as well as column are reliable clamped by means of clamping mechanism, which makes easy maintenance possible.

4. ííThe spindle head movement and the arm rotationg are light and quickíú

5. ííThe arm is raised and lowered by a couple of gears. The arm elevating unit is provided with mechinical and eletrical safety.

6.ííThe guideways of the arm, the outer and inner cloumns are wear-resistant for long service life.

1. ííThe special motor for high-frequnency clockwise and conter-clockwise ratation is adopted and max, tapping ftrquency is 50 times per miunte.

2. ííThe feed mechanism with clearance spring is driven by change-gears and is suitable for excruding taps.

3. ííThe tappping depth can be adjusted addutely by the tapping-depth-stop.

Tank drilling machines