Specification: 1).size: 2'', 3'', 4'' 2).working pressure:6000-20000psi(42Mpa-140Mpa) 3).working temperature: -29°C~121°C. 4).application enrvironment: standard or H2S 5).Standard: API standard Introduction: 1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa). 3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment. 6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
General Instruction: We offer a complete line of single & double and triple tube core barrels, which willl provide superior performance and obtain the full recovery of the sample in any application of diamond core drilling. Using a wireline system, core is recovered quickly by retrieving the inner tube directly through the drill string. The rods remin in the hole until the bit needs to be replaced. This has big cost advantages when drilling deep holes for mineral exploration. The core barrel assembly is composed of the inner-tube group and outer-tube group. Advantages: 1.Faster coring at greater depths 2.Good stability due to constant diameter of the drill string 3.excellent hydraulics 4.Good core recovery
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Lifting Subs are of one-piece construction and manufactured from alloy steel fully heat-treated. The structure includes sloping shoulder and straight shoulder, which can be selected by customs. Lifting Subs are normally manufactured 1200mm long overall. But this type sub can be made to any length desired.
Jsl-500 power tools mini drill , �mini drill Mini craft drill, �packed in plastic box With on/off switch Good quality: all the products are 100% qc. Oem accepted: we can produce according to your design. Model, voltage, ctn size (cm), qty/ctn, g.W/n.W(kg) Jsl-500, 12v/0.8a, 43, 37, 31, 20pcs, 15/12 Containing 1. 5pcs high speed steel drills (0.51.01.52.5, 3.0mm), � 2. 5pcs brass collets (0.51.01.52.5, 3.0mm) 3. 4pcs grindstones with arbour 4. 1 pc super thin grinding wheels
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH) Connection: Direct connection with drill pipe, Octagonal connection, Side-opening Octagonal connection back-load transmitter housing Standard connection side -load transmitter housing Choose the suitable drill bit based on different soil condition to improve construction efficiency. Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut. Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits. All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
1. Barrel reamer-2: Specification: Size: 200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 2. Cutting reamer: Specification: Size: 200-2000mm Suitable for hard soil and strong-mantle rock. Connection with drill rod: Direct connection with drill rod Octagonal connection 3. Barrel reamer-3: Specification: Size: 200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 4. Barrel reamer-1: Specification: Size:200-2000mm Suitable for soft soil. Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel 5. Fluted reamer: Specification: Size: 200-2000mm Suitable for sand and medium-to-very hard soil. Structure: Steel casting, Welded Connection with drill rod: Direct connection with drill rod Octagonal connection Connection with laid pipe: Within or without swivel
1. PDC Matrix Body bit Type and feature PDC bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings. 2. PDC Matrix Body Core Bit Type and feature PDC core bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type 75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc. 3. PDC Steel Body Bit Type and feature PDC bit can be customized for oil well,water well, mining, explorer well drilling. Suitable formation Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble. Main type Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings 4.PDC Drill Bit Body & Cutters Welding PDC body(matrix) Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc. 2.PDC body(steel) Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc. Core bit body(matrix or steel) Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc. 4.PDC cutter and Welding OEM PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods. Specification: 1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy. 2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard. 3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications. 4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions. 5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes of outer diameter after abrasion of drill collar. They are with light weight, large handling scale and reliable quality. This kind of slips are designed and manufactured according to API Spec 7K Specificationfor drilling and well servicing equipment.
Our PDC bits are designed with newer abrasion-resistant cutters, and bit designs matched to your specific project lower drilling cost with 1.higher average ROP 2.greater stability 3.greater durability 4.Greater efficiency Drill longer: Our engineers developed a group of cutters for the specific wear issues you encounter. This is the optimum balance between cutter durability and cutter effectiveness with a lower probability of fracture. PDC bit Specifications 1. High wear resistance cutters. 2. Oppose-circumnutation design. 3. suitable for medium to hard formation For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
Hole openers are used to enlarge the diameter of a pre-drilled hole. They are custom built to specification, and come in a wide variety of sizes. A hole opener is sometimes referred to as a reamer. Roller cone hole openers are specifically designed for horizontal, rock drilling applications. Extensive tool performance experience combined with the pooling of hole opener expertise from various industries (directional crossing, mining and oil field) has aided in designing and manufacturing a proven line of horizontal hole openers for the trenchless construction industry. Our approach to tool application analysis and tool set-up recommendations includes cutting structure selection, hydraulics and torque and drag analysis. This comprehensive approach enables us and the contractor to minimize the number of reaming passes and optimize hole opener performance. For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
Tricone Roller Bits All sizes and IADC codes of drill bits are available. Special requirements of different models can be customized. 1)Main features 1. Cutting Structure of this type sealed and non-sealed tci tricone bits: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit. 2. Gauge Structure of this type tci tricone rock bits: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. 3. Bearing Structure of this type tci tricone rock bits: High precision roller bearing with two thrust faces. Ball lock the cone. Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved. For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
Product Description: 215.9mm IADC137 Industrial standard:SY/T5164 Payment terms: T/T,Western Union,and L/C are acceptable Applications:Medium hard with high compressive strength and high abrasiveness, such as limestone, dolomite, sandstone and chert, etc. Note:other size and IADC is available For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
Our PDC bits are designed with newer abrasion-resistant cutters, and bit designs matched to your specific project lower drilling cost with 1.higher average ROP 2.greater stability 3.greater durability 4.Greater efficiency Drill longer: Our engineers developed a group of cutters for the specific wear issues you encounter. This is the optimum balance between cutter durability and cutter effectiveness with a lower probability of fracture. PDC bit Specifications 1. High wear resistance cutters. 2. Oppose-circumnutation design. 3. suitable for medium to hard formation For more info: www.crossingbit.com Hebei Crossing Drill Bit Manufacture CO.,LTD
Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
Product Main Material Steel,HDPE Quality Control Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product. Applications Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Processing Type: Forging / Material: Carbon steel / Shank type: Cop, Cop gold, DHD, Mission, SD, QL , Mach , BR, wooke / Face design: Flat, Concave, Convex / Tooth design: Spherical, ballistic / Bit size: 2 inches, 2.5 inches, 3 inches, 4 inches, 5 inches, 6 inches, 8 inches, 10 inches,12 inches / Bit Diameter: 76mm~445mm / Apply to: Surface and underground mining, Tunneling, Geological exploration, Quarries, Dam construction, Construction, Water Well / Certification: ISO9001:2008 / Advantage: Heat treatment and CNC machine gives bits longer working life / For more :emma(at)wooke-intl(.)com
Forging / Model : T38, T45, T51 / Bit Dia.: 64mm~127mm / Face Design: Flat, Drop center, Dome / Tooth Shape: Semi-spherical, Semi-ballistic, Conical / Skirt: Standard, Retract / Apple to: Deep drilling, mining / Packing: Foam and Carton or Wooden case, Steel tapes / Origin: China (Mainland) / Material: Carbon steel /
Product Main Material Steel,HDPE Quality Control Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product. Applications Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
