Casing cup tester is designed to be attached to the drill string and then lowered into the casing beneath the wellhead to pressure test the blowout preventer stack and the wellhead. When the cup tester is lowered into the casing beneath the wellhead, pressure is applied to either a test pump, or by hoisting type cup after filling the hookup with water. The latter method is fast and accurate. The cup tester assemblies are rated to the API standard mill test pressure for casing sizes up to 10,000 psi. Special reinforcing can be offered on all cup sizes and casing weight ranges to hold up to 15,000 psi.
TSQ127 /TSQ140 / TSQ178/TSQ245/ TSQ273/TSQ339/TSQ508
XQ series of hydraulic power tongs have inner cam rolling-up clamping mechanism, with a hydraulic backup tong. It is an ideal tool for makeup or breakout of various of tubings, and small sizes of casings and drill pipes in workover operation. The tong with extra long rod is available for backup tong to grip tubing body. The power tong also can be equipped with automatic torque control system.
The tongs are designed and manufactured according to SY/T5074 standard and API Spec 7K specification for drilling and well serviceing equipment
Technical parameters:
Applicable range main tong 60-89mm(2 3/8-3 1/2)
Applicable range backup tong 60-114mm (2 3/8-4 1/2 inch)
Max torque 3300N.m/2213ft.lbf
Speed 30-90rpm
Rated pressure 10Mpa/1450psi
Max. flow 80L/min 21gpm
size 25.6 16.9 21.7inch
weight 158kg/348lb
Type: Nylon sucker rod centralizer, anti- partial-wear sucker rod centralizer, roller type sucker rod centralizer
Size: 5/8", 3/4", 7/8", 1", 1-1/8"
Ucker rod centralizer used in pumping well, it's a tool which can set upright the sucker rod, and protect the sucker rod wiping with tubing pipe, we can product wheel centralizer, rod shaped centralizer, twist centralizer.
Operational principle:
1. Wheel centralizer: When the sucker rod works the wheel rolls on tubing inside. It can avoid the sucker rod to rub with the tubing pipe.
2. Rod shaped centralizer: When the sucker rods work, nylon block touches the tubing inside, it can avoid the sucker rod to rub with the tubing pipe. The nylon block can rotate, then the rub is even wear. The user only change the nylon block replace rod body, can save fabrication-cost.
3. Twist centralizer: Cost of it is low, operate easily.
The Safety Clamp is one of the most valuable tools for well drilling. It helps guard against dropping flush-joint pipe, streamlined drill collars, etc. into the hole while making-up or breaking-out the string. It is necessary tools for drill rig while drilling operation is ongoing.
The Safety Clamp can be deviled into MP, the WA-T and WA-C type.
MP-S /MP-R /MP-M /MP-L /MP-XL
Application: Used as Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressures in oil drilling and natural gas exploration work (including 50D, 70D).
Temperature Range: -30�°C~ 120�°C, or manufactured upon customers' requirements
Hose Reinforcement:2~ 6 layers spiraled by single high-strength steel wire, and rubber as a binder to make the layers into one complete and sound construction
1.Liners combine the strength of a forged steel outer shell with the abrasion and corrosion reisistance of a high chromium iron or high purity ceramic inner sleeve.
2.Feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minmum uniform bore hardness of HRC65, ceramic liner hardness up to HRC68
3. The surface of the liners with a mirror-like smooth finish and the inner holes dimension tolerance is strictly controlled to ensure a long using life of more than 800 hours, ceramic surged fivefold, more than 4000 hours, highest purity up to 7000-8000 hours.
4. Our liner made for superior performance under tough corrosive and abrasive conditions.
We supply all common models of drilling rig mud pump liner in material zirconia ceramic and high chrome bimetal for Emsco, Gardner Denver, National, Oil well, Continental, Ideco, 3NB series mud pump and so on, ceramic liner inner sleeve material is 99.99% zirconia, high chrome bimetal liner is forgings , with chrome content 28%.
1- Drilling Diameters: 4~120mm
2- Thickness of processed glass: 3~20mm
3- Max. of processing glass: 2600x1800mm
4- Power: 2.3kw
5- Weight: 1.0 Tons
6- Occupation area:
2600 x 2600 x 1700mm (L x W x H)
7- With air compressor.
8- XINDONGYA motors (special made)
9- Auto and Manual : Up and down drilling can be drilling automatically.
Weight 26KG
Length 660mm
Cylinder Diameter 80mm
Piston Structure Stroke 60mm
Working Air Pressure Mpa 0.4 0.5 0.63
Full length Rock Drilling Impact Frequency Hz(Greater or equal to) 28 35 36
Drilling Gas Consumption L/s(Less than or equal to) 52 58 82
Impact Gas Consumption J(Greater or equal to) 44 63 70
Rotary Torque N m(Greater or equal to) 15 19 23
Drilling Speed Mm/Min(Greater or equal to) 250 400 470
Noise dB/A(Less than or equal to) 124 125 127
Average linear m before first failure M(Greater or equal to) 400
Drilling Depth Without Dismantling Machine M(Greater or equal to) 300
Inner Diameter of Gas Transmission Hose mm 25
Inner Diameter of water Delivery Hose mm 13
Borehole Diameter mm 34-42
Drill Tail Specification 22x108 ±1
Air leg length(mm) 1400
Advance Stroke MM 965
Cylinder Bore(mm) 65
Harbin DQL-8 compass
1. Damping function enable a quick reading in nine seconds
2 Neodymium(NdFeB) needle, highest magnetic strength permanent magnet
3 Less erro (< 0.5degree), High accuracy
4 magnetic declination adjusting knob & Needle lock button
5 Made by German DMG 5-axis machining center
6 100% inspection, 200 QC items for each compass
7 Anti-rust and anti-corrosion surface, treatment by electrostatic spraying process
Item Specification
Brand Harbin
Model No DQL-8
Damping Time
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
I would like to inform you about that our company, as RDS Machine manufactures and supplies drilling rigs and hydraulic rock drill drifters alternative(aftermarket) spare parts of Atlas Copco, Sandvik, Furukawa and Montabert brands.
Taizhou Kaiqiu Drilling Tools Co., Ltd has been for a long term focus on the "drilling industry" solutions and research. The company recruits the mining industry elite, grasping the core technology (full introduction of Europe's most advanced heat treatment systems) with a number of R&D patents. Kaiqiu people always insist on "change" mode, making bold innovation. It is being a top manufacturing company with a full system of research, manufacture and marketing.
The company has a workshop space of 20000 m2 and more than 200 employees. It professionally produces various DTH hammer, DTH bench drilling, coupling sleeves, drill pipe for mining and construction. There are more than 300 sales service providers in China, and the products are exported to Australia, Africa, and Southeast Asia, etc. The main brand, "Kaiqiu", has set up a high reputation and popularity in the domestic and foreign markets.
The company will strive to improve product cost performance, recognition ratio and comprehensive ratio, committed to the company into the best intellectual property value, the most innovative ability, the most market influence, and make the new meaning.
CHAIN SPROCKET mm ROLLER CHAIN mm
Tooth Width B1 23.5 Chain Pitch 38.1
Hub Configuration B Roller Dia 22.23
Internal Width 25.40 Chain Number 40
Number of Teeth 10-21 Number of Chain Rows 1-2-3
Hardened Teeth Up to customer stock bore sprocket
Black Oxide Up to customer Asian Standard sprocket
Bore Type Stock Bore
