JK830 All-In-One DTH Automatic Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Hydraulic Crawler Drills. Crawler Mounted Drilling Rigs JK830, the new all-in-one DTH drilling rig which features JK Drilling's latest automation technology, is efficient, reliable and easily operational. With a FOPS-approved cabin coming standard, the rig is also equipped with automatic pipe exchanger and widened heavy-duty undercarriage that can provides both fast maneuver and better safety. The hydraulic dust collector meets the requirement of environment protection and is a reliable solution to modern mining with less environmental impacts. More information you can views here Items Specs Unit Value Body Weight kg 24000 Length mm 9785 Width mm 3200 Height mm 3500 Undercarriage Track length mm 3646 Ground contact length mm 2875 Track center distance mm 2200(whole width 2700) Track width mm 500 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking motor Eaton Walking speed Km/h 1.8(low), 2.95(high) Max. tractive force KN 170 Grade ability ° 20° Engine Model QSZ13-C450-30 (Cummins) Type Water-cooled six-cylinder EFI diesel engine Rated power Kw/RPM 335/2100 Fuel tank capacity L 760 Hydraulic pump/valve Main pump Variable load-sensing piston pump Main valve Load-sensing valve Manufacturer Rexroth Air compressor Model Airman SK900 Type Dual stage rotary screw air compressor Working pressure bar 17.5 (medium), 24 (high) Max. air delivery m3/min 23.5 Rotary motor Hydraulic rotation unit Dual motors (Eaton) Rotation rate rpm 0-70 Max. rotation torque N.m 3900 Feeding method Motor-driven planetary gearbox + Chain Fast feeding rate m/ min 30 Feeding rate m/ min 4.7 Max. lifting rate m/ min 5.5 Feeding force kN 0-30 (adjustable) Lifting force kN 30 Feeding boom Length mm 8500 Feeding stroke mm 5500 Feed extension mm 800 Swing angle ° Left 95°, right 35° Drilling arm Type mm Telescopic single straight boom (length 760mm) Tilt angle ° 30°(up), 10°(down) Swing angle ° Left(cabin side)10°, Right 35° Pipe exchanger Pipe diameter mm 102/114 Pipe length m 5 Drilling diameter mm 115-203 Drilling depth m 30 Pipe capacity pc 5+1 Hammer specs 5"/ 6" Dust collector Filter element 20 Collecting method Air pulse jet Dust cover Sliding
JK610 Crawler Mounted Blasting Borehole Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig borehole drilling machine In contrast with pneumatic drill rig, the air displacement of matched air compressor reduces 30% to 50%. JK610 internal combustion (electric) crawler mounted hydraulic DTH drill rig, is the latest updated product of "Sharp Sword" series, featuring its better performance, lower operation cost and humanized design. It adopts a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drilling rigs, JK610 consumes about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. JK610 is equipped with dust collecting system, and wet type dust collector is optional as long as water is accessible on site. JK610 is mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK610 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4148mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-60rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 30° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2000mmÃ?2500mm Weight 6900kg Wired remote control Optional
Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Low operation cost and humanized design. Borehole Diameter 90-165mm Site Condition It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Product Features JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. In contrast with the last generation, they feature lower operation cost and humanized design. They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site. JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg
JK520 Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig It features its compact design, small footprint, and humanized operation. Borehole Diameter 90-150mm Site Condition It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction. Product Features JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project. JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation. JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional. Model JK520 Borehole diameter 90-150mm Borehole depth 40m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 3865mm Rod-changing length 3m Max. horizontal drilling height 2510mm Feed extension 1200mm Ground clearance 300mm Rotation rate 0-79rpm Rotation torque 2500Nm Travle speed 2Km/h, 3Km/h Grade ability 25° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2250mmÃ?2250mm Weight 5800kg Wired remote control Optional
Crawler Mounted Hydraulic DTH Drilling Rig Automatic Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Advanced Technology, easy to handle and operate. Borehole Diameter 105ï½?305mm Site Condition CM458 is applicable to all kinds of anchor supporting operation, grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp makes operation easier. Product Features CM458 internal combustion (CM458D Electric) crawler mounted versatile anchor rig adopts diesel engine and hydraulic oil pump assemblies to provide power, allowing rigs to finish moving, rotating, propelling and lifting, as well as angle positioning. During drillingï¼?only the percussive hammer consumes compressed air. CM458 is applicable to all kinds of anchor supporting operation. In addition, the rig is also applicable to the grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp is a very useful device making operation easier. Model CM458 Borehole diameter 105-305mm Borehole depth 200m Applicable rock hardness f=6-20 Working air pressure 1.2-3.5MPa Air consumption 16-40m/min Feeding stroke 3300mm Rod-changing length 3m Ground clearance 254mm Rotation rate 0-50rpm Rotation torque 5400Nm Travle speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mmÃ?2200mmÃ?2200mm Weight 6200kg
Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%. Borehole Diameter 90-165mm Site Condition CM358A crawler mounted hydraulic DTH drilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions. Product Features CM358A crawler mounted hydraulic DTH drilling rig adopts diesel engine (or electric motor) and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. Model CM358A Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 3820mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-80rpm Rotation torque 3000Nm Travel speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mm Ã? 2200mm Ã? 2200mm Weight 6100kg
Crawler Mounted Versatile Well Drilling Rig Truck Mounted Well Drilling Rig Its smaller size can be adapted to various construction sites. Rated Drilling Depth 300m Application It is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc. Product Features JKS300B crawler mounted versatile well drilling rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells. When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Winch can lift stuff upwards of 6m, facilitating installing pipes. Hydraulic supporters facilitate the rig erection on site without crane. Smaller size makes it adaptable to various kinds of construction sites. Rated Drilling Depth 300m Borehole Diameter 105-350mm Engine Power 92kW Maximum Lifting Force 15T Small Winch Lifting Force 1.5T Rotation Torque 8500N.m Rotation Rate 0-40/80rpm Feeding Stroke 3600mm Lifting Speed 0-18m/min Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min Dimension (L x W x H) 6300mm x 2000mm x 2300mm Working Size (W x H) 3100mm x 6900mm Weight 8.5T
JKS380S Crawler Mounted Telescoping Mast Drill Rig Crawler Mounted Versatile Well Drilling Rig Applicable to various working site. Rated Drilling Depth 300m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS380S crawler mounted telescoping mast drill rig is a new, efficient, multifunctional hydraulic well drilling rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, with the penetration speed being dozens of times quicker than conventional rotation rigs. The rig is able to handle casing size up to 6 meters. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions Hydraulic supporters used facilitate the rig erection on site without crane. Rated Drilling Depth 380m Borehole Diameter 105ï½?350mm Engine Power 92kW Maximum Lifting Force 18T Axial Pressure ±8T Lifting Force of Small Winch 1.5T Rotation Torque 8500N.m Rotation Rate 0ï½?40/80rpm Feeding Stroke 6800mm Hydraulic Support Leg Stroke 1650mm Lifting Speed 0ï½?18m/min Centralizer Height 0.8m Grade Ability 15° Hydraulic Generator 24kW/380V (optional) Dimension (L x W x H) 6200mm Ã? 2080mm Ã? 2650mm Weight 10.5T
JKS400SH Crawler Mounted Telescoping Mast Drill Rig Crawler Mounted Versatile Well Drilling Rig hydraulic drilling rig, hydraulic drill rig The rig is able to place casing of 6 meters. Rated Drilling Depth 400m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS400SH crawler mounted telescoping mast drill rig is a new, efficient, multifunctional hydraulic well drilling rig, mainly applicable to the drilling process of well, monitor boreholes and geothermal boreholes. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs. The rig is able to handle casing size up to 6 meters. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions Hydraulic supporters used facilitate the rig erection on site without crane. Rated Drilling Depth 400m Borehole Diameter 140~350mm Engine Power 92kW Max. Lifting Force 20T Axial Pressure ± 8T Lifting Force of Small Winch 1.5T Rotation Torque 8500N.m Rotation Rate 0ï½?40/80rpm Feeding Stroke 4300mm+2600mm Hydraulic Supporting Leg Stroke 1650mm Lifting Speed 0ï½?25m/min Centralizer Height 0.8m Grade Ability 15° Dimension (L x W x H) 7.4m x 2.25m x 2.85m Weight 13.5T Hydraulic Generator 24kW/380V (optional) Flow of Centrifugal Mud Pump / Flow of Plunger Mud Pump /
JKS1000 Crawler Mounted Versatile Well Drilling Rig Crawler Mounted Versatile Well Drilling Rig hydraulic drilling rig, hydraulic drill rig A new, efficient and versatile hydraulic well drilling rig Rated Drilling Depth 1000m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes, dewatering boreholes, relief boreholes and gas layers and other exploitation projects. Product Features JKS1000 crawler mounted versatile drill rig is a new, efficient and multifunctional well drilling rig, mainly applicable to the drilling process of wells, monitor boreholes, dewatering boreholes, relief boreholes and gas layers and other exploitation projects. When drilling in the rock layer, the rig adopts DTH percussive hammer for penetration and compressed air for cleaning, the penetration speed being dozens of times quicker than conventional rotation rigs. In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. Rated Drilling Depth 1000m Borehole Diameter 140~450mm Engine Cummins 6BTA5.9-C180 (132kW) Max. Lifting Force 37T Lifting Force of Small Winch 1.5T Lifting Force of Main Winch 5T Rotation Torque 24500N.m Rotation Rate 0-40/80rpm Feeding Stroke 5340mm Lifting Rate 0-25m/min Height of Centralizer 0.9m Grade Ability 15° Hydraulic Generator (optional) 24kW/380V Flow of Foam Pump (optional) 20L/min Flow of Centrifugal Froth Pump (optional) / Flow of Plunger Mud Pump (optional) / Dimension (L x W x H) 9160mm x 2250mm x 3340mm Working Size (W x H) 3250mm x 9900mm Weight 16.5T
JKCS300 Truck Mounted Well Drilling Rig Truck Mounted Well Drilling Rig Truck Mounted Water Well Drilling Rig A new, efficient and versatile well drilling rig Rated Drilling Depth 300m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes, geothermal boreholes and grouting borehole of cofferdam. Product Features JKCS300 truck mounted versatile well drilling rig is a new, efficient and multifunctional hydraulic rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, and grouting holes of cofferdam, dam and reinforced base, as well as drilling of open pit mining, anchor reinforcement project and defense project. The rig equips with powerful hydraulic motor, heavy hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs. Specifications of JKCS300 Versatile Well Drilling Rig Borehole Diameter Ï?105-350mm Borehole Drilling Depth 300m Working Air Pressure 1.05-3.05MPa Air Consumption 16-35m³/min Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm Rod Length 3m / 4.5m Grade Ability 15° Winch System ( standard main winch & optional tooling winch) Lifting Force 15t Lifting Height 8m Feed System Axial Pressure ±6t Rotation Torque 4500N.m 8500N.m Rotation Rate 0-80rpm 0-160rpm
high efficiency All In One DTH Drilling Rig With less price and more equipment, JK810, the most cost-effective representation product of JK Drilling and Atlas Copco as the solution to the integration of drilling rig and air compressor, is set to revolutionize your imagination. JK810 is an All-In-One hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. The FOPS-approved cabin and automatic pipe handling system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. General Weight kg 14300 Length mm 9920 (transport) Width mm 2400 Height mm 3300 Undercarriage Track width mm 350 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking speed km/h 2 (low) / 3 (high) Grade ability ° 20° Engine Model QSL8.9-C360-30 Type Water-cooled six-cylinder EFI diesel engine Rated power kw/rpm 264/2100 Fuel tank capacity L 450-500 Air compressor Model Atlas Copco two-stage rotary screw air compressor Working pressure bar 20 Max. FAD m3/min 18.5 Rotary motor Rotation rate rpm 0-85 Max.rotation torque Nm 3300 Feeding method Hydraulic motor + Chain Feeding force kN 12 Lifting force kN 18 Feed Feeding stroke mm 3850 Feed extension mm 1100 Drill pipe changer Drilling diameter mm Φ90 - Φ150 Drilling depth m 21 Pipe diameter mm Φ76 Pipe length m 3 Pipe capacity piece 6+1 Hammer specs 4" - 5" Dust collector Collecting method Hydraulic dust collecting
Drill Pipe When you drill deeper, you need to add the drill pipes until reach the desired depth The drill pipes connect with rotation unit and hammer Diameter with 76mm, 89mm, 102mm, 114mm, 127mm, etc Length from 1 meter to 6 meters Made of high-tensile steel
1.Introduction of YQZ-50A hydraulic core drilling rig YQZ-50A hydraulic core drilling rig is a high, medium and low speed drilling rig with hydraulic pressure feeding. The rig is suitable for geological drilling of complex terrain such as mountains, hills and rivers, engineering geological survey of buildings, and drilling of blast holes. In order to meet the needs of different users, the rig can be equipped with one of three powers of diesel engine, gasoline engine or electric motor. The default is diesel engine power. 2. Features of YQZ-50A hydraulic core drilling rig This model of light weight drilling rig is compact, small and lightweight. The rig can also be dismantled quickly, making it easier to carry the mountain, especially for complex terrain such as mountains and hills. Compared with similar products, this type of portable drilling rig is equipped with a double cylinder hydraulic feeding system, which has a fast drilling speed and high work efficiency. This type of portable drilling machine operation panel is equipped with a pressure gauge at the bottom of the hole to indicate the pressure, so that the operator can adjust according to different terrain conditions. This model of lightweight drilling rig is equipped with a high-performance 4-speed shifting system. It is convenient for the operator to adjust the forward rotation speed according to the geological conditions. In addition, it is equipped with an ultra-low speed reverse gear, which is convenient for the operator to disassemble the drill pipe. The rig is equipped with a fixed clamping mechanism and an integrated main rod, which eliminates the need for a rig and makes the work more compact. 3. Technical parameters of YQZ-50A hydraulic core drilling rig Name Content Model or parameter Rig host Power section diesel engine Rig weight 168kg Drill size 1250*650*1450mm Drill pipe diameter 38mm Drilling diameter 46mm 60mm 75mm Drilling depth 55-60m 50-55m 45-50m Gearbox position 4-speed shift Gyrator Clamp type Fixed clamping type Vertical axis type Hexagonal Vertical axis opposite side length 36mm Vertical shaft length 1400mm Vertical shaft forward rotation speed 220/580/960rpm Vertical axis reverse speed 130rpm Vertical shaft maximum output torque 400n.m Vertical shaft double cylinder stroke 1200mm Double cylinder maximum feed force 7kn Double cylinder maximum lifting force 15kn Double cylinder maximum lifting force 0.035m/s Vertical axis no-load down speed 0.085m/s Hydraulic system Oil pump flow 10ml/r Pressure gauge pressure range 0-6mpa Pump rated pressure 20mpa Hydraulically operated valve position 4files Maximum feed pressure 6mpa(900kg) Maximum lifting pressure 9mpaï¼?1360kgï¼? Hydraulic tank capacity 9l 4. Configuration list of YQZ-50A hydraulic core drilling rig Item Name Model Unit Quantity
1.Brief introduction of YQZ-50B hydraulic core drilling rig The YQZ-50B hydraulic core drilling rig with diesel engine is suitable for geological drilling in complex terrain such as mountains, hills, river courses, engineering geological investigation of buildings, drilling of blasting holes and so on. To meet the needs of different users, the rig can be equipped with one of three kinds of power : diesel engine, gasoline engine and electric motor. And the default is diesel power. 2.Features of YQZ-50B hydraulic core drilling rig The hydraulic core drilling rig is compact in structure, small in size and light in weight. YQZ-50B hydraulic core drilling rig can also be quickly disassemble, is more convenient to transport especially suitable for mountainous and hilly complex terrain work. Compared with similar products, the hydraulic core drilling rig is equipped with dual cylinder hydraulic feed system with high drilling speed and high efficiency. The operation panel of this type of hydraulic core drilling rig is equipped with the pressure gauge of the bottom of the hole to indicate the pressure in the hole, and the operator can make the adjustment according to the different terrain conditions. The hydraulic core drilling rig is equipped with a high-performance 4 gear shift system. It is convenient for operators to freely adjust the positive rotation speed according to the geological conditions. In addition, it also has an ultra slow reverse gear, which is convenient for operators to remove drill pipe drill tools. This type of hydraulic core drilling rig is equipped with automatic hoisting and lifting system, combined with tower, which greatly saves labor intensity and improves work efficiency. The hydraulic core drilling rig is equipped with a ball clip clamping mechanism and a six party active Drilling Pipe, which can realize the non stopping of the pole, and the efficiency is high, and the safety is reliable.
1.Features of XY-130 hydraulic water well drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 2.Specifications of XY-130 hydraulic water well drilling rig XY-130 hydraulic water well drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90 Drill weight (Not include power) 600kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
1.Brief introductions of KY-200 hydraulic exploration drilling rig for metal mine KY-200 hydraulic exploration drilling rig for metal mine is widely used for tunnel and surface geological exploration and can drill the hole from any angle. The KY-200 hydraulic exploration drilling rig for metal mine adopts the structure of all hydraulic power head and consists of three parts: main engine, pump station and operation floor. The hydraulic exploration drilling rig for metal mine is easy to disassemble and is convenient to transport. The drilling rig arrangement is flexible. Drilling pipe screwing and unscrewing is mechanized. It can save labour cost and improve work efficiency. And it has infinitely variable speeds. KY-200 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe through controlling the operation floor. The spindle of the gyration adopts the through hole structure. The length of the drill rod is not restricted by the drilling machine, and it can also be applied to the diamond wire-line coring drilling. 2.Specifications of KY-200 hydraulic exploration drilling rig for metal mine Drilling pipe diameter (mm) 33 43 Output torque (n.m) 81-295 Borehole depth (m) 200 160 Feed capability(kn) 27 Feeding stroke (mm) 850 Pullout capability (kn) 20 Spindle speed (r/min) 600-2000 Motor power (kw) 22
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ø47 Drilling depth (m) 300 (ø43 aluminum alloy drilling pipe) 240(ø43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
