BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. APPLY TO BELOW BOP: Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Technical parameter Specification: 1. Standad: API 16 A and ISO 9001 2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa) 3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm) 4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram 5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP 6.Brand:Shenkai and Rongsheng. 7.Imitate: Camaron and Shaffer 8.U type and SH type Characters of BOP pare parts: In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks. Blowout preventer with spherical plastic core and dust-proof ring. Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use. Working of BOP pare parts: When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm. Note: 1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited. 2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden. 3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
1.Cutter Structure The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques 2.Gauge Structure Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life. 3.Bearing Structure High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed. 4.Seal and Lubracation Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility. 5.Six-Point Position stabilzation Structure The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion. 6. Product Application It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells;
1. Drilling jar is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well. 2. The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately . 3. The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated . 4.The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be allowed after jar is put into downhole.
1. Drilling jar is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well. 2. The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately . 3. The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated . 4.The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be allowed after jar is put into downhole.
API 16C Choke manifold 1.Application Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling,as it is,the device is adopted to execute new drilling-well's technique of balance pressure,which can avoid pollution of oil-layer,improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool.When BOP closes,it can control the finite pressure from casing by adjusting the choke valve's opening,so balanced drilling can work under minimum pressure-difference. 2.Configuration The choke manifold consists of choke valves,gate valves,line pipes,fittings,pressure gauges and other components. 3.Working Principles When the pressure inside the well rises,opening/closing the choke valves(including manual chokes,hydraulic chokes and positive chokes)on the choke manifold can allow the release of the fluid inside the well so as to control casing pressure,which can be directly blown out through the gate valve if the casing pressure is quite high. 4.Pressure Ratings The kill manifold is available in pressure ratings of 2000psi,3000psi,5000psi,10000psi and 15000psi,and also can be available upon customer request.
Dear All, we can also supply all kind of Tooth brushes with blister and calendar packing . tooth brushes can also be print n pack with your own brand if your order meets a Minimum qty. we assure best quality and timely supplies.
Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used. -
Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used. -
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm. Note: 1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited. 2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden. 3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages. -
Dual-wall drill pipes is used for R. C. drilling, when it works, circulating medium is following through the gaps between the dual-wall pipes, carrying samples out of the holes efficiency, meanwhile, it can protect the hole from collapse, matching up with our R.C. air(water) swivel, GQ air-driven hollow DTH hammer can complete getthe samples constantly. -
Drift is a simple and general tool designed to measure inside size of casing, tubing, drill pipe and other pipes. Our Services: 1.High quality products with favorable price at right delivery. 2.Customized products. 3.Warranty. 4. When enquiry, please kindly advise below: Size: drift size & casing (tubing) spec if necessary Material: metal/ nylon or something else Quantity Port of destination if you need CNF or CIF price Your ideal delivery date if you need the goods urgently -
TSP-40 man portable drilling rig was designed in 2003 and adopted international advantaged technology. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the requirement of HSE. The rig is a kind of high efficiency and applied equipment for petroleum seismic crew. The rig can be disassembly into 10 modules, and each module weight was not exceed 100kg. The rig includes two sections: The first section is the main-rig section in which the rotarying and pulldown of the rig is realized by an engine driving a hydraulic pump via belt. The second section are air compressors I which two engines respectively drive two air compressors which supply downhole hammer with air as the motive force, and as the well washing medium. The rig totally needs three engines as the power. The rig has the advantages of light-weight, simple construction, easy to assemble, disassemble, transport and operate. The drilling rig can be work at -10â??and +55â??, 0-3000m height above sea level, ambient temperature in dusty environment. If you are also interested in other drilling rigs contact EveryChina site, Zhuozhou Threesource Company for detail contact.
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function. Main technical parameters: Max drilling depth Mud drilling: 150m, air drilling: 80m Drilling method Mud drilling, air drilling Drilling tools Drill bits (dia) Ф114mm Drilling pipe (DiaXLength) Ф60�4500mm Power swivel Output torque 3400N.m Output rev. scope 0-160 r/min Pull-up & pull-down system Max pull-up force 32kN Feed rate 0�0.4m/s Max Pull-up rate 1.7m/s Hydraulic system Oil pump rev. 1600r/min Working pressure Rotating 17MPa Pull-down 12MPa Mud pump Pressure 3MPa Flow rate 300L/min Screw air compressor Pressure 1.2 MPa Displacement 12.5 m3/min
Tungsten Carbide Drawing Dies Used for wire,bar and tube.We produce various tungsten carbide drawing dies which are used to draw ferrous and non-ferrous products.
Tungsten Carbide Cutting Wheels Our standard tungsten carbide cutting wheels have been well known and utilized throughout thin, flat glass cutting industries, tile cutting, used for all-purpose, ordinary cutting, etc. The cutting process is clean and fast, (smooth, clean afterbreak edges and high yield), requiring no oil or other lubricant. We can send you some samples for your testing. Welcome your enquiries. Samples and quotation will be given upon receipt of your enquiry.
Tungsten Carbide Gear Hobbing/ Gear Milling Cutters We produce various of tungsten carbide gear hobbing cutters, they can be made according to customers' request. No minimum order quantitiy. Please contact us for details. Samples and quotations will be given upon receipt of your inquiry.
Product name:12 1/4" iadc537 tricone bit/rock roller bit for warer well drilling Model:12 1/4" iadc537 Type:tci rock roller bit Wob:0.35~1.05kn/mm Rpm:110~40 Usage: water well drilling Suitable formation:medium soft with low compressive strength and harder avrasive stringers, such as hard shale, hard gypsolyte, soft limestone, sandstone and dolomite with stringers, etc. Hebei crossing drill bit manufacture co., ltd is a professional supplier of drilling tools, including tricone bit, pdc tricone bit, hole opener, single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field, profile optimization, design of inserts arrangement and low torque, material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas, mining, geothermal, construction and so on. The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the united states, england, canada, brazil, russia, italy, iran, saudi arabia, korea, india, and poland and so on.
Product name:16" hole opener for horizontal directional drilling Model:16" hole opener with 5 pcs of 8 1/2" roller cones Usage:horizontal directional drilling Hebei crossing drill bit manufacture co., ltd is a professional supplier of drilling tools, including tricone bit, pdc tricone bit, hole opener, single cone bit and so on.With years of study and refining of the introduced technology, we have succeeded in the field of product research with proprietary intellectual property rights.Also, we have made major breakthrough in the lines of analogue simulation in bottom-hole flow field, profile optimization, design of inserts arrangement and low torque, material and manufacturing techniques etc. As a result, our products own better characters of service and ranges of application.Mainly used for oil and gas, mining, geothermal, construction and so on. The products of our company have achieved industrialization and serialization.Besides our company has always laying importance on the technical exchanges and cooperation with the counterparts both at home and abroad.Our products have been sold all over the world, including the united states, england, canada, brazil, russia, italy, iran, saudi arabia, korea, india, and poland and so on.
we are a well reputed firm here in brandth road lahore Pakistan we specialized in tolls and machinery mostly we are perfect in Hand, Cuttimg ,Power and Auto tools we provide the quality and price that the customer required as we reside on branndth road we also manufactures the machnery like lathe machines, trainers and as well the quadrants on the customer demand.we are member of Kraft Germany and also hold the distribution of Pro's kit tools . we provide local n imported tools as the customer demands.we are in business of this area of field for more then 10 years , quality n customer relation are the main targets of our firm thats why we are dealing from 10 years with faith n belief ,
